Can casual roller skates be converted into flat roller skates?

No, flat shoes are either hard shell or hard leather (relatively soft uppers), but casual shoes are completely soft uppers, and can only do the simplest actions such as front and back cuts, and other actions can not be supported by the feet, are not forced, and are easy to be injured.

Also, there are too many differences between flat shoes and casual shoes, not just changing two wheels, changing to banana wheels. They have different bearings, tool holders, and wheel hardness. Do not use the casual that flat flowers.

300 flat shoes I remember there are Xiongfeng A3, Student No. 1, these shoes are unreliable. The quality is not guaranteed. If you want to play, it is recommended to buy entry shoes Whirlwind No. 2 Strengthened, SKT300, SKT1000+, all of which are around 500.

If you want to play forever, it is recommended to buy SEBA Black & Red Gold (no longer in production) and SEBA-H. Although this shoe is heavy, it can best exercise people, it can be said that every master has experienced this pair of shoes, ** and then 1000-1400, depending on how you bought it.

That's clear??? If you still have questions, you can send me a message to communicate.

It can be changed, but it is just a practice of flat flowers. One or four rounds are replaced by small ones, and it is best to buy flat flower shoes for professionals.

Yes, but it's not worth it, more than 300 flat flower shoes are novice shoes, about 1000 in the middle end, and the best one made in China seems to be the KSJ of the meter high. 2600, and,Casual shoes,The quality is really unreliable.,It's estimated that it's broken if you do a few actions.,Or buy flat flower shoes.,- I can't tell you for a while.。。

3--400 is the basic shoe! Casual shoes can not be changed into flat flowers.

Summary. Yes, fancy skates can be made by changing the wheels so that all four wheels touch the ground. Here's how to change the wheels:

First, remove the wheels of the roller skates, then replace them with larger wheels so that they can touch the ground, and finally install the wheels back in place, making sure the wheels are securely mounted. When replacing the wheels, pay attention to the size of the wheels, as well as the installation position of the wheels, so as not to affect the use of roller skates. In addition, when replacing the wheels, you should also pay attention to the material of the wheels to ensure the durability and safety of the wheels.

Yes, fancy skates can be made by changing the wheels so that all four wheels are bothered to touch the ground. The way to replace the wheels is: first, remove the wheels of the roller skates, then replace the larger wheels so that they can touch the ground, and finally install the wheels back in place to make sure the wheels are installed securely.

When replacing the wheels, pay attention to the size of the wheels and the installation position of the wheels, so as not to affect the effect of roller skates. In addition, when replacing the wheels, you should also pay attention to the material of the wheels to ensure the durability and safety of the wheels.

Can you elaborate on that a little bit more?

Yes, fancy skates can be made by changing the wheels so that all four wheels touch the ground. The wheels of fancy skates are generally replaceable, and you can change different wheels according to your needs, and pick up the wide sail to achieve the effect of letting all four wheels touch the ground. When replacing the wheels, pay attention to the size of the wheels, as well as the quality of the wheels, so as not to affect the effect of roller skating spring hail.

In addition, the wheels of fancy skates can also be replaced according to different ground conditions, such as in the indoor ground, softer wheels can be replaced to reduce friction and improve the effect of roller skating; Outside, stiffer wheels can be replaced to improve grip and better control the direction of the roller skate. In conclusion, fancy skates can be changed so that all four wheels touch the ground, but pay attention to the size and quality of the wheels, as well as change the wheels according to different ground conditions to achieve the best roller skating effect.

Roller skates are so strange to novices, how to deal with the replacement of wheels is an indispensable skill in the future, so how to correctly know the size of your wheels and replace the wheels and install bearings? If you do it wrong, it will cause unnecessary trouble! The following is a detailed introduction!

Method steps.

72mm, 76mm, 80mm, generally 39 yards as the demarcation point: 39 yards and below is 72mm 76mm, 39 yards and above is 76mm 80mm, of course, there are flat wheels are the same size wheels: so I leave it to you to distinguish the method:

After selecting the wheel, the next thing is to change the wheel, find the nail hole as shown in the figure: and use the included roller wrench, plug in such as the nail, must be completely inserted, otherwise it is easy to slip, and at the same time due to the long time to play may be tighter, at this time the most important thing is the direction of the force, be sure to unscrew the nail, do not screw hard, so it is easy to cause the tool to bend or break directly in, remember!

The next thing is to unload the bearing, use the roller wrench head to hold the bearing steel ring of the flying saucer position between the two bearings, remember that it is the steel ring, directly use two hands to force, or use the lever principle to knock it out, this depends on personal habits, as long as the bearing is not damaged!

The most annoying thing may be the installation of the bearing, many times especially the flint wheel, the bearing is installed tighter, not easy to install in, then I will share a good method with you: put the bearing in the center hole of the wheel to align, and then put the wheel slide wrench flat on the bearing, a little hard to smash the wrench handle, so that the bearing can not be hurt at all, if your bearing can be directly pressed into it by hand, there is no need to use this method!

The next thing is to install the wheel: the same method, the wrench must be aligned with the nail, and completely inserted to avoid slippery, more importantly, do not tighten too tightly, when the screwing is almost, roll the wheel by hand to see if the rotation is smooth, the wheel is generally printed outward, the middle is large, and the two sides are small!

Precautions. 1.When unloading the wheel, remember not to slip the wire, and be sure to put the wrench completely into the nail, otherwise buy the wire extractor.

2.Any new thing has to have a new process, after installation, remember to do big moves if you don't adapt, such as braking, jumping, etc., and cherish it!

As upstairs said......Rookie or save some money to buy a cheap practice technique, assembly or something is not suitable for you, you will choose HV shoes to show that you really don't know about roller skates....HV shoes are notoriously abusive feet, who do you choose, you choose him?

If you assemble it, forget it. How to say it, because of roller skates. Unlike computer pulling.

It's not that the assembly is better than the original. **1000, I don't think I need it, because the landlord said he was a novice. If you are a novice, even if you buy you 10,000 shoes for your novice, it will be a cannon to shoot flies, hehe!

I think it's okay for the landlord to buy more than 500 shoes, because it's too extravagant to say 1000, hehe, my personal thoughts are different, and I can't help it if the landlord buys 1000, because I don't think it's necessary, get 1000 shoes, and it's the same if you get 500, and it's not like you're going to a big roller race.

Roller skates are divided into upper shoes and knife holders and wheels.

When connecting all parts, a 6-corner screwdriver is used for installation. When installing, pay attention to the knife holder must be installed flat, otherwise it is easy to have a "partial edge" situation in the process of gliding. It can damage the ankle.

Double-row roller skates generally cannot be changed to fancy skates.

Pattern roller skates are generally four-wheeled single rows, and their shells wrap around the feet very well, which is not something that ordinary smooth shoes can change.

Instead of taking the risk to change it, it is better to buy a professional pattern shoe, which is only a matter of a few hundred yuan.

Roller skates.

1.Number the wheels first and mark them.

2.When changing wheels, it is recommended that you swap the No. 1 wheel on your left foot with the No. 3 wheel on your right foot, and it is best to rotate (reverse) the inside and outside of the wheel. According to this rule, the wheel of the left foot is swapped with the wheel of the right foot, then the wheel of the left foot is swapped with the wheel of the right foot is interchanged, and finally, the wheel of the left foot and the wheel of the right foot are interchanged.

In particular, it is important to note that the action of changing the wheel only needs to be done once a month to a month. Bright and noisy.

Adjustment of the wheel height.

Some models of wheel shoes, when the wheels are installed on the base, a part called an adjustment pad is needed, and we can adjust the height of the wheel touching the yard according to the needs of various sports.

Cleaning of bearings.

If the bearing is contaminated with dust, it can be cleaned with a dry cloth or toothbrush. If you want it to turn more smoothly, you can use a special maintenance oil.

Replacement of bearings.

Remove the bearing with a three-pronged screwdriver and wipe it with a dry cloth, please note! When putting the bearing back on, do not lock the screws too tightly.

Then put the two hex wrenches into the screw holes and reverse the screws out counterclockwise.

Then put the two hex wrenches into the screw holes and reverse the screws out counterclockwise.

Finally, take out the wheels, replace them with new wheels, and screw them on!