Ask a question about the number of frames F .

frame = frame, which means a still picture. In D2, 25 frames = 1 second.

Almost all the time in Darkness is calculated in F.

The speed affects your attack speed, because**may have IAS, your equipment and skills may have IAS, and the number of frames of the entire attack speed is determined by these factors, and it cannot be simply said that the attack speed is a few F, and the attack speed is different for each** each character.

For the cyclone, the acceleration other than ** does not work, the most critical thing is the base speed and the speed increase.

The calculation of the attack speed of the whirlwind involves the mechanism of the two-handed rotation movement, which is more complicated, and it is generally good to remember the conclusion.

20% Faster Hit Recovery = 20% Faster Hit Recovery, which has nothing to do with attack speed, but allows you to return to a non-hitstun state faster after you are hit in a hitstun state.

20% rapid re-attack is an early translation error.,It's actually a 20% quick strike reply.,The blow reply is the time when you stiffen after being beaten.,It has nothing to do with attack speed.,The real attribute of increasing attack speed is translated into adding accuracy.,For example, the attribute of rune 13.,It's to add 20% attack speed.,The result is translated into 20% accuracy.,The real attribute of accuracy.,There are two words "extra" in front.。

f refers to the number of frames.,One second = 25 frames,For example, the maximum rapid speed of the whirlwind is 4f,That is, 4 frames to hit an attack.,And then you can use division to know how many times you can hit in a second.,As for how to know how many frames your attack speed is.,It's a bit troublesome to calculate.,I'm not very good at math.。。 I think it's a direct look at the number of basic speed and acceleration attributes (referred to as IAS) of **.,According to the experience summed up by the predecessors to match the equipment.,Generally, you can reach the highest attack speed.。。。

Driver issues? Check your graphics driver's drive to keep it up to date.

I turn on 3 times buffer.

The world is open in detail.

These are all framed.

The effect is off.

What a vista pulls spell details or something.

Minimal handle. Much better.

Remember to turn off the sound.

The map shows **,It's normal for the frame rate to be high.,As for the number of frames with two different numbers.,It's strange.,Is it in a scene?,TBC map and CTM map display effect is very different.。

Dude,You drive your other number to the main city to see,You know,If there are a lot of people, your frame rate will definitely be low,You run no one's map,The frame rate must be high,Also,The frame rate is also related to the map terrain,There are some places on individual maps that will be very stuck,If you click on the map, you won't be able to see the player,The load on the graphics card is low,The frame rate will rise,Once you can see the player,She must be moving,Then your graphics card must have a load,More will be stuck。

fraps, open it and run the game, and then press f12 a few times to see if the frame rate can be displayed.

17I haven't played yet, but I'm going to play it, do you have high requirements for the computer?

There is an option to display the number of frames, just tick it.

It is recommended that you use N2O Game Master, which is very easy to use and a must-have for those who play games, mainly depending on the number of frames of the game and check the health of the CPU and graphics card, so that you can have a clearer understanding of what needs to be optimized on your machine.

If it doesn't work, it's definitely a problem with the power supply!

Your current computer configuration is related to the motherboard and CPU. Your graphics card is good too, inside.

The memory is also 2G, and the CPU and motherboard are left.

What's your CPU? However, your motherboard is a GIGABYTE P965, so presumably your CPU won't be too high. Right now.

The motherboards all support five-core, and it's really time for your motherboard to change.

Just switch to an ASUS P5Q and a dual-core one.

Hardware issues, right?

You go buy a computer and look at it.

Try setting your graphics card to low performance mode. That's why it's set. No other questions.

Buying a junk graphics card will improve a lot without being too advanced, because your graphics card and your setup are not on the same level.

In the CF display settings, change the D3D or OpenL mode to try, whichever is better.

I've been playing CF for a while.,Finally, I have a more in-depth study of FPS.,The level of FPS is mainly determined by the level of the CPU main frequency.。 70 percent of the graphics card, 30 percent of the graphics card

Let's compare it to 16 people in the game. Because the FPS is not low when there are less than 10 people.

My notebook T2390 ( Dual-core 2G memory x3100 integrated graphics card When playing CF 16 people, the average FPS is 20-30

I desktop P4 single core ( 1G memory gf6200 256M graphics card play cf16 people fps 15-30

After that, I changed to a 9600GT graphics card, and the fps was still only 30Obviously, it has little to do with the graphics card.

Roommate 1's machine AMD3200+ (single-core) 1G RAM 7300GT FPS 50-70 for 16 people

Roommate 2 AMD8450 (3 cores) 8600GT 2G memory 16 people FPS 100-140 (cool).

Roommate No. 3's machine Pentium dual-core 2180 8600GT 2G RAM FPS 50-70 for 16 people

Generally speaking, I feel that AMD is more suitable for playing CF, there are many ways to improve FPS on the Internet, I can say very responsibly, unless there is a real problem with your computer system, if not, I have tried those methods, and I haven't encountered any work, so if you want to improve FPS, change the CPU and graphics card.

The fps can be stable to more than 30, in fact, you can play smoothly. But the crosshairs of the gun should recover more slowly, the recoil is larger, but the low fps really practice the technique, I played CF for a short time, only more than 1 month, and then play on the FPS30 notebook every day, practicing AK, and bird sniper. Occasionally, he was first in the blast, with a best score of 27 dead and 13

Recently, I went to an Internet café to play, and the FPS of the Internet café was more than 100, and I finally broke out. Because of the grinding of FPS30. On a 100fps machine, the AK recoil is ignored outright.

Blasting Pingjue more than 20 people each. Occasionally not the first, the best score is 55 dead 14Playing sniper warfare with a bird sniper only headshot, never been the first, 16 people remained in the top 5, and the best result was 2nd

Kill 47 dead 20 burst 40 heads

The consequences of a headshot, I don't have the heart to play CF on my own computer, which invisibly increases the Internet fee.

My CF equipment: XL-747 double-flying mouse + Hellfire mat (students have no money and can't afford to buy Viper).

Membership + Body Armor + Orion.

There is no problem with the hardware of your machine, the problem is compatibility with the game, tx is very rubbish, the game is not optimized, and the optimization tasks are handed over to the player's machine, so there is a compatibility problem.

Sometimes the dual-core is not as high as the single-core FPS, the CPU is fine, you can change the graphics card, go to the place where the graphics card is sold and get one back to try, if it is not improved, you can go back and not waste money.

Shandong District 1 Lao Gao.

Written to friends who are worried about FPS.

1. Driving this thing doesn't mean that the newer the better. It depends on whether it is suitable for the machine.

2. Is the game a stand-alone game or an online game? If it's an online game, it may be related to game optimization.

3. It may be related to computer heat dissipation. That's the case with my computer, there is a problem with the fan of the machine, and it will not actively accelerate the heat dissipation. You can go to the next fan control software.

4. Last resort, reinstall the system.

It may be a series of mistakes that have just been replaced by a bad system, and you can just replace it back.

The game also needs to be set to 32-bit and 64-bit.

There is no need to test the number of frames of the camera, 25 frames for N system, 30 frames for P system, this is a standard regulation, and there can be no deviation.

You say the other way around, the n system is 30 frames, and the p system is 25 frames.