How to adjust the date and day of the week on the watch At which time? Always not allowed, Casio s

Pull out the watch handle in half, counterclockwise is to adjust the calendar, and then pull out half to adjust the time.

Don't pick a time after 7 p.m. It is recommended from 8 am to 7 pm.

1. Date adjustment: press the adjust button, the display will display the word ADJ after about three seconds, enter the mode of adjusting the digital display, press the mode button to rotate the set items in turn, when the project flashes can be changed, according to the flashing content, set the time and date of the digital display. After the adjustment is complete, press the adjust button to exit the setup mode.

2. Set the second hand: press and hold the adjust button until the word "00" is displayed, the display will flash to display the word "00", then it is to adjust the second hand, use the light key and the search key to adjust the second hand to 12 o'clock. The search button rotates the pointer clockwise, while the light button rotates the pointer counterclockwise.

3. Set the minute hand and hour hand: When the second hand is adjusted, press the mode button to enter the setting interface of the minute hand and hour hand. The search button rotates the pointer clockwise, and the light button rotates the hand counterclockwise, aligning both the minute and hour hands to 12 o'clock.

4. After the adjustment is completed, press the adjust button to exit the setting mode. After that, the hands of the watch begin to rotate rapidly, turning to the time displayed in the digital dial. Then the date and time are adjusted.

Here's how to adjust the day and date on your watch:

1. Pull it out of one gear on the screw of the watch.

2. On the premise of only pulling out a gear, twisting up or down is to adjust the week, if you can't screw or have no effect, you may need to use the time function to adjust the week, the simplest is to rotate a circle is a day, and so on.

3. In some individual cases, it is necessary to rotate in the opposite direction, if the front rotation is not to adjust the week, then the reverse rotation may be the week.

Precautions: Press the button not too hard to avoid failure; The LCD panel needs to be replaced with a new one after five to seven years of use; If the battery is out of power, it should be removed in time to avoid the liquid corroding the movement.

If you find that the light is not on, the button is out of order, or there is a sudden large error in timing, it should be repaired in time, which may be due to poor contact or detachment of the component solder joint. Although some have the word "waterproof" printed on the instruction manual or back cover, try to avoid contact with water.

1. Find the crown, which is generally on the right side of the watch;

2. Pull out the crown 2 pieces to adjust the time mode, let the watch hand stop, and adjust the time to 6 o'clock;

3. The upper right button of the watch is to adjust the week, and the subdial display at 9 o'clock in the dial;

4. The lower right button of the watch is to adjust the month, and the subdial display at 3 o'clock in the dial;

5. Do not adjust the time watch function during the time period from 23:00 to 5:00 in the morning, so as not to damage the mechanism;

6. Dial clockwise, do not dial counterclockwise, if you wear it with your left hand, adjust it with your right hand, and turn it forward is clockwise.

7. Then push the crown back to become a date adjustment mode;

8. When adjusting, the date should be adjusted to the day before; Then pull out the second section of the crown again, enter the adjustment time mode, and adjust the time clockwise;

9. In the process of rotating the hand to re-point to 6 o'clock, if the date jumps, it proves that the adjustment is in the morning of Beijing time;

10. To adjust the watch in the afternoon, you need to rotate clockwise again and adjust it to the current time after one week to make the correct date and day of the week display normally;

11. Push the crown back after adjustment.

Regardless of any watch, the adjustment should follow such a rule, the procedure is as follows: first pull the watch handle out of a gear, counterclockwise rotation to transfer the day of the week (remember, the day of the week should be adjusted to the day before the current week), then rotate the watch clockwise to adjust the date (the date is also adjusted to the day before the current date), and then pull out the second gear handle, adjust the time, clockwise rotation to the date and the day of the week to become the date of the day, if you are adjusting the watch in the morning, then just continue to adjust the watch to the current time, If you are adjusting the meter in the afternoon, you need to keep the hour hand rotating for 12 hours and then adjust it to the current time. 2. Be sure to avoid adjusting the watch from 9 o'clock in the evening to 2 o'clock in the morning, this time is called the date blind spot, if the watch is adjusted at this time, it is easy to cause the deformation of the date gear of the watch (this is not much to say why), resulting in the delay of the date beating time.

1. The watch handle pulls out the first gear to adjust the day and date, and pulls out the second gear to adjust the time. Pull out a gear first and prepare to adjust the day and date; 2. Adjust the day and date respectively for the upspin and downspin. If today is Sunday, March 4, you can change the day of the week and date to yesterday's 3rd Saturday respectively. 3. Then pull the watch handle out to the second gear and adjust the time.

Turn the watch handle one or two times until you can see that when the watch hand reaches about 12 o'clock, the day and date jump to Sunday and the 4th respectively at the same time, which means that the watch time enters 1-12 o'clock in the morning; 4. According to the usual practice of adjusting the time of the watch, after turning the watch hand around, the watch time enters 1-12 o'clock in the afternoon, and then you adjust it to the correct time now. And that's it. After more than 90 minutes, the watch will automatically skip to Monday the 5th; Note:

Do not adjust the time from 9 a.m. to 5 p.m., because the date change mechanism of the watch from 9 p.m. to 5 a.m. has been engaged, and the adjustment time will break the date change gear. This period of time is commonly known as the red line area, in addition, when the watch with a date adjusts the time, try to move forward and not backward, which is also a protective gear.

1. Pull out the watch in the first gear to adjust the day and date, and pull out the second gear to adjust the time. Pull out a gear first and prepare to adjust the day and date;

2. Adjust the day and date respectively for the upspin and downspin. If today is Sunday, March 4, you can change the day of the week and the date to yesterday's 3rd Saturday respectively.

3. Then pull the watch handle out to the second gear and adjust the time. Turn the watch handle one or two times until you can see the watch hand to about 12 o'clock, and the day and date jump to Sunday and 4 respectively at the same time, which means that the watch time enters 1-12 o'clock in the morning;

4. According to the usual practice of adjusting the time of the watch, after turning the watch hand around, the watch time enters 1-12 o'clock in the afternoon, and then you adjust it to the correct time now. And that's it. After more than 90 minutes, the watch will automatically skip to Monday the 5th;

The su on the watch refers to Sunday, mo refers to Monday, tu refers to Tuesday, we refers to Wednesday, th refers to Thursday, fr refers to Friday, and SA refers to Saturday.

The full name of SU is Sunday; The full name of Mo is Monday, the full name of Tu is Tuesday, the full name of WE is Wednesday, the full name of TH is Tursday, the full name of FR is Friday, and the full name of SA is Saturday.