What is the working principle of the Saeo air energy water heater?

The working principle of air energy water heater is the same, Kelin air energy water heater principle:

Its internal structure is mainly composed of four core components: compressor, condenser, expansion valve, and evaporator.

The working process is as follows: the compressor compresses the refluxed low-pressure refrigerant into high-temperature and high-pressure gas discharge, the high-temperature and high-pressure refrigerant gas flows through the copper pipe wound around the outside of the water tank, the heat is conducted into the water tank through the copper pipe, and the cooled refrigerant becomes liquid under the continuous action of pressure, and enters the evaporator after the expansion valve, because the pressure of the evaporator decreases suddenly, so the liquid refrigerant quickly evaporates into a gaseous state and absorbs a large amount of heat. At the same time, under the action of the fan, a large amount of air flows through the outer surface of the evaporator, and the energy in the air is absorbed by the evaporator, and the air temperature decreases rapidly, turning into cold air release.

The refrigerant, which has absorbed a certain amount of energy, then flows back to the compressor and enters the next cycle.

From the above working principle, it can be seen that the working principle of air energy water heater is similar to the principle of air conditioning, and the reverse Carnot principle is applied, which absorbs a large amount of low-temperature heat energy in the air, and becomes high-temperature heat energy through compression by the compressor, which is transmitted to the water tank and heats up the water. The whole process is a process of energy transfer (from air to water), not a process of energy conversion, without heating hot water by electric heating elements, or burning combustible gas to heat hot water.

It's the same principle as an air conditioner.

1. All in operation, the evaporator absorbs heat from the ambient heat energy of the air, compresses it into a high-temperature and high-pressure gas by the compressor, and when it is condensed into a liquid through the condenser, the heat released is transferred to the water in the water tank. The water temperature rises, and the condensed liquid throttles back to the evaporator through the expansion valve, and then absorbs the heat from the air, and so on.

Air energy water heaters, also known as "air source heat pump water heaters". The "air energy water heater" absorbs the low-temperature heat in the air, vaporizes the fluorine medium, and then heats up and pressurizes through the compressor compression, and then converts the water into water for heating through the heat exchanger, and the compressed high-temperature heat energy is used to heat the water temperature.

As the name suggests, the heat in the air is transported to the water through the refrigerant, the traditional electric water heater and gas water heater obtain heat energy by consuming gas and electric energy, while the air energy water heater is to achieve the purpose of heating water by absorbing the heat in the air, and can absorb about three times the heat energy to heat the water in the case of consuming the same electric energy.

It uses the principle of refrigeration to absorb heat from the air to produce hot water. The process of the main smart model is to let the working fluid continuously evaporate and absorb the heat in the environment, and then compress, condense (release heat), throttle, and re-evaporate, so as to transfer the pre-heat preparation slow amount in the environment to water.