-
Anonymous users2024-02-06Hello! This WMM is an IP Internet protocol, and many devices cannot be connected to the Internet.
If you're looking for easy WiFi management, I know there's a portable WiFi that's perfect for you.
You can also view the list of devices connected to the wifi to prevent others from using the wifi to secretly surf the Internet.
It is also easy to listen to, and you can go to the Internet to see the introduction of this portable wifi.
Hope mine is helpful to you Hope thank you.
-
Anonymous users2024-02-05I don't know, I just gave it to you, and I don't understand.
The concept and usefulness of the function.
WMM itself is a sub-protocol of the wireless transmission protocol, and if it is enabled, it requires that the hardware (mobile phone, notebook, etc.) linked to the router also needs to be supported before the link can be successfully linked.
And the general hardware, I've tried it anyway, doesn't support this sub-protocol, so you need to turn off wmm to link successfully.
-
Anonymous users2024-02-04The concept and usefulness of the WMM function: WMM itself is a sub-protocol of the wireless transmission protocol, and if it is enabled, the hardware (mobile phone, notebook, etc.) linked to the router also needs to be supported to be successfully linked. And the general hardware, I've tried it anyway, doesn't support this sub-protocol, so you need to turn off wmm to link successfully.
-
Anonymous users2024-02-03Fainting is not a WMM problem at all, and after the router is bought home, you have to set up the router according to the instructions before the router can work normally.
-
Anonymous users2024-02-02WMM (Wireless Multi**) is a subset of the standard. WMM allows wireless communication to define a priority range based on the type of data. Time-sensitive data such as audio data will have a higher priority than normal data.
In order for the WMM feature to work, the wireless client must also support WMM. Customers can choose yes or no according to their needs.
Wireless router settings in detail: Wireless Advanced Settings.
1. Log in to the router first.
2. Then click [Advanced Settings].
3. The first is the running state, where you can disconnect the router and view the ** gateway, etc.
4. Then there is [Internet Settings], where you can see the username and password, etc.
5. Click [MAC address cloning], which is generally cloned automatically.
6. Then click on [WAN Rate Control], which depends on the network speed.
7. Click on [LAN port settings], and here you can see the IP address and subnet mask.
9. Check the DHCP server.
10. Open the [DHCP Client List], here is to see how many people are connected to the router.
The role of the router.
One of the functions of the router is to connect different networks, and the other is to choose the route to which the information is transmitted. Choosing a smooth and fast shortcut can greatly improve the communication speed, reduce the communication load of the network system, save the network system resources, and improve the smooth rate of the network system, so that the network system can play a greater role. From the point of view of filtering network traffic, routers function very similarly to switches and bridges. >>>More
Quite simply, because the router is also a Layer 3 device of the OSI, the IP address you receive is managed by the wireless router rather than the route in the background of the organization that can provide you with Internet access, so you cannot access the Internet. Therefore, the simple point is to turn off the DHCP function of the wireless router, and connect the LAN interface of the wireless router to the incoming wire. This is actually downgrading a wireless router to a wireless switch, but as long as it can be used.
The "Guest Network" will set a separate SSID, and users can choose not to set a password for easy use when friends and family come to visit. In addition, users can limit the speed of the "guest network" to provide wireless network connection without affecting the smooth operation of their network. In addition, the "guest network" does not access the user's intranet, and only provides external network connections. >>>More
Before configuring a wireless router, you must connect your PC to the wireless router with a network cable, and the other end of the network cable must be connected to the LAN port of the wireless router. After the physical connection is installed, in order to configure the wireless router, you must also know two parameters, one is the username and password of the wireless router; Another parameter is the management IP of the wireless router. Generally, the default management IP of wireless routers is or other), and the username and password are admin. >>>More
The main thing is to look at the transmit power; Generally, the power of high-power wireless routers is more than 500 milliwatts; Looking at the size of the antenna, the power of the antenna is generally 2dbi and 5dbi, and if it were me, it would be from these two points. Hehe! You can take a look at it in Zhongguancun like this, there is currently a JHR-N835R wireless router that feels good, you can take a look.