I want to change the items that are randomly opened when the computer is turned on, where can I do i

Click Start - Run Enter msconfig OK Click "Start" to remove all the items you don't want to run automatically on boot up" and then click "OK" and start your computer again.

**Optimization master is the most trouble-free, and 360 can also be done in manual clicks"Get started"Run Enter after entering msconfig and click Enter"Launch"Only keep"ctfmon Antivirus Firewall,"All other front checks have been removed. Then click"Applications"Press"Are you sure.

After booting up, enter msconfig in the runtime, and press enter. Open the interface, click on the startup item, and change it yourself. You can also do it with software such as 360 Security Guard, Master Lu and other software.

QQ software management is also OK, Ruixing Kaka is OK, and even Jinshan cleaning experts are OK! The choice is yours!

Software such as 360 can be managed, or you can type msconfig in the runtime and set it in the startup item.

The 1st floor is correct, don't listen to other people's 360. If you don't get it right, you'll cry...

In this life, I resolutely don't use 360...

1.In the Start Menu attachment.

2.Or right-click Start - Properties - Start Menu - Customize - Check the Run Command at the bottom - After you are OK, you will have it in the Start Menu.

No, you don't have to find a program to enter English.

I think you just need to install anti-virus software on your computer, such as 360, with a 360 security guard in it, find advanced tools, and then disable startup items.

Start running.

Enter msconfig

It contains all the items of the PC Startup Items.

Cancel the ones that don't need to be started and restart the computer.

Click to start Run Enter msconfig Select the startup column Cancel the items you don't need.,Tick the ones you need.,Generally leave anti-virus software and input methods on the line.,Just three or four on the line.。。。 Or use 360 Security Guard, organize the startup items...

Install a 360 security guard, in the "Advanced Tools", set the "Boot Startup Item Management", and disable the items that you don't want to start when you don't want to boot up.

If you don't want to install the software, enter "msconfig" in "Start" - "Run", and remove the tick in front of the item you don't want to start in the "Start" leaflet.

With 360, there are advanced tools in it, and there are boot startup items in it

And you see that the QQ live settings are OK to start and cancel the startup.。。。

Click Start - Run - msconfig - Start and tick it in it!

360-Advanced Tools-Boot Startup Item Management is more convenient.

Open 360 Software Manager - Boot Acceleration - Here the programs that do not need to be started randomly are prohibited, reduce the boot startup items, and only leave the antivirus software and input method.

To start --- run--- enter msconfig--- start--- select the project you want!

Start --- run--- hit msconfig--- start--- you can remove the items you don't want here, restart or log out and it will take effect, hehe.

Start >> >> msconfig >>>> >> >> >> >> >> >> >> >> >> &

Start--run--msconfig, and then you can choose to turn on Super Rabbit in the startup item, and as the friend said, you can choose to boot up and start automatically in the Super Rabbit interface.

Open the Super Rabbit software to set it up and set it to run automatically at boot tick.

Just add or remove it from the boot item of 360 or Kingsoft Poison.

The landlord doesn't need 360?,360 Advanced Tools--Boot Acceleration--Boot Startup Item,Just set it up.。。

Please start by stating what your system is.

Generally speaking, setting a password is to set a login password in the user in the control panel, and if the other party is not very powerful, it will not be able to decipher.

If it is a boot password, please pay attention.

There are two places to set passwords in CMOS. One is the premium user password and the other is the general user password.

The computer considers the CMOS settings to be highly confidential to prevent others from changing them, and the authority of the advanced password is higher than the user's password on the CMOS setting.

To put it simply, if both passwords are set, then you can use the advanced password to enter the working state, and you can also enter the CMOS settings, while the user password can only enter the work, and you can also enter the CMOS to modify the user's own password, but other than that, you can not make other settings on the CMOS. If you only set a password, whoever you have has both permissions.

Move the cursor to the password setting, press Enter, enter the password, press Enter, the computer prompts you to re-enter the password to confirm, enter and then press Enter; If you want to cancel the password you have set, you can press enter directly when prompted to enter the password, and the computer prompts you to cancel the password, please press any key, and the password will be canceled after pressing the key.

Take special care to remember once you have set your password. If you set a password for your computer and forget it, you won't be able to use your computer to work, which will delay things.

If you really forget the password, you can't start the computer, for the master, disassemble the computer host and then carry out CMOS discharge, you can let the computer forget the password, but this needs to find someone who is very familiar with the computer hardware and refer to the motherboard manual to do it, and CMOS forgets all the set values at the same time, and must be reset to all settings. It's best to keep your password in mind!

The advanced password is the content of the Supervison password in CMOS.

The general user password is the user password

I want to set a password.

Once you're on your desktop, click on the Control Panel inside the Start menu.

Find out the user account icon. Double-click. Now the next user is the general premium username is:

administrator: The guest username is guest, and there is also a username that you filled in yourself when you installed the system; Set a password for whatever username you want.

Tap the user icon. Then there is the function to change the password. If you choose, you can change the password as you like.

The focus is on which username you changed your password to earlier. Don't forget your password. Otherwise. There will be trouble again ... Be careful. You can do it.. 88

My computer --- control panel --- user account --- computer administrator password protection – follow the above and you're good to go.

When booting up, press the left and right buttons of del to select password, enter the password to save, and then restart to see, don't forget the password!

Click delete when the device is turned on

Go into the BIOS and set it up yourself.

360 Guardian - Functions - Boot acceleration, so that you can set it up.

Click Start-Run-Enter msconfig-OK In the open dialog, you can set the boot startup items.

There is one of the most effective ways to ban all unnecessary processes.

Click "Start" in the lower left corner of the computer, click "Run", and enter "msconfig" in the run box to confirm.

In the "System Configuration Utility" window that opens, click "Startup" in the upper right corner, click "Disable All" for the following startup options, and then select the ctfmon, that is, only this one is checked, and the rest are not selected. (Because this is an input method,If you don't choose it, start it,There's no input method,In this way,Other messy processes won't start.。 ）

I'm all typing word by word, my own experience and methods, the landlord must give me points. Thank you.

Judging by the name, it is most likely a virus. Install antivirus software with monitoring function to detect and kill viruses, and the antivirus software can check and kill most viruses. In addition, if you find suspicious files, you can upload them to Ruixing engineers for analysis through the official website of Ruixing, and upload the address.

After uploading, you can get the query code at the beginning of rs, and the landlord can query the processing progress and results through this code.

This virus is very stubborn, and I'm cleaning it up, and I just happened to find it here.

First of all, like what I said upstairs, correct the boot startup item, and then kill the Trojan, it should be possible.

If it doesn't work, use 360 security guards to thoroughly kill the Trojan and clean up IE, and it should be about the same.

This one should be a virus!

You can be in:"Launch"Right-click there and delete.

Then open the start menu -- run -- enter msconfig--- start, see if there is anything related to it, and prohibit him from starting.

You can also install 360 Security Guard Cleanup directly!

Judging from the file name,It's really suspicious.,You don't need to put something to start.,The virus can achieve the purpose of booting and starting by modifying the registry.。