Find the process of disassembling the Dell 1525 in detail 50

Dell's notebooks are all modular and easily disassembled. All you need is a Phillips screwdriver. If the machine is not disassembled, it must be that the screws have not been removed, so look carefully.

In this case, it is recommended that you send it for repair to find a professional to help you disassemble and clean up, your own inexperience is too risky, I will help you in Beijing.

Summary. Hello dear, Step 1: PreparationPrepare the tools (fine Phillips screwdriver, flathead screwdriver, tweezers, blades, soft cloth) and the notebook to be disassembled.

Step 2: Remove the battery with the back of the laptop facing up, open the battery's fixed lock, and remove the battery. Step 3:

Remove the back guard to remove the fixing screws of the two guard plates on the back of the notebook and remove the guard plate. Step 4: Disassemble the hard drive, unplug the hard drive cable, and take out the hard drive.

Step 5: Remove the network card from the data slot, gently pull out the network card, gently pry open the metal card of the power cord, and take out the network card. Step 6:

Remove the buckle bar to turn the front of the notebook up, open the LCD screen, gently pry the upper buckle bar of the keyboard and turn it up, and then open the cable connected to the motherboard and take out the buckle. Step 7: Disassemble the keyboard and gently pry the keyboard open and flip it up (be careful not to tear off the cable below), disassemble the cable and remove the keyboard.

Step 8: Disassemble the LCD screenThe two connecting cables between the LCD screen and the motherboard, including power and data, unscrew the display fixing screws, and take the display screen. Step 9:

Remove the touchpad Gently disassemble the cable connecting the touchpad from the motherboard, and remove the main case of the touchpad. Step 10: Remove the optical drive, remove the fixing screws, and remove the optical drive, heat sink and fan on the back.

Step 11: Disassemble the motherboard, unplug the socket of the cable and the next line, and then, pay attention to the connecting cable below when removing the motherboard, and remove the motherboard and accessories. Step 12:

Detach the memory and gently push the memory module to both sides to fix the metal clip, the memory module will bounce up, and then, pull out the memory module.

Hello dear, Step 1: PreparationPrepare the tools (fine Phillips screwdriver, flathead screwdriver, tweezers, blades, soft cloth) and the notebook to be disassembled. Step 2:

Remove the battery with the back of the laptop facing up, open the battery's fixed latch, and remove the battery. Step 3: Remove the back guard Remove the fixing screws of the two guard plates on the back of the notebook and remove the guard plate.

Step 4: Disassemble the hard drive, unplug the hard drive cable, and take out the hard drive. Step 5:

Remove the network card from the data slot, gently pull out the network card, gently pry open the metal card of the power cord, and take out the network card. Step 6: Disassemble the buckle bar and turn the front side of the notebook up, turn on the LCD screen, gently pry open the upper buckle bar of the keyboard and turn it up, and then open the cable connected to the motherboard, and take out the buckle and cover strip.

Step 7: Disassemble the keyboard and gently pry the keyboard open and flip it up (be careful not to tear off the cable below), disassemble the cable and remove the keyboard. Step 8:

Disassemble the LCD screen: Disassemble the two connecting cables between the LCD screen and the motherboard, including power supply and data, unscrew the display fixing screws, and take the display screen. Step 9: Remove the touchpadGently disassemble the cable connecting the touchpad from the motherboard, and remove the main case of the touchpad.

Step 10: Remove the optical drive, remove the fixing screws, and remove the optical drive, heat sink and fan on the back. Step 11:

Disassemble the motherboard and unplug the sockets of the cables and the next wiring, and then, pay attention to the connecting cables below when disassembling the motherboard, and remove the motherboard and accessories. Step 12: Remove the memory and gently push the memory module to both sides to fix the metal clip, the memory module will bounce upward, and then pull out the memory module.

Step 13: Disassemble the CPU, release the metal clip of the CPU, and pull out the CPU.

I haven't dismantled it, but I just dismantled a 1464 the day before yesterday, I don't know if it will help you. Take the battery off first, there are two more screws behind the battery, and remove it as well.

2.After removing all the screws, the optical drive is gently taken down, and there are three more screws on the back of the optical drive.

3.After these are done, the first thing to do is to take down the top piece of the keyboard, there is a buckle behind the battery, be careful not to break it, you may have to use a little force in the process of taking it, and pay attention to the wire.

4.After taking it off, you can see that there are two screws on the keyboard, remove it. Remove the keyboard and make sure there is a connection.

5.Finally, the entire panel is removed and the entire panel can be slowly loosened by removing the loose screws on the optical drive. Then take it.

The whole dismantling process is basically over.

Step 1: Preparation.

Prepare the tools (fine Phillips screwdriver, flathead screwdriver, tweezers, blade, soft cloth) and the notebook to be disassembled.

Step 2: Remove the battery.

With the back of the laptop facing up, open the battery's retention latch and remove the battery.

Step 3: Remove the back guard.

Disassemble the fixing screws of the two guards on the back of the notebook and remove the guards.

Step 4: Remove the hard drive.

Unplug the hard disk cable and take out the hard disk.

Step 5: Disassemble the NIC.

Gently pull out the network card from the data slot, gently pry open the metal clip of the power cord, and take the network card out.

Step 6: Remove the buckle bar.

With the notebook facing up and the LCD screen on, gently pry open the upper buckle bar of the keyboard and turn it up, and then open the cable connected to the motherboard and take out the buckle.

Step 7: Disassemble the keyboard.

Gently pry the keyboard open and flip it up (be careful not to tear off the cable underneath), disassemble the cable, and remove the keyboard.

Step 8: Disassemble the LCD screen.

Disassemble the two cables between the LCD screen and the motherboard, including power and data, unscrew the display fixing screws, and take the display screen.

Step 9: Disassemble the touchpad.

Gently disassemble the cable connecting the touchpad from the motherboard and remove the main case of the touchpad.

Step 10: Disassemble the optical drive, etc.

Remove the fixing screws and remove the optical drive, heatsink and fan on the back.

Step 11: Disassemble the motherboard.

Unplug the sockets of the cable and the next cable, and then pay attention to the cable below when removing the motherboard, and remove the motherboard and accessories.

Step 12: Disassemble the memory.

Gently push the memory module to the sides to secure the metal clip, the memory module will pop up, and then pull out the memory module.

Step 13: Disassemble the CPU

Release the metal clip of the CPU and pull out the CPU.

Disassembly steps:

Remove the back. First remove the battery, then remove all the small covers on the bottom shell, and then unscrew all the screws on the bottom shell, only one screw of the optical drive is fixed, and directly pull it out after unscrewing. After taking out the optical drive, unscrew the three screws under the optical drive.

Remove the keyboard box. After all the screws on the back are unscrewed, come to the side of the keyboard, and you can directly cut out the frame of the keyboard, but there are some small plastic hidden buckles around it to be careful not to break.

Disassemble the keyboard. After the keyboard frame is taken down, you can see that there are several screws on the upper side to fix the keyboard, unscrew the screws and turn the keyboard up, unplug the keyboard cable at the back, then the keyboard can also be taken down directly.

Dismantle the C shell. After the keyboard frame and keyboard are removed, unscrew the screws that can be seen under the keyboard, remove the cable of the touchpad, and remove the C shell.

Remove the hard drive. There is a cable on the top of the hard disk that connects the motherboard to the external small board, first remove the cable, and then unscrew the screws that hold the hard disk and remove the hard disk.

Remove the motherboard connectors and screws. There are many interfaces for built-in functional devices on the motherboard, such as speaker cables, fan cables, microphone interfaces, screen cable interfaces, etc., and there are many screws marked with numbers on the motherboard.

Remove the screen cable interface, the screen cable interface is a relatively large and fragile interface, and it is extremely important. When removing the screen cable interface, be sure to pay attention to the amount of force.

After all the connectors on the motherboard have been processed, the protective plate can be taken out, and the heatsink is fixed to the CPU, and it can be removed by unscrewing four screws.

The machine is reversed, there are many small covers on the back, and the one with a right-angle turning shape can be opened to contact the fan with a cotton swab. If you want to completely disassemble the fan, I'm sorry, I dismantled the computer completely, and the last one to be removed is the fan. Dell's design is brain-dead.

Hello: If you are not familiar with disassembly, I hope you do not operate like this, it is recommended that you contact the after-sales department to serve you.

You can call Dell's after-sales service** consultation: fixed** dial 800-858-2969; Call 400-886-8610 from your cell

Dell Workshop Tracking** for you

It's better to go to the repair station, the cost is not large, and it is also safe.