Every once in a while, 0x000000D1 0x8E12F0F7, 0x00000002, 0x00000001, 0xBF2c6037

0x000000c2 error indicates that a kernel program or a driver for a hardware device is attempting to perform an incorrect memory operation. This error is usually caused by a bug in the application software or hardware device driver.

If you encounter 0x000000c2 error, we recommend that you first check to see if you have recently installed a new application or hardware device driver. If so, uninstall the recently installed applications or drivers one by one to see if the problem can be resolved. Second, please use the "replacement method" to check whether the computer's memory and motherboard are working properly.

Let's redo the system, if you use ghost, it's better to use the pure version.

There is a blue screen, both software and hardware may be available.

1. From the software aspect, the possible causes and solutions are:

Some ideas for solving the problem, you can try them one by one:

1 Moderate, medium Trojan or malicious program, use anti-software to kill the Trojan virus, 2 Repair IE, use 360, Kingsoft, Rising, etc. can ,,, or directly upgrade the IE browser.

3 Reinstall the graphics card, sound card, and motherboard drivers (especially those of the graphics card), if the problem is not solved, it is best to try it in a different version.

4 Reinstall Direct X

5 You can try uninstalling Microsoft.

6 The application is updated and upgraded as much as possible, and patched, as mentioned earlier.

Change the system, re-download other versions of software or games, 8 is not good, reinstall the system, is the trouble point.

2. Analysis from the hardware aspect.

1。The memory module is broken (mostly second-hand memory).

2。Memory with quality issues is used, or is not compatible well"Pick the board"Memory.

3。The part of the gold finger that is plugged into the motherboard of the memory is too dusty, 4. Different brands of memory with different capacities are used, resulting in incompatibilities.

For memory, you can take it off and wipe the gold finger clean with an eraser, and then go back up, if not, you can swap the slots, in addition, you can turn down the frequency or CAS value of the memory by one level in the BIOS (the larger the CAS value, the lower).

For multiple root memory, you can reduce one of them, and if the problem is resolved, it means that there is a problem with that memory or at least it is not compatible.

5。Thermal problems caused by overclocking, check and improve the cooling conditions.

6 CPU is unstable or even damaged after overclocking, it is recommended to restore the default settings, , if it is bad, it is very cupy, 7 There is a problem with the hardware Replace the hard drive.

8. The motherboard is broken, which can only be ruled out by the replacement method or judged by the debug card.

19 **, mostly memory faults, it is recommended to clean the gold finger and plug it in, and then carry out memory diagnosis.

Unplug the memory and wipe it and try again.