What are the sequelae of the computer after switching on and off many times?

Poisoned, let's kill the virus. It's best to install an antivirus and turn on real-time monitoring, so that the chance of poisoning is smaller.

If antivirus does not solve the problem, it is recommended to simply reinstall the system.

I'm damned,Upstairs,You're here to cheat the points.,The landlord's problem is obviously caused by the destruction of the system's files.,The system problem is solved by reinstalling it.,Of course, fix the hard disk bad sector before installing the system.。 If you can't install the following software under the system.

Kill the Trojan. 70AM-TH1DZ1-PL-C05-S22AFR-94U-E7Z0 Registration Code.

Haha, you're in luck!

After researching that it's a memory problem, you can rip out the memory! Try the golden finger of the memory! Then plug it back in and you're good to go!

If it doesn't work, just change the slot!

Good luck!! ^

Remember to give me the portion, hehe

It is recommended to kill the virus first, and reinstall the system if it doesn't work, I used to restart the damaged system because of the voltage instability, and reinstalled it several times.

Reinstall the OS, it's fine, it shouldn't be a hardware issue.

There's a virus in the machine. It is recommended to check for poisoning.

The computer should not be switched on and off frequently, and the interval between switching on and off should be at least 3 minutes each time. Try not to shut down or restart frequently unless there are special circumstances.

First of all, frequent switching has the greatest impact on the CRT display, because the display is discharged by the high-voltage package inside when it is started, up to more than 100,000 volts. Therefore, if it is switched on and off frequently, it is extremely unfavorable to the picture tube of the display, and the service life will be greatly shortened. In addition, voltage impulses that frequently pulse in a short period of time may damage the integrated circuits on the computer; Secondly, the most damaged is the hard disk, the current hard disk is a high-speed hard disk, from cutting off the power supply to the platter completely stop rotating, it takes a long time.

If the platter does not stop, it will be restarted, which is equivalent to re-accelerating the hard disk in a decelerated state.

There is some truth to the Windows default screen saver and hard drive power down times of 15 minutes and 30 minutes. It is recommended not to turn off the computer if you leave for less than 20 minutes.

It is best to use standby for a short period of time, the recovery time is fast, and it is best to turn it off for a long time.

Displays the properties --- power"Let the computer automatically standby after a certain amount of time is idle, which saves power and trouble.

When the computer is in the "sleeping" state, it will automatically reduce the running speed of the machine, so as to achieve the effect of power saving. According to statistics, the computer saves 80%-90% of electricity in standby state than in normal use.

P.S. Correct way to turn on and off:

The correct way to turn on the computer is to turn on the power of the monitor and then turn on the case, and the way to turn off the computer is to quit all running programs before shutting down (otherwise the file data will be lost), then click "Turn off the computer" in the "Start" menu, and finally turn off the power of the monitor.

Normal switching on and off has little impact on the computer, and the computer does not expect it to be used for 8 or 10 years, and it is no problem to switch on and off several times a day.

No matter what kind of electrical appliances, frequent switching is harmful, the electrical appliances will be affected by large current at the moment of start-up, repeated switching on and off is very harmful to electrical appliances, and computers are no exception, especially to hard disks.

If it's a newly bought notebook, the first boot may be a frequent restart, if it's not the first boot, it's a problem, and it's very likely to cause a virus or system crash! After turning on the phone, enter the safe mode to check and kill and see how it goes.

As a result, the voltage is unstable, and the motherboard may burn out due to frequent power failures and power-ons.

The voltage of the computer is the most unstable when it is turned on and off, and the damage to the computer is greater.

There will be damage to the system and hard disk. Try not to switch on and off so often. Thank you.

Hehe, we all know that the general notebook system has been inferior to the desktop, and it will heat up if it works for a long time, so it is recommended that you shut down the computer after you use it, and if it is a normal shutdown, the machine should not be damaged, and the way to maintain the laptop battery is to minimize the number of times the battery is used This method feels a little stingy, but it is also the most effective. You must know that the number of charging and discharging of the battery is directly related to the lifespan, and each time it is charged, the battery is one step forward towards retirement. It is recommended that you use an external power supply as much as possible, and the battery should be removed when using an external power supply.

Some friends are convenient, often plugging and unplugging the power supply multiple times a day, and the laptop is equipped with a battery, which will cause more damage to the battery. Because every time an external power supply is connected, it is equivalent to charging the battery once, and the battery will naturally die.

Laptop battery maintenance method - 3, recharge after the power is exhausted and avoid charging for too long Whether your laptop uses lithium battery or nickel-metal hydride battery, be sure to recharge it after the power is exhausted (the power is less than 1), which is the best way to avoid the memory effect. Regarding the statement that lithium battery has no memory effect, I have already explained that it is an irresponsible misguidance of the merchant. Lithium battery also has a memory effect, but its memory effect is smaller than that of nickel-metal hydride.

The same charging method as the mobile phone battery, when you charge the laptop battery, try to avoid too long time, generally within 12 hours. As for the precautions such as preventing exposure, preventing moisture, preventing chemical liquids, and avoiding contact between battery contacts and metal objects, I will not mention them here.

From the perspective of green environmental protection, it is better to turn it off. Laptop batteries are lithium batteries, don't wait until they run out of power to recharge, don't charge them deeply, use them normally, and don't need to do special maintenance.

Generally speaking, it is best not to pull out the power supply when using it, because the current batteries are lithium batteries, there is no memory effect, it doesn't matter if it is turned off, and it is charged if it is not turned on for a long time! As for how many times you shut down, it doesn't matter at all, as long as yours shut down correctly!

Two or three times is normal, of course turn off at night, you can directly use the power adapter when you are at home, and the battery can also be down, but the battery is also good on it, especially when the voltage is unstable.

No, just take care of it. It's also normal for the computer to heat up, forget to adopt...

1. Frequent switching on and off is detrimental to the life of the computer, and it is the hard disk and monitor that suffer the most. When the hard disk does not work out, the reading and writing head is next to the disk surface, and the buoyancy generated by the high-speed operation after booting makes the head float above the platter to work, and the reading and writing head returns to its original position after shutting down. When the display is working normally, its current is relatively stable, and when switching on and off, due to the sudden increase and decrease of the current to cause a certain impact on the display, frequent switching on and off is naturally unfavorable to it.

2. The standby function allows you to return to the original working state without restarting the computer. Standby mode can turn off monitors, hard disks, fans and other devices, so that the whole system is in a low energy consumption state, desktop standby power consumption is 15-17W, portable 7-10W. When you reuse your computer, just press any key, and it will quickly exit standby mode and return to exactly the working state it was in before standby.

If you don't need the computer for a short period of time, you can set the computer to standby mode, which can reduce the impact of the current on the whole machine due to frequent power on and off, and the instantaneous start-up. 3. The hibernation function refers to saving the data currently in the running state in the hard disk, and the power supply of the whole machine will be completely stopped. Because the data is stored on the hard drive, which is much slower than the memory, it is relatively slow to go to sleep and wake up, and the computer can be completely disconnected from power while sleeping.

Therefore, it is recommended to use this feature when we do not use the computer for a long time, and it can also allow users to turn on or off the computer much faster.

Yes, frequent computer switching on and off is easy to cause the computer screen to flicker. And the runners in the main chassis will also be corrupted. So it's best not to switch on and off frequently.

The interval between each computer should be more than 15 seconds, because the voltage impulse of frequent pulses in a short period of time may damage the integrated circuit on the computer; Secondly, the most damaged is the hard disk, the current hard disk is a high-speed hard disk, from cutting off the power supply to the platter completely stop rotating, it takes a certain amount of time, if the platter does not stop, it will be restarted, it is equivalent to letting the hard disk in a deceleration state accelerate again.

If the interval is appropriate, the relatively frequent power on and off will not hinder the computer much. Because the life of a computer monitor is the display time, the hard disk must ensure that there is no power failure and vibration during the reading and writing process, and the motherboard and other hardware are afraid of static electricity and moisture.

If you even take this kind of damage into account, you just don't use the computer.

This kind of thing is insignificant. It won't cause damage because of your shutdown and boot up several times.

Pressing the power on and off many times in a short period of time is harmful to the hardware, electronic components have its service life, to take the simplest example, switch, the life is about tens of thousands of times. Assuming a day switch 10 times, then it can be used for more than 10 years, for the computer, the number of hard disk reads and writes, the components on the motherboard, will also have its service life, if it is used normally, the life should be more than 10 years, this life has been far out of the update cycle of computer technology, that is to say, the technology has been eliminated, your computer has not been broken.

Of course, special environments, such as switching on and off dozens or even hundreds of times a day, for several months in a row, will still have an impact on the service life of the computer.

Of course, the power on and off I am talking about here refers to the normal power off operation, if you often use a rough method such as forced power off to shut down the operation, although the impact on the hardware is not great, but it is indeed a fatal blow to the data in the computer.

In general, the normal switch on and off has little impact on it, but it is rare that there is no major deal if the switch is turned on and off frequently for a day.

Multiple frequent boots have a lot of impact on all hardware! Don't you feel awkward to use it like this? You can describe what prompts appear when you start in the Know section, so that everyone can help you think of a way! It doesn't cost you anything! Problems with the switch buttons. Go.

Some effects, but generally not fatal, depending on the lifespan of your hardware.

Hehe, the easiest, turn on the key to get a problem early.

It doesn't matter, but if it doesn't turn on often. It can break the computer. The internal parts are not running and are heating up and breaking.

But don't be like the machines in the Internet café, which are turned on 24 hours a day.