Windows 7 Explorer is not responding

1) Slow boot or stuck:

Don't operate it immediately after booting up, because the program is loading when you boot up, and you will try it in operation later, if it takes too long, look at the following method.

You disconnect the network cable and try to turn it on, if there is no problem, it is caused by slow boot networking, and it has nothing to do with the system (if it is a network problem, try to set a fixed IP).

If it is not caused by slow networking, first soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, don't install them if you find something that isn't suitable (if it's a hardware problem, please overhaul it, such as hard disk, etc.).

2) If this is always the case, first soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, don't install anything that doesn't fit (if you have any questions, please ask me).

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

3) In terms of hardware, such as whether there is a problem with the hard disk, memory, etc., whether the temperature of the CPU and other hardware is high, if it is caused by hardware problems, it is recommended to overhaul it.

The software may be installed too much, use 360 to check large files, delete too large and unnecessary files, and try again!

I don't know how to continue asking

One of the more annoying problems that often occurs under win7 is this "explorer is not responding", so how to solve win7 explorer unresponsive? I have shared the way to fix Win7 Explorer unresponsive, I hope it will be helpful to you all.

Win7 Explorer Becomes Unresponsive Workaround

Scenario 1: Fake death at startup.

After booting into the desktop, the mouse becomes a circle and is busy turning, which will last for a long time, and if it ends, there is only a forced shutdown, which is a boot fake.

There are many reasons for the startup feigned death, which can be seen from several aspects:

1. Overclocking may also lead to such a problem, if you find such a problem when overclocking, try to reduce the frequency of the external frequency and memory, or do not overclock for the time being, and see if you can solve the problem.

2. It's best not to install all kinds of so-called win7 lite and optimized versions. According to the author's personal experience, as long as the hardware is a primary dual-core processor and more than 1GB memory, this problem will basically not occur when installing the original system, so there is no need to streamline and optimize it at all.

3. The use of optimization software should be moderate, and it is recommended to use optimization software to set some system auxiliary functions, such as cleaning the right-click menu, enhancing the send function, etc., but do not easily change the core settings of the system.

This can be due to the large number of thumbnails created, which can easily occur if the computer is poorly configured.

The solution to this problem is very simple, open any file and change the "View" in the upper right corner to "Small Icon". Then click "Organization", select "Folders & Search Options", switch to "View", and check the box in front of "Always show icons, never show thumbnails".

Scenario 3: Inexplicable fake death from time to time.

From time to time, inexplicable fake death is manifested in the fact that sometimes there will be no problems for a long time, and sometimes there are continuous problems, which is the most annoying, because there is no specific operation that leads to the occurrence of failures, so it can only be considered from the big picture.

1. Update the drivers of the hardware, mainly the drivers of the graphics card, motherboard and network card, the driver of the beta version should be used with caution, and it is best to install the whql driver that has passed the Microsoft certification.

2. The reason for this problem may also be the setting of the power management plan, the default power management plan of the system has three types: energy saving, balance, and high performance, in which the hard disk is set to shut down after a certain time. Set the time inside to 0 and you're good to go.

1. Move the mouse to the taskbar, right-click the mouse to find the "Start Task Manager (K)" at the arrow position in the pop-up page and click.

2. At this time, the "Windows Task Manager" page will pop up, click the file (F) at the top, and find "New Task (Run)" in the drop-down box. and click.

3. Enter the command in the box after Open (O): and click OK.

4. Click on the magnifying glass position below and enter the command regeidt.

Hkey Current User Software\Microsoft Windows CurrentVersion Policies registry key.

6. Right-click on the policies registry key, find New (n) and find the key (K).

7. Rename the newly created registry key to system, then right-click the system registry key, and then click the new dword (32-bit) value menu item.

8. Rename the newly created registry key to disabletaskmgr.

9. Double-click the disabletaskmgr registry key, modify the value to 0 in the properties window, click OK, and restart the computer to solve the prompt"window7 explorer is not responding".

It may be a hardware problem, a hard disk problem, and look at the system log for disk errors. In terms of software, antivirus, disable non-essential startup items, and clean up the system with Windows Cleanup Assistant. Clean up the garbage. If that doesn't work, it is recommended to reinstall the system.

Try this method:

1.Open the Task Manager, click "File", and then click again"Create a task", in"Open"Tick OK at the end.

2.Find Winrar, point"option" ，"Settings"，"General"

Integrate WinRar into Explorer", I hope to learn from everyone here and help each other!

It may be that your background service has been opened a lot, find a tool to optimize it!

Here for you to bring about win7 resource management manager unresponsive solution,Resource manager unresponsive is a problem that many users often encounter,The computer is stuck from time to time for a period of time,It's always annoying,Especially when you're dealing with work, it's more frustrating,So in what cases will win7 have such a problem,And how to solve it?

Finally, overclocking can also cause such problems, if you find such problems while overclocking, try to reduce the frequency of the external clock, memory, or temporarily do not overclock to see if it can solve the problem.

win7Crash while the system is copying a file

win7The system crashes when opening a folder with a large number of thumbnails

Many users often experience a crash in the explorer when opening a file that contains a lot of ** or ** files. The reason for this may be due to the need to create a large number of thumbnails, which can easily occur if the computer is poorly configured. Open any file and change the "View" in the upper right corner to "Small Icon".

Then click on "Organize", select "Folders & Search Options", and in the "View" settings, put the box in front of "Always show icons, mega segments never show thumbnails" on the side guess pants.

If there is a problem with the hard disk, it is recommended to check it with a disk check tool.

It's a slow response.

It would be nice to wait a little longer.

There is a patch that hangs down for the explorer. Try. There are optional patches in 360.