-
Wireless routers.
Always disconnect yourself for the reason:
Cause 1: The network line is faulty.
Home Network Environment Cabling]:
1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.
2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.
Cause 2: The router has an incorrect Internet setting and you need to reconfigure the router.
Solution: Reset the router and set dialing again.
Reset Router Method:
Method: There is a button [RESET] button on the back of the router, press and hold for 5 seconds, and the indicator light on the router panel will be off and then on, which means that the setting has been reset.
Set up router dialing:
The IP and DNS settings of the computer are automatically obtained.
1. Open the browser - enter the general router address is this or check the login information on the back of the router) Routing - enter the user name.
Password, (the default is admin).
2. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter your Internet username and password according to the prompts, and save.
3. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.
Reason 3: Router hardware is damaged.
Workaround: Replace the router with a new one.
-
1. The cat or router is unstable, and it will be like this if the time burns for a long time, you can give both the cat and the router a break.
2. The reason for excluding cats and routers is that the network itself is unstable, but this situation is only accidental, not every day.
Hope mine can help you! Have a great day!
-
Check whether there is a problem with the network cable or if it is in poor contact.
-
The possibility of virus infection and unstable signal will lead to network instability, and the specific reasons and solutions are as follows:
1. ARP virus.
Phenomenon: If most of the computers in the wireless LAN have intermittent network drops, that is, you can access the Internet for a while, but a pure infiltration will be disconnected again, after restarting the computer or router, you can access the Internet normally, but this problem will occur again. In this case, it is most likely that the computer in the LAN is infected with the ARP virus and the connection is dropped.
2. The wireless signal is unstable.
Phenomenon: If the distance between the computer and the wireless router is too far, or there are too many obstacles between the two, the wireless signal received by the computer will be very weak, and the connection will be dropped and the network will be disconnected. When the computer is very close to the wireless router, there will be no network drops.
Solution: 1. Put the computer close to the wireless router to use it. 2. Add a wireless router and connect it with the previous wireless router to connect WDS bridge.
3. There are too many wireless terminals.
Phenomenon: One or several computers are disconnected, and the computers that are disconnected are not fixed, one may be A and B these days the computer is off the network, and after a while, it may be C and D. This situation is generally due to the large number of wireless terminals (laptops, tablets, mobile phones) connected to the wireless router, and the wireless router cannot support so many wireless terminals to access the Internet at the same time.
Solution: (1) Set a password for the wireless network and select WPA2 encryption mode to restrict the wireless terminal from using the wireless network without the permission of the hall.
3) If you have to ensure that so many wireless terminals access the Internet at the same time, you can replace a better enterprise-level wireless router, or add a wireless broadband router, and establish a WDS bridge relationship with the previous wireless router.
-
The wireless network is always intermittent, not because of the router's problem, but because the Wi-Fi has a small coverage, if the mobile phone is far away, it will not be able to search for the wifi device, which will lead to intermittent wireless network;
Since wireless network frequency bands do not require any telecommunications operator license worldwide, WLAN wireless devices provide a wireless air interface that can be used worldwide at an extremely low cost and with extremely high data bandwidth. Users can quickly browse the web in the Wi-Fi coverage area and make calls anytime, anywhere**.
-
1. Poor driver compatibility of the router: If the driver compatibility is too poor, then network disconnections will occur frequently. Normally, after the router has been used for a period of time, the phenomenon of network disconnection will become more and more intense.
The main reason for the network disconnection is that the wireless network card driver function of the computer system is too poor, or the version is too low.
2. Network poisoning: The computer in the LAN is infected with viruses, and a large number of viruses quickly replicate and spread data, resulting in the exhaustion of router resources and then crashing. This situation can only be solved by antivirus software, and the router does not currently have the function of checking and killing viruses.
3. The router is overloaded: The amount of the router is too large, which exceeds the processing capacity of the router and causes the router to crash. Computers in the LAN are transmitting large amounts of data, such as P2P software such as Kuaicast, which can slow down the network speed in a short period of time, exhaust router resources, and cause the computer to be disconnected.
In this case, you can set QoS in the JCG router, and the IP rate limit and connection limit can be used to solve the problem of disconnection caused by P2P software.
4. There are too many obstacles to the use of wireless routers.
5. The most common reason for the router to be disconnected is that the wireless signal is unstable due to excessive signal attenuation. Since the wireless router uses the wireless microwave frequency band, the biggest feature of microwave is that it propagates in a nearly straight line and has a very weak diffraction ability, so the obstruction on each propagation line will attenuate the wireless signal.
6. Wireless signal co-channel interference: Now there are a large number of devices in life that are also in the same frequency band as the router, such as microwave ovens, wireless**, Bluetooth mobile phones, wireless mice, wireless speakers, etc., which will cause same-frequency interference to the wireless router.
-
When you are playing a game and having fun, but the network is disconnected all of a sudden, are you extremely angry? In fact, this is mainly the troubles caused by the router being disconnected. SoThe router is always disconnectedWhat is the reason?
What should I do if my router is disconnected? Let's take a look!
1. What is the reason why the router is always disconnected?
1. Poor driver compatibility.
If the driver compatibility is too poor, then it is normal for people to disconnect from the network. Because usually, after the router is used for a period of time, the phenomenon of network disconnection will become more and more intense. In fact, the main reason for the network disconnection is that the wireless network card driver function of the computer system is too poor, or the version is too low.
2. Viruses are at work.
Needless to say, if there are some viruses in your computer, it will also cause the network to drop frequently. Because the software on the browser is varied, but many small owners do not have any understanding of its basic information when installing these software, so it will lead to some software with viruses.
3. There is a deviation in the setting.
If you can be sure that your network is not due to software viruses, you can see if the software parameters in your broadband router are too low. Because under normal circumstances, the software parameters of the broadband router are too low, which will also cause the network at home to be disconnected.
Part 2: What should I do if the router is disconnected?
The router is always disconnected1. First of all, you must find the reason why your home network keeps dropping. If your router parameters are too low, you can enter the browser, enter, and enter this interface. As for the password, you can find it in the manuals of the router.
2. Then, I don't know if you have noticed that the network will be slower during the cooking time at noon or at night. The main reason is that there are more households that use electrical appliances during this time, so it will lead to network instability. In other words, it's actually the voltage that is the cause.
At this point, you can restart the router at home and see if the problem can be solved.
3. Finally, if the above two methods cannot solve your problem, then you can find a professional maintenance master and ask him to help you find the reason for the network disconnection. Or consult some professionals and ask them to provide you with some solutions.
What is the reason, and what to do if the router is disconnected, I hope to give you some help. In fact, everyone wants their home network to be extremely smooth, but you must first find out the cause of the slow network speed of the router, and then find the appropriate solution!
-
1. Heat dissipation problems, the hardware performance of the router cannot meet the demand.
2. If not, it is the problem of the router itself, the router has a restart switch, it is a small button mode, if your router is in an environment with heavy dust and fumes, it is possible that the small key switch is in a glued state due to moisture, in this case, the router will definitely restart indefinitely.
There is no doubt that the problem should be approached in this way: >>>More
Changed the IP address of the LAN port of your wireless router to 251-253. Then turn off the DHCP of the wireless router. Directly connect the network cable pulled from the line to the LAN port to access the Internet View the original post
Quite simply, because the router is also a Layer 3 device of the OSI, the IP address you receive is managed by the wireless router rather than the route in the background of the organization that can provide you with Internet access, so you cannot access the Internet. Therefore, the simple point is to turn off the DHCP function of the wireless router, and connect the LAN interface of the wireless router to the incoming wire. This is actually downgrading a wireless router to a wireless switch, but as long as it can be used.
Hello, it must be that your router has not been set up successfully, your broadband login has not been successful, and there is your computer room desktop, and you can also use portable wifi. Receive signals from your wireless route. Recently, one of the more popular ones on the Internet Tencent National WiFi feels more suitable for you to use. >>>More
Before configuring a wireless router, you must connect your PC to the wireless router with a network cable, and the other end of the network cable must be connected to the LAN port of the wireless router. After the physical connection is installed, in order to configure the wireless router, you must also know two parameters, one is the username and password of the wireless router; Another parameter is the management IP of the wireless router. Generally, the default management IP of wireless routers is or other), and the username and password are admin. >>>More