Hello, I would like to ask you if the W705 WIFI has found your own signal?

Mine is the same Later, I found out that the original route needs a fixed channel to search My company's router sets up automatic channels There is also Chinese SSID is not supported, and I see garbled characters If you don't understand, you can ask me.

WiFi settings: The premise of wifi access is that there is wifi hotspot coverage, otherwise "network not found" will be displayed after opening the wifi connection.

Menu - > phone settings - > tab card) Connectivity - > wifi - > open (phone automatic search) - select the appropriate wifi connection - > left soft key option - > settings - > name ssid: don't worry - > display name: fill in your favorite (it doesn't matter if you don't fill in) - automatic connection:

Close (open is a direct connection as soon as there is a favorite network signal) - security settings: fill in the password, open do not need to fill in - > network sharing: off - > IP (if the router's DHCP is turned on, that is, the automatic allocation is turned on, do not need to fill in, if the router specifies the IP, fill in the specified IP, generally the same network segment) - gateway:

Fill in the router address (mine is the subnet mask: > dns (it seems that you don't need to fill it in, but I filled it in at first, I can't go online, and then I changed it to this telecom DNS, it's OK) - save (it seems that there is no save to say, return directly) - return to the zodiac menu - > the Internet - > the Internet.

It may have something to do with your upgrade, restore the factory to see if it can be used, if not, you can brush the system of the machine, and change the version.

Restore the factory settings first, and then flash the machine if it doesn't work, and then if it doesn't work, the hardware is damaged, so you can only ask customer service, I hope it's not a matter of hardware (this is the easiest, but also the most effective way).

It is also possible that there is a hardware failure, (such as: has the mobile phone dropped the wifi antenna has not been damaged...) That's all I can say. If you really can't do it, go to customer service for consultation.

No way, it's broken, it's broken, W705's wifi is soldered to the motherboard, don't get your hopes up, the people who call you to spend money outside are lying to you, ask why, hehe, I'm a victim.

This is because you upgraded the firmware, and you have no choice but to flash the phone.

I'm also using the system I used to brush the exotic style of the dragon pig.,It's pretty stable and there's no problem.,Now it's very stable to brush plus9.,The root cause of your signal difference is estimated to be the baseband You can try to brush the baseband.,The official system that comes with it must be able to brush You have to believe the official.,You can brush the ROM of the National Bank XT702,

This is also the case for me, I bought a portable wireless AP router. It is possible to buy more than 100 points on **. It's called Tenda W150M. It's easy....

WiFi signal amplification is to change a high-power route?。。。

Restore factory settings,If it doesn't work,Just go flash it.,The phone version doesn't work.。

Hey, make do with it.

Think about cell phone signals, broadcast signals, satellite signals, smart city signals, digital TV signals, computer radiation, television radiation, ......

Just pay proper attention to it, if you are too worried, you can only live in the mountains, upstairs is correct, in fact, make sure that the mobile phone is used in a place with a good signal.

WiFi is a mobile phone using its own system with its own wireless router to connect to the wireless network, has nothing to do with the mobile signal, its own sending and receiving radiation is negligible.

The Wi-Fi signal is very weak, do you think it is harmful for you to use your mobile phone every day? Then, Wi-Fide is not worth mentioning, basically the same as the PHS signal, basically no harm...

There is no harm, if you really want to think like this, it is also harmful for people to live on this earth now.

Let's put it this way, WiFi is actually WLAN. Starbucks, McDonald's, these places have emission sources for customers to access the Internet for free. Is it harmful?

I'm in the same situation as you, and I'm going to tell you.

Reset the router to factory settings and set it up again.

Maybe your wireless router has turned off the [SSID Broadcast] function.

1. Check whether the wireless function of the wireless router is turned on.

4. Find a mobile phone to see if you can find the signal of your wireless network.

iPhone.

Step 1: Tap your phone "Settings" - "WiFi".

Step 2: Click on the signal of the wireless router in the list of wifi searched on the mobile phone, as shown below

Step 3: Click "Ignore this network" on your phone and then reconnect to this signal and enter the passwordStep 4: Ignore and then re-search for the signal of the wireless router, enter the password, as shown below

Android phones. Open the "Settings" - "Wi-Fi" of your phone, tap the name of the Tengda wireless signal, and select "Forget this network" or "Forget this network". Re-enter the wireless password to connect.

If it still doesn't work, open the browser on the computer and enter the ** bar to enter the routing settings interface. On the home page, click "Please click Advanced Settings for other Internet access type settings", click Wireless Settings - Wireless Basic Settings - Main SSID (Wireless Signal Name) to clear, and change to other numbers or letters to click OK. After tapping Wireless Security (Wireless Encryption), clear the password, set a new password of 8 digits or more, and click OK.

Connect your phone to a new name with a new password to see if you can connect.

How to set the SSID hiding method of the wireless network:

2.Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface.

3.Go to the wireless settings interface and check Hide SSID or Turn off Broadcast (SSID).

The router settings hide the SSID, which is useful under XP, Vista and Windows 7 are useless, and the wireless can be searched, but you need to enter the SSID name to connect.

As long as your SSID is set to personality points, others can't guess it, and you can't connect to the Internet!

Also, it's a good idea to set up Mac filtering again.

Just add a password to the wifi.

Others generally can't connect.

If you want something that no one else can receive.

It can be found in the route settings.

Turned off the SSID broadcast.

But then you don't seem to be able to receive it yourself.

Thank you for your adoption.

Disable the SSID broadcast function. Your WiFi ID is gone, but it doesn't affect the Internet access on devices you've already connected.

Turn off the SSID broadcast, and others won't be able to search for it.

When you search by yourself, click Add Network, enter your network SSID (wireless network name), encryption method, password, and will automatically connect after saving.

Explain it directly with the Tengda router I use, enter, enter the settings interface, and turn off the SSID directly!

Enter the router settings interface, click Advanced Settings, Wireless Settings, remove the "SSID Broadcast" option in front of , and click Save Settings. Get.

It seems that today's routers all have a feature to hide the SSID. Tenda Dlink TP is fine. But I really think it's easier to set up Tenda.

Turn it off, or set a password.

You're going to have to go online and find a software to connect to. My friend also has an N80 that can also use wifi

I think there is a very strange thing, I set the laptop as a hotspot, and then my mobile phone and a friend's mobile phone can receive the wifi signal, but, the other two Samsung can't receive it, I don't know if it's the same problem, try other wifi signals, such as McDonald's and other places should have it, I know if it can't be received in the mainland.

This is not This you can try the method I use 5800 to search wifi: set connection function bearer mode access point (increase access point) automatically search for available access points? Select Yes and you will find all the wifi in the vicinity as long as there is a signal.

If so, then it depends on whether the wireless of the mobile phone is turned on, or there is a problem with the wireless network card of your mobile phone. This can only go to after-sales maintenance.