How to become a good road and bridge engineer from a recent graduate

1.It's not good to be hard-working and don't want to work here because you don't want to see others easy and rich. Just graduated, where to go is almost the same, you can tell yourself, I am now more tired than others, the harvest must be more than others, just graduated, the operational skills learned are the most important, I am still so young, what are you afraid of!

2.While working, there are plans and goals to take several registration certificates, such as constructors. When I first graduated, my mind was still a little hot, but after working for many years, it would be difficult to concentrate on reading.

We can't just be a small technician for the rest of our lives, but if you don't have a registration certificate, you can only be a small technician. Besides, if you take a few certificates, you can still get some money, your income will also increase, and your status will also improve!

3.Stick to professional ethics. When I first entered the university, our teachers said in class that people in our industry have one foot outside the prison and one foot inside the prison, and if they are not careful, they may be dragged into the prison.

During the work, you will find that there are a lot of cutting corners, there are a lot of unqualified, we have the ability, we should try to put forward our own opinions and suggestions, even if we can't stop this behavior, but we must not do it ourselves! Come on!

If you want to become an excellent hydraulic engineer, you first need to have a solid basic knowledge of fluid machinery, and then you need to be able to enter a regular large-scale company to exercise yourself, and you should not be afraid of being tired or dirty when engaging in machinery, no matter what it is.

Bridge engineers have always lived by experience, and the older they get, the more valuable they are. I'm a little older than you and graduated from graduate school. The key point is to do the actual project, and learn to summarize, learn to accumulate, don't finish one and don't think about it, to study the stress characteristics of each bridge type clearly, and have the opportunity to contact the comprehensive work, from design to review and calculation to construction monitoring.

The most important thing is to be familiar with the specifications, no need to memorize them, that is, you can quickly find the **.

1. Preparation for University Bridge Majors: 1. Mathematics is the foundation: including advanced mathematics, statistics and other mathematics courses are the foundation 2. Mechanics is the tool

Theoretical mechanics, material mechanics, elastic mechanics, hydraulics, soil mechanics, and structural mechanics are tools to solve bridge problems. 3. Reinforced concrete (structural design principle) is the basis of the profession. 4. Bridge engineering, tunnel engineering, road survey, roadbed, and pavement are professional courses.

The above list is the key course of this major. 2. Future planning 1. Postgraduate examination In the future, there is a better chance of going to the design institute than God Socks. 2. After graduating from the bachelor's degree, go to the construction unit to lay a foundation for 3-5 years (1) The first-level construction engineer will be changed to engage in construction project management (2) Transfer to the supervision industry to take the national registration supervision to engage in project consulting and supervision (3) Enter the owner's unit and engage in project management.

4) Of course, you can also take the public institution or civil service examination with related majors. (Hail blind judgment 5) maintenance and repair, bridge inspection is also an option for bridge engineers.

With the acceleration of national infrastructure construction and the advancement of urbanization, the demand for this field has also been growing. Therefore, I believe that graduates majoring in roads and bridges will find jobs more easily, and they also have good employment prospects.

Is it easy for college students majoring in roads and bridges to find a job?

Is it easy to find a job after graduating from road and bridge: Graduates of the road bridge socks Zen beam major are still relatively popular in the current market. With the acceleration of national infrastructure construction and the advancement of urbanization, the demand for this field has also been growing.

Therefore, I believe that graduates majoring in roads and bridges will be more likely to find a job, and they will also have good employment prospects.

Graduates of the Road and Bridge major, Pai Zaoyu, are mainly involved in the design, construction, and management of road and bridge projects, and these skills are very necessary in the construction of roads, bridges, railways and other infrastructure. In addition, due to the continuous emergence of new fields and technologies in recent years, such as intelligent transportation, highway energy conservation, etc., road and bridge professionals with strong interest and research ability in these emerging fields have attracted much attention. In general, in the field of infrastructure construction and operation, road and bridge construction, as well as related first-class institutions and enterprises and institutions, graduates of road and bridge majors have good employment opportunities and development prospects.

Is it easy to find college students?

It's also easy to find, and the prospect is taught.

What is the employment rate of college students majoring in roads and bridges?

The average employment rate for road and bridge majors is around 70%, but this data does not necessarily apply to all regions and all schools. The actual situation generally varies according to the region, the school and the personal quality of the graduates. Defeated.

Is it easy to get a job here in Zhoukou?

Regarding the employment situation of college students in the road and bridge majors in Zhoukou area, I can say with certainty that the prospect of employment is still relatively optimistic, but the specific situation still depends on personal ability and regional market demand.

After graduation, you can be engaged in construction and supervision work in units related to road and bridge engineering technology, and can also be engaged in Nachai design work in the corresponding design department, and can also be engaged in technical management in the relevant quality supervision department of the first class.

If you choose a road and bridge major, you need to change majors in the category of this major, such as underground and tunnel engineering technology, construction engineering technology, etc. The specific major to change depends on your personality and suitability to study that major. If you change to a major you don't like, it will be more inconvenient to work in the future.

As a junior college, I think it is the most promising of all majors, because road and bridge design is a relatively stable profession and will not run around for life. You can have a lot of spare time to learn and improve yourself and further expand your industry field.

This major can also pass the self-examination, get a bachelor's degree, and then pass the examination to get the registered engineer certificate, and can also become an expert in the profession to engage in various evaluation activities, and the activities are well paid.

It is a very good choice to learn road slip and bridge engineering technology, because road and bridge are a very important part of the field of infrastructure construction, and they have a wide range of applications in modern society. The Road & Bridge Engineering Technology major offers many promising career opportunities, including designing, building, maintaining, and managing infrastructure such as roads and bridges. In addition, with the increasing demand for urbanization and transportation, the employment prospects for road and bridge engineering technology majors are also very good.

If you are interested in the field of architecture and engineering and want to apply this knowledge in a real-world application, then studying road and bridge engineering technology is a very wise choice.

The road and bridge engineering technology major is a comprehensive and large major, involving the design, construction and maintenance of traffic and transportation engineering such as roads, bridges and tunnels. Although this major involves the design and construction of bridges, if you want to engage in a full-time bridge engineer position, you usually need to have a more professional engineering and technical background and relevant qualifications required by the position.

Specifically, becoming a qualified bridge engineer typically requires the following qualities and qualifications:

1.Strong engineering and technical ability, solid theoretical foundation, proficient in the design, construction and management of bridge engineering and other technical points.

2.Familiar with industry standards, norms, laws and regulations and other cultural qualities.

3.Proficiency in the use of software and tools related to bridge design, construction, and management, such as AutoCAD, Bridge Designer, etc.

4.At least intermediate and above Internet of Things engineer, second-level building erector and other relevant professional qualification certificates.

On the whole, after graduating from the road and bridge engineering technology major, you can engage in the design, construction management and other related work of bridge engineering, but if you want to become a qualified bridge engineer, you also need to repair relevant technical courses according to industry requirements and obtain relevant vocational qualification certificates.

1) Visualization: BIM 3D model makes the process of project design, construction, operation and maintenance visible, so as to facilitate communication, coordination, discussion and decision-making. (2) Coordination, if there is a conflict between the pipeline and the structure, and there is an error in the size of the reserved opening, when these incompatibilities occur, the use of BIM coordination process can reduce unreasonable change schemes. (3) Simulation: By establishing a three-dimensional model, the accuracy of the model can be simulated, each building structure can be dismantled, and seismic analysis can be carried out.

4) Effectiveness and scientificity, BIM technology can make the management means informational, quickly carry out the corresponding construction management, and make the engineering construction more orderly. (5) Remote supervision, BIM technology can monitor the production, transportation, acceptance and hoisting of prefabricated components, and realize the whole process of prefabricated assembly. The supervision and analysis of each building trembling link can be carried out to realize data sharing and collaborative management, and the construction party can be effectively urged to improve the construction quality of the project.