Nokia 6303C can t access the Internet because of factory reset, what to do

GPRS (WAP) Internet Settings? Menu Tools Settings Connection Settings - Access Point - Options Add Access Point Use Default Settings Connection Name: CMWAP (can be taken at will) Data bearer mode:

Packet Data Access Point Name: CMWAP Username: None Prompted for Password:

No Password: None Authentication: Security Home:

http://wa

Menu Tools Settings Connection Settings - Access Points - Options New Access Points Use Default Settings Connection Name cmnet (can be taken arbitrarily) Data bearer: grouped data Access point: cmnet Username:

None Prompted for Password: No Password: None Authentication:

Normal Home:

Options Advanced Settings: Network Type: IPv4 Mobile IP:

Automatic Domain Name: Automatic **: None **Port:

None(0) Unicom: Connection Name: Interactive Vision (GPRS); Data Bearing Mode:

grouped data; Access point name: uniwap; Username: Blank; Prompt for password entry:

Not; Password: Leave it in; Identification: Common; Home:

http://wa

To factory reset your Nokia 6300, you can follow these steps:

Open your phone's menu interface and select"Settings"Options.

Once you're on the settings page, go in"Settings"options"Security settings"。

Select in the security settings"Restore factory recall settings", and you will be asked to enter the security code of your phone phone.

Once you have entered the correct security code, a prompt will appear prompting you if you want to do a factory reset"OK"Can.

The phone will automatically restart when you are sure and restart after a factory reset.

It should be noted that a factory reset will erase all personal data and settings on your phone, including contacts, text messages, slipchains, etc. So, take a good backup of your important data before doing a factory reset. Also, a factory reset can fix some software issues, but it won't fix hardware failures or damage.

If your phone has a hardware failure, you need to seek professional repair services.

The square and counting method to restore the Nokia 6300 factory settings is as follows:

1.Turn on your phone and enter the main interface.

2.Select'Settings', find it, and open it'Factory reset'。

3.Enter your phone passcode, or if you don't have a passcode set, enter the default passcode (12345).

4.Confirm the factory reset and the phone will restart automatically.

5.After the phone restarts, it will return to its factory state, and all data and settings will be erased, including contacts, text messages, **, etc.

It is worth noting that before the factory reset, you should save all the important data in the phone, and confirm whether you need to back up some important data for later use.

Hello, your phone can't get online, and the reasons may be as follows:

First of all, make sure that your phone is not down due to arrears. ）

1. The SIM card is loose due to a drop or strong mechanical vibration. In this case, the phone will not be able to access the Internet.

Solution: Turn off the phone, remove the battery, reinstall the SIM card, and then turn it on again, and the phone can go online.

2. You may have cancelled your data traffic service in the last few days. For example, you have sent a message to a mobile company such as "cancel data traffic for 5 yuan" and "qxsjll5"."and so on. The mobile company has canceled the Internet access function on your mobile phone (canceled the GPRS service).

Solution: Call the manual service at 10086 (call 10010 from Unicom) and ask him to help you re-open the GPRS service.

If you have tried both of the above aspects and still can't work, then it may be that your phone is broken and there is a problem.

You need to go to your mobile company to reset your Internet license !!

First: the mobile phone has not opened GPRS monthly subscription**, so you can't connect to the network, it is recommended to call 10086 to press 0 manual service, let the customer service help you recommend, you choose a suitable one**!

Second: the mobile phone has opened GPRS, but it still can't access the Internet, do you see if the mobile phone has been stopped in arrears within 24 hours?If the phone is stopped, pay the phone bill, and then restart the phone, and you're good to go!

Third: There is a phone bill, there is a monthly subscription**, and you still can't access the Internet, that is the wrong choice of access point!

Open the function table -- Network -- left click "Options" -- Settings -- Standard -- Access Point -- User Defined (1. Mobile MMS, the access point for mobile phones to receive MMS; 2. Monternet, CMWAP network on mobile phones, is the mobile phone network on mobile phones, the advantage is to save traffic, and the disadvantage is that the speed is slow and crazy; 3. GPRS is connected to the Internet, and the CMNET network on the mobile phone is the computer network on the mobile phone, the advantage is that the Internet speed is fast, and the disadvantage is that the traffic is charged, and I generally use this access point).

There are several reasons why this could be the case:

First: Your mobile phone is shut down due to arrears, resulting in no network and no Internet access.

Second: Have you recently sent a text message to 10086 or 10010 about GPRS services such as "cancel data traffic by 5 yuan"? This situation will also cause the mobile phone to be unable to access the Internet due to the cancellation of the GPRS service.

Third: Recently, when you are playing with your phone, have you entered the "settings" in your phone? Has the access point in your phone been unintentionally deleted or changed?

Solution: You can call 10086 (Unicom dial 10010) customer service** manual service, ask why your mobile phone can't access the Internet, and they will find a way to help you solve it.

Factory reset is OK Remember to back up ** and so on to the card