How to install a restore software? How to restore the software on which the installation package is

Search the internet for a goust

1. Install one-click ghost;

Unzip Open Press the prompt to click Next three times Cancel the toolbar (if you don't want it) Next Install Wait for success Press the prompt point to back up automatically.

To re-backup, choose one of the methods, and do it when the system is in good condition.

1. Back up after booting (simple).

Click Start Program One-click Ghost One-click Ghost Select One-click Backup Backup Auto Restart and wait for a few minutes to complete the backup.

2. Back up at startup.

Immediately when the computer is turned on, the non-stop click button Wait for a few seconds, Chinese One key ghost brightens Immediately click Enter Wait for a few more Chinese options to appear, click Brighten the backup Click Enter to start the backup.

If there are only two options (restore) and (cancel), then press and hold the esc key at the same time to enter the main option: Point ( Turn on the one-click backup Enter, start backup, wait for about 3 minutes.

Restoration method; You choose one or the other.

1. One-click ghost to restore when starting, (suitable for system crash and crash).

Immediately when the machine is turned on, it is clicked. Wait a few seconds to see the one-click ghost....Brighten up and click enter immediately Wait for a few Chinese options to appear, click the key to restore or restore brightened with one key Click enter and wait for 2-10 minutes to restore the finish.

2. Restore after booting (relatively simple and safe).

Click Start Program One-click Ghost One-click Ghost Restore or Restore Auto Restart and wait for a few minutes to complete the restoration. (If you see the recovery not bright arrow after restarting, brighten it and press Enter).

Some "one-click restore" versions, after installation, boot there are selection menus "operating system", "one-click restore", then you can press the key to select to enter the "one-click restore".

If you have already entered the system, find "One-click Restore" in "Start All Programs", and double-click to run!

2.Start the backup.

After running "One-click Restore", select "Backup System" or "Restore System", and follow the prompts to back up or restore!

Some versions default to the backup location in the last partition, while others need to manually select the backup location or folder. In any case, don't put backups on the system partition!

3.When is the backup available?

After installing the system, it runs normally and can be backed up;

After installing the system, all the apps are installed and running normally; that is, you can back up;

After the system is installed, all applications are running normally, and all settings are in the best state;

When you think you need a backup!

4.Processing of backup files.

When you back up multiple times, there will be multiple backup files, and the backup files are all in several GB, which will occupy a lot of disk space and need to be handled reasonably.

Some versions of "one-click restore", the backup will overwrite the previous backup file by default, that is, the latest backup file will always be retained in the end; Some versions of "one-click restore", the backup will generate a backup file at a time, then you can delete the original backup file and only keep the most complete backup file! Of course, it is also possible to keep more than one (if the disk space is sufficient), it is recommended to keep two:

The most original backup file after installing the system, mainly system files; A backup file with all apps running fine and all settings in the best condition!

Summary. How to restore the software on which the installation package is installed

Please wait patiently for 3 minutes, we are sorting out, and we will answer you immediately, and please do not end the consultation.

After the phone installation package is deleted, it can be restored by recent deletion. Taking the mobile phone Huawei P40 as an example, the steps to recover the deleted installation package are divided into 3 steps, and the specific operation is as follows: In the mobile phone file management interface, click Slow Detection Recently Deleted.

On the Recently Deleted page, press and hold the installation package that you want to restore.

In the options, click Restore.

The destroyer p> must have been the ghost of the canopy's system restoration program. The Windows operating system's "System Restore" program is a very annoying thing. From time to time, it creates a "restore point", which occupies the size of the hard drive depending on the current situation.

After a period of time, when the Restore Points fill up the rated space, it clears the oldest Restore Points to make room for new Restore Points. So it will always revert to the previous restore point, and it will be automatically restored. It is annoying to say that it is boring because using the system restore program to restore the system, it cannot be completely restored, and it is easy to produce some system errors, so it is better not to use it.

The solution to the above problem is to close the system restore program for all partitions except the system disk, or "click" (shut down) it entirely. If you keep the system disk restore program, be sure to set it to take up a moderate amount of hard drive space in the "My Computer" attribute.

This article is based on.

Computer Knowledge Network.

Original source.

We can use the system disc or the U Depth U disk boot disk maker to make a U disk boot disk and reinstall the system.

1: After the system restore, the software previously installed on the D drive needs to be reinstalled (some software can be used without reinstallation, but sometimes it is easy to make mistakes.) Some software must be reinstalled before it can be used).

2: Why reinstall? Because although your software is installed on the D drive, the running programs are actually still on the C drive, and the system is restored, so there is no startup program for those programs installed in the D drive (unless you have them in the system backup).

3: If you continue to install, you can delete the previous installation folder directly, or you can directly install it in the previous folder.

Restore is all about restoring your backups. You're going to restore it first.

File backup. Up, what you back up, restore into what, that is, after you install the system, use.

One-click ghost

Back up the C with the system, and don't care about it in the future.

C disk. What's in it, what's deleted, you now just use Restore, and the C drive will return to the state you were back in. If you haven't backed it up before, you can't talk about a restoration.

System Restore. There are many ways to do this, and most of them use one-click ghsot software.

Restore the system. One-click ghost restore, all files and viruses in the current C partition are removed, and the original backup is at the same time.

File recovery. C disk, make.

The system is running normally.

Because. One-click restore.

Only partition C is backed up, and only C can be restored, and the other partitions will not be affected.

One-click hard disk version. (Olympic version) or, with winrar

Unzip the compression tool software, and in the interface that opens, select "File", that is, automatically install the one-click restore to the D drive.

2. Back up the C drive.

Start -- Programs -- One-Click Ghost, turn on "One-Click Ghost".

dialog box - click ".

One-click backup. C drive" -- select "Backup", automatically reboot to enter the system backup progress interface (don't manually specify anything in the middle), in.

Back up your system. In the interface, the backup progress is displayed, and it will automatically restart after completion, and there is a hidden C drive backup folder stored in the last partition disk of the first hard disk of my computer.

3. Restore the backup.

Power on, start -- Programs -- One key ghost, turn on "One key ghost".

dialog box - click ".

One-click recovery. C"-"Recovery"-The following do not need to move anything, it will be carried out automatically, in the recovery system interface, the recovery progress will be displayed, and it will be automatically restarted after completion, and all the data in the current C drive will be cleared, and the files that were originally backed up by the C drive will be restored to the C drive.

If the system is paralyzed and cannot enter the system, press the keyboard F8 to enter the system when it is turned on.

Safe mode. - Select Normal Boot - Enter - Enter - Enter "Please select the operating system you want to boot" - Use the arrow keys to select "Win

XP "Bottom" one-click ghost....Options - select "One-click Recovery") - Click "Recover" - OK.

It shouldn't be counted.,You haven't installed the restoration software should not have it.,Commonly used restoration software has ghost and the freezing point of the Internet café, etc.,Generally, the ghost system at home collapses without reinstalling.,Just restore it.,The kind of Internet café is to prevent people from destroying it.,Restart it once and restore it once。

Use one-click GHOST to back up C disk, you don't need to install the system when there is a system failure and can't be restored, first use one-click GHOST to restore the system, so that the files stored in your C drive and the ** program software will not be lost (the files and program software during the backup, if you add new files later, you can re-backup the C disk).

There are two ways to restore one-click ghost, you can enter the system or you can enter safe mode (press F8 when you boot up), click the desktop icon or start all programs, click on one-click ghost, open the software, click Restore C drive, and click Restore below. If you can't enter the system and security mode, there is a one-click ghost option at startup, there is a waiting time of 5 seconds for a slow sensitive, press the confirmation key, and you can restore the system with one click on the ghost (the backup is to open the software and click on the file which macro to backup the C disk, click on the backup below).

Here's what comes with the system.

Use the system that comes with the system restore method:

The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press the book step, you will see the date page has a dark date, that is the restore point, after you select, click the next restore (win7 restore system, in the control panel then the device and security sub-option and then the backup and restore sub-option).