How to prevent clothes from being worn out by the washing machine, please tell me

Before washing with the washing machine, soak the laundry detergent for a while before washing, the working principle of the washing machine is to produce a strong water flow by the rapid rotation of the bottom of the washing machine, so that the clothes, the water flow, and the wall of the cylinder rub against each other and decontaminate, and it is convenient to take the clothes, but it is easy to have a washing dead end, large water consumption, serious winding of clothes, and large wear and tear on clothes. The drum is to tilt the inner cylinder to a certain degree, half friction, half beating, the friction of the clothes is slightly smaller, although the washing effect is slightly worse, but it is much cleaner than the wave wheel, and its standard procedure is one washing, three rinsing and four dehydration. As you said, some expensive and important good clothes should be dry cleaned as much as possible, bed linen and the like should be washed in a washing machine, and ordinary clothes should be soaked for a while, supplemented by hand washing, so that the protection of the clothes can be better.

The use of washing machines will have a certain degree of wear and tear on the clothes, and the methods to reduce wear and tear are: 1. According to the nature of the clothes and the degree of dirt, master the washing time and three ways: weak washing, medium washing, and strong washing; 2. The water volume of the laundry bucket should not be less than the specified amount (generally 20 kg of water per kilogram of clothing), otherwise the clothes cannot float and will directly rub against the wave wheel; 3. Each laundry should not be less, otherwise the turning and wear of the clothes will be aggravated due to the light load.

What should I do if the washing machine wears out the clothes? I have a little trick up my sleeve to protect my clothes from wear and tear.

1. According to the nature of the clothing and the degree of dirt, master the washing time and three ways: weak washing, medium washing and strong washing.

2. The amount of water in the laundry dust dismantling bucket should not be less than the specified amount (generally 20 kg of water per kilogram of clothing), otherwise the clothes will not float and will not be distributed, which will also increase the chance of direct friction between the clothes and the wave wheel, and it will be easier to grind and dig the difference.

3. Each laundry should not be less, otherwise the turning and wear of the clothes will be aggravated due to the light load.

Buy a few nylon laundry bags to pack up expensive clothes and wash them. It won't break. **Sold on.

Hand scrubbing or washing in a washing machine will cause a certain degree of wear and tear on the fabric. Most of the laundry buckets in washing machines are made of aluminum alloy, enamel, plastic, etc., with smooth and seamless inner walls, and the wear rate of clothes is very low, which is generally equivalent to the wear rate of board brushes and washboards. For example, the longer you wash and the heavier you wash, the more you wear out.

Therefore, in order to reduce the wear and tear of the split-ridge, it is necessary to master the appropriate washing time and washing intensity according to the nature of the fabric and the degree of soiling. In the washing machine, according to the different situations of the rotation and pause of the wave wheel, it can be divided into three ways: weak washing, medium washing and strong washing.

Weak washing is a rotation of the wheel for 3 seconds, then stationary for 7 seconds, then reversed for 3 seconds, and so on until the predetermined washing time is reached. In the middle wash, the wheel rotates for 26 seconds, then stands still for 4 seconds, then the wheel reverses for 26 seconds, then stops for another 4 seconds, and the cycle continues until the scheduled washing time. Strong washing is when the roller rotates continuously in a certain direction until it is cleaned.

Most washing machines are only equipped with a control circuit for medium washing, and there is no weak field washing and strong washing gear. When weak and strong washing is required, as long as the washing time is appropriately reduced or increased. Generally, cotton cloth, blended fiber, good and other clothing materials are suitable for washing.

Silk, silk, wool and other high-grade clothing should be used for weak washing. For particularly dirty workwear, only disturbing fabrics with a thick texture, such as canvas, labor cloth, and thick fleece blankets, need to be force-washed. In addition, the amount of water in the laundry bucket should not be less than the specified amount, otherwise the clothes cannot float, and it will directly rub against the wave wheel and cause serious local wear.

The amount of laundry per wash should not be excessively less than the rated capacity, otherwise the light load will increase the turning and friction of the laundry and increase wear.