How to reinstall the system on a 7 up laptop

You can install it directly with a CD or a USB flash drive.

See if there's a file to save or something.,If there's any.,Copy it out first.,Finish the CD-ROM U disk installation can be.。

Hello and thank you for using 7UP products!

Hello, customer.

Take the installation of the Windows 7 system as an example:

1. Insert the Windows 7 system disk (CD-ROM or U disk) into the computer.

2. Restart the computer, enter the BIOS, and set the system disk as the preferred boot device in the BIOS.

The BIOS settings are different for different motherboards, please refer to the manual of the motherboard to set them up.

3. After restarting, the system starts to boot from the system disk, and after booting, it is installed normally.

4. Complete the system installation according to the prompts of the installation program.

Note: 1. Please use the original installation disk for installation, and no third-party software is required to install the system.

The driver disc is installed after the system is newly installed. You need to back up the required data, format the system partition, then reinstall the system with the system disk (CD-ROM or PE), and finally use the included drive disk to install the motherboard and other drivers.

That's a drive disk, not a system disk, and you need to prepare a separate system disk to install it, purchase it, or engrave it yourself.

It's the same as any other computer, you can reinstall it and try again.

Computers are all the same installation system.

Hello and thank you for using 7UP products!

Hello, customer.

In the case of models with optical drives:

Please place the system disc in the computer CD-ROM drive, the CD-ROM drive reads the data (our computer is generally the CD-ROM drive as the first driver item), and then follow the system installation method, if it is a Microsoft system, you can refer to the Microsoft system installation method, or seek Microsoft assistance in installation. After installing the system, use the driver disc to install the driver.

If it is a Kirin Linux system that comes with it, you can refer to:

Kylin Linux does not need to install drivers.

If the model does not have an optical drive:

Please use a USB flash drive or an external optical drive to mount the system. Please set the USB flash drive or external optical drive as the first boot item in the BIOS.

The method of installing the system on the USB flash drive can be found at:

The method of installing the system with an external optical drive is the same as that of an internal optical drive.