Why does it take 15 turns to enter the system when booting windows?

Updated on technology 2024-02-08
28 answers
  1. Anonymous users2024-02-05

    The first is that there is a problem with the system you installed, and the second is that your hardware is somewhat incompatible or has too many devices, such as 2 hard disks, 2 optical drives, or any 1394 cards, such hardware devices, so it boots slowly.

  2. Anonymous users2024-02-04

    There is too much garbage in the system, clean it up, or reinstall the system, and you can solve it.

  3. Anonymous users2024-02-03

    On your first machine, change the registry to remove all the startup items you don't need.

    Specifically, to get started, run regedit and open the registry.

    Hover over to the top level, and then Ctrl+F is the first tick of the search command Find Run, which is exactly the same as the following keyword. Then look for them one by one, find one and delete all the startup projects on the right, so that all the run and all startup projects are deleted, and your computer will start the block.

  4. Anonymous users2024-02-02

    It's not a big deal, the performance of the motherboard and the motherboard is sometimes different, if you still feel uneasy, you can reinstall the system, I hope it can help you, and if you have any questions, you can get me.

  5. Anonymous users2024-02-01

    Or is it a system issue The loading project has something unpleasant.

  6. Anonymous users2024-01-31

    Please install all the hardware drivers and try again!!

  7. Anonymous users2024-01-30

    When you have time, back up the data and reinstall the system.

  8. Anonymous users2024-01-29

    360 optimization should be much better as long as you have a fast internet connection, and there is a c disk to organize and delete some unwanted ones will be very effective.

    None of the above will allow you to reinstall the system.

  9. Anonymous users2024-01-28

    It should be a problem with memory and hard disk It may be due to the interference of viruses or Trojans It is recommended to carry out anti-virus If it doesn't work, go to the computer store to reinstall the system and delete the useless I used to do the same with the computer to reinstall the system It will be faster But the effect is not great It is best to replace the hard disk or memory If you don't want to change it, you can change a graphics card It's not expensive to about 100 That is, the system is broken I used to turn off the power switch directly and the result can't be turned on It is recommended to repair it.

  10. Anonymous users2024-01-27

    Set it with Super Bunny or Optimizer:

    1.Cancel the program preview function.

    2.Increase the CPU cache.

    3.Optimize your system.

    4.Clean up registry junk.

    5.Clean up system junk.

  11. Anonymous users2024-01-26

    There is a lot of software, especially rogue and junk software.

  12. Anonymous users2024-01-25

    The software is restarted so it will be slow.

  13. Anonymous users2024-01-24

    What network,,Telecom,Netcom...

  14. Anonymous users2024-01-23

    That's not a problem. If the landlord doesn't like it, then reinstall the system. This will solve the problem. Microsoft's stuff just has a lot of problems, and there's no way to do it.

  15. Anonymous users2024-01-22

    It's normal, most computers do.

  16. Anonymous users2024-01-21

    It's normal for some computers to load graphics card settings.

  17. Anonymous users2024-01-20

    The memory is loose, remove it, and then use an eraser to clean the gold finger, and after inserting it back, it's almost there.

  18. Anonymous users2024-01-19

    There is a problem with the boot file. First use the win pe disk to enter the system to set the system disk as an activity,Does it have an effect after restarting?,If not,Fix it with the system disk,If it's invalid,Just reinstall the system.。

  19. Anonymous users2024-01-18

    This situation is caused by a problem with the system, and reinstalling the system can solve the problem.

    1. First of all, you need a ghost version of the system disk.

    2. Press the F2 button to select Start from CD when you boot up.

    3. Select Enter PE System in the Disc option.

    4. After entering the system, use the one-click restore tool in the PE system to restore the system image in the disc to the C drive.

    5. After the restoration ends, start the computer from the new, the system will automatically install the drivers and applications, and the computer will automatically restart and enter the system when everything is ready.

    6. The installation is complete.

  20. Anonymous users2024-01-17

    There are two possibilities, first, there may be a problem with the hardware, resulting in the verification failing, but this possibility is relatively small, because if it is a hardware problem, the XP progress bar will go a lot when entering the system, I don't know how many times the landlord's XP progress bar has gone? Second, system problems, may be caused by the conflict caused by your installation of some software, or it may be system file corruption, or it may be poisoned, which may be all of these, but the possibility of system file corruption is relatively large. It is recommended that the landlord look at the XP progress bar when entering the system a few times, if it is normal under 3-6, more than this may be a hardware problem, or reinstall the system after exclusion!

  21. Anonymous users2024-01-16

    What version of Windows?If it's XP, it's not normal.

    It may be caused by the installation of anti-virus software or some other program that needs to be started before the system starts.

    Note: Optimize the system startup item (enter msconfig in Runtime).

  22. Anonymous users2024-01-15

    How many years has the hard drive been used, listen to if there is a particularly loud sound.

  23. Anonymous users2024-01-14

    It should be the result of "optimization".

    The system should be loaded, after all, it is to be loaded, the optimization software only knows one and does not know the other, through the means to shorten the time of the scrollbar, but the necessary components of the system still need to be loaded, because it is not loaded in the first time, so the startup time becomes slower.

    For the operating system, do you think Microsoft understands it better or 360 understands it better? If even 360 can do something well, why can't Microsoft do it well?

  24. Anonymous users2024-01-13

    There's a problem with one of your computer's hardware, or it's in poor contact. The system self-test delay caused by it will be done according to the method on the second floor, and it can be solved in many cases.

  25. Anonymous users2024-01-12

    There is a black screen, the graphics card driver may be installed in a problem, and there are too many startup items, you can use 360 to turn it off.

  26. Anonymous users2024-01-11

    Learn to look at the process of the system.

    Check out the **.

  27. Anonymous users2024-01-10

    Shut down, plug and unplug the graphics card, memory, hard disk and other hardware, graphics card memory, etc., wipe the gold finger, and try again.

  28. Anonymous users2024-01-09

    This is the cause of the virus in the computer, it is recommended to redo the system, some viruses can not be killed with software!

Related questions
30 answers2024-02-08

The first question is quite normal. There are still a lot of things that need to be loaded after the scrollbar, including the graphics card driver or something, depending on the size of the driver and other reasons, of course, the signal needs to be stopped for a while. >>>More

10 answers2024-02-08

It's the wrong way you pretended. Yes, how to install ACD2006: >>>More

32 answers2024-02-08

This is normal, ADSL will send a request to the server after booting up, the server will first confirm its legitimacy, and then assign you an IP address after verification. This period of time is relatively long.

9 answers2024-02-08

Floppy disk error. CMOS Checksum Error - Loading default settings. >>>More

15 answers2024-02-08

Select cd*** for the boot item.

2.Reinstall the system. >>>More