Nubia z7max how to brush back 1 38

hi！You can check it out here.

In addition, the operation of Shuangqing is as follows: 1. Press and hold the volume up button + power button in the shutdown state, release the power button after the phone vibrates and restart, and keep pressing the volume button until it enters recovery mode;

2. Use the volume up and down keys to move the cursor, move the cursor to the wipe data factory reset line, and then press the power button to select it;

3. Use the up and down keys of the volume to move the cursor, move the cursor to the yes--delete all user data line, and press the power button to select;

4. At this time, the phone will perform a factory reset operation, and then the phone will return to the main menu;

5. Also use the up and down keys of the volume to move the cursor, move the cursor to the wipe cache partition row, and then press the power button to select;

6. Use the power button to select the reset system now, the phone will automatically restart, and the double clearing will be completed.

If you have any questions, please go to Nubia's official website.

The operation is as follows: 1. The official website ** complete package, press and hold the volume up button + power button in the shutdown state, release the power button after the phone vibrates and restarts, and keep pressing the volume button until it enters recovery mode;

2. Use the volume up and down keys to move the cursor, move the cursor to the wipe data factory reset line, and then press the power button to select it;

3. Use the up and down keys of the volume to move the cursor, move the cursor to the yes--delete all user data line, and press the power button to select;

4. At this time, the phone will perform a factory reset operation, and then the phone will return to the main menu;

5. Also use the up and down keys of the volume to move the cursor, move the cursor to the wipe cache partition row, and then press the power button to select;

6. Use the power button to select the reset system now, the phone will automatically restart, and the double clearing will be completed.

After backing up the data double clear, you can directly swipe the full package,Now that you've swiped the latest version,The operation steps should be understood.,It's all the same.。

1. No signal, activation problem:

Left-click the menu--- General Settings--- Wireless & Network Settings--- Mobile Network Settings--- CDMA Subscription (switch to Ruim SIM mode), then switch your phone to airplane mode, and finally switch to airplane mode to activate.

3. MMS problem:

Open the APN settings, since most of the selected access points are CTNet, open the CTNet settings and set them as follows::

Write :http:in mmsc

MMS** writes:

MMS port selection: 80

This sets up MMS for CTNet**, which can make Bi Duoxiao choose CTNet networking mode to receive MMS as usual.

4. Stuck on the boot screen:

Generally, it is stuck on the boot screen because there is no double clear operation, you can try to double clear before each flash.