TP Link TL WR340G Wireless Router Setup

I'm not familiar with this router.,There's a QoS function.,If you have,You can limit the network speed.,It's a question of whether it's okay.。

If one of the two computers is not under your control and often consumes bandwidth, such as watching movies or **, then you need to limit the network speed. If both are yours, there's no need to throttle your internet speed.

=xfoxe route + cat dial-up Internet access universal answer ==

- Wired connection ---

1.Connect the modem to the (wireless) router WAN port via a network cable.

2.Connect your computer to the (wireless) router LAN port via a network cable.

3.The computer is connected to the LAN port of the (wireless) router.

4.Open the web browser, enter the specific IP of the router), the default is admin admin or others.

5.After logging in, find the WAN settings, select PPPoE, dynamic PPPoE, fill in the "PPPoe user name" given to you by the telecom service provider, fill in the password given to you by the telecom service provider in the "PPPoe user password", and the others can be left blank, click the "Confirm" or "Execute", "Save" and other buttons to make it take effect.

- Connect --- wirelessly

1.Connect the modem to the (wireless) router WAN port via a network cable.

3.Open the web browser, enter the specific IP of the router), the default is admin admin or others.

5.After logging in, find the WAN settings, select PPPoE, dynamic PPPoE, fill in the "PPPoe user name" given to you by the telecom service provider, fill in the password given to you by the telecom service provider in the "PPPoe user password", and the others can be left blank, click the "Confirm" or "Execute", "Save" and other buttons to make it take effect.

In the above two ways, it is best to add security review to block unauthorized users for wireless routers.

1.Wireless access password.

When connecting to a wireless network, you need to enter a password to verify.

2.Come through MAC filtering.

When you connect to the network, you cannot access the NIC if the address (MAC) is not in the authorization list.

TP router WR340G+ password change rotten setting method:

Set a router password].

1. Open the browser, enter the general router address in the address bar or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

2. Click: System Tools Login Password Modify --- Save.

Set a wireless wifi password].

1. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the routing audit leak) into the route - enter the username and password (the default is generally admin).

2. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].

Authentication Type: Automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

Or enter TP

Then the default account and password is admin

Then go to the wireless parameters and you can see the encrypted stuff! There is a picture, you look at the bar hall and the people are dressed in the forest! I'm taking a screenshot of my own TP! It should be the same as yours! If you don't understand, just hi I'm disgusted!

1. The network cable that comes out of the cat is connected to the wireless router WAN port (some are called Internet), and the wireless router LAN port is wired to the desktop, and the notebook is only used wirelessly.

2. Change the local connection IP of the notebook and desktop to automatically obtain and enter the default address of the router or.

Specifically, there is a logo on the back of the router), the name of the user's cavity and the password of Wu Yun: admin After entering, there is a network configuration wizard inside, just follow the prompts step by step.

3 In wireless, there is an encryption, just use WPA or WPA2, be careful not to WEP others will not be able to rub the network.