Table tennis raw rubber play, table tennis raw rubber playing formula

Table tennis teaching: how to deal with the long ball under the acute side of the raw rubber play? Table tennis teaching: how to deal with the long ball under the acute side of the raw rubber play? Table tennis teaching: how to deal with the long ball under the acute side of the raw rubber play?

Do you shoot straight or horizontally?

Serve a long ball, as urgent as electricity. Serve short balls, small triangles. I want to attack quickly and hit up.

Push harder, fierce and ruthless. Grinding and blocking, the ball does not go. Pull the arc circle and see the landing point.

Pull forward and punch straight. Pull high hanging, hanging diagonal line. Billiards, pick and twist forehand pick, backhand twist.

Rub on both sides, but you can't turn around. When the pendulum is short, when the split is long. Billiards and dare to get started. Run frequently and turn sideways. On the horizontal board, force the middle. See the straight board, press the backhand.

Adjust the left first, talk and then press the right. To the middle game, rely on strength. Key ball, be bold. Dare to change, don't be conservative. There is a unique job, show a hand. Balls against the wind, to fight. Downwind ball, play normally.

Raw rubber. In addition to being able to play fast smashes, it is also one of its characteristics that it is easy to play a skateboard. For a ball hit by a forehand skateboard, it is often difficult for the opposing swimmer to deal with it.

Using the rapid and changeable characteristics of raw rubber, it can be taken by surprise and unprepared, and it can play a role in the game. As granular glue, the biggest feature of raw rubber is that it has a fast ball speed. Therefore, players who are suitable for offensive style of play can use their own initiative to make better use of the characteristics of raw rubber.

Table tennis raw rubber is a special kind of rubber, which is characterized by soft rubber particles, good elasticity, sinking of the ball, small friction, weakened rotation, and is not easy to eat rotation. The performance of raw rubber is completely different from that of reverse rubber, with weak active rotation ability, sinking, and not easy to eat and turn. In addition, the playing style of raw rubber is also weird, easy to control the spinning ball, and it is also good at attacking with quick dials and bounces.

Therefore, for players with a certain technical foundation and strength, the use of raw rubber can better play their skills and strength, play a more bizarre way of the ball, increase the difficulty of the opponent to receive the ball, and thus occupy an advantage in the game.

However, for beginners or players with a low level of skill, the use of raw rubber may increase the difficulty of ball control, because raw rubber is more technically demanding and requires a certain amount of skill and skill to play well. In addition, raw rubber also has some shortcomings, such as the ability to make rotating balls is weak, and the stability of the balls is not as good as reverse glue. Therefore, you need to choose the rubber that suits you according to your own technical level and strength.

To sum up, table tennis raw rubber is a good choice for players with a certain technical foundation and strength, but for beginners and players with a lower technical level, they may need to be more familiar with and master relevant techniques and skills to play well.

Raw rubber is difficult to control, and it is forbidden to appear in the competition of the youth group, because it is easy for teenagers to play raw rubber to affect the action, once the action is finalized, it is difficult to change. Therefore, raw rubber is generally not recommended for beginners. Most of the users are people who have played table tennis for a period of time and have a certain understanding of table tennis.

If you have poor ball control, don't use raw rubber to play, and the raw rubber style of play is to be flexible and diverse in the movements of the wrist and hand. The ball played by raw rubber will be elusive, and the ball will also have a sinking feeling, which will make people who are very unaccustomed to the opponent of raw rubber for the first time, which is the biggest advantage of raw rubber. But there are also disadvantages to people who also play raw rubber, that is, the raw rubber is too difficult to control, it is difficult to practice well, if there is no certain basic skills, it is easy to practice bad movements, then it will be really good to lose at that time.

Raw rubber. It is a rubber similar to positive glue.

Different from positive rubber, raw rubber particles are relatively soft and have weak friction ability.

The advantage of raw rubber is the speed, the ball is fast, and the ball is heavier.

The opponent's defense is easy to get into the net.

Raw rubber doesn't eat much spin, so there is a certain advantage in receiving serves.

The weakness of raw rubber is that it has a weak rotational manufacturing capacity.

Therefore, like positive rubber, raw rubber can only be moved near Taiwan, and cannot be withdrawn.

And compared with positive rubber, the range of activity of raw rubber is smaller, and there is little room for maneuver.

The raw rubber playing method can only be fast, not slow, only fierce, not stable.

Therefore, the use of raw rubber has high requirements for hand feel and guts.

There are two major problems with raw rubber that are difficult to solve.

First: the raw rubber bullet hits the downspin.

Second: raw rubber defensive arc circle.

If the raw rubber can be used first, it must be fierce, fast, dare to exert force, and cannot hesitate.

Once the raw rubber is counter-glued arc circle first, the defensive pressure of raw rubber is very high.

1.Serve long balls to the backhand, as this style of play restricts their position and makes it necessary for them to move forward. This can disrupt their footwork and reduce the quality of their returns.

2.Serve a short ball (two jumps without a shot) to the middle of the forehand, this kind of ball try not to send to the side.

When raw rubber is used for horizontal backhanding, it is good at bouncing, plucking, backhand pulling, and fast tearing.

Usually you should encounter a straight shot with a lot of raw rubber on the forehand. Straight plate raw rubber hole selling letter is known for dexterity, fast, changeable, low-spin ball can quickly start the board, the ball speed is fast and low. Defend the forward arc circle, afterburner push speed is fast and with slip low, the second jump line is weird, and the raw rubber is easy to rise, easy to buckle the opponent, and easy to push the net.

This is the reason why the raw rubber does not eat the rotation, which is a bit reversed.

Summary. The smooth surface is the reverse glue, and the playing style of this rubber is mainly rotating, with strong rotation force, stable hitting and easy control.

Raw rubber: rubber with particles pointing upwards and a diameter greater than the height. It is characterized by a sinking of the ball and a weak spin of the ball. Since the raw rubber has a rotation-reducing effect, it is particularly easy to control the ball.

Positive rubber: The particles are shorter and larger in diameter than raw rubber. It is characterized by good elasticity, fast speed, stable hitting, and no turning, which is suitable for fast attack near the table, especially the left-push and right-attack type of play, which is one of the most commonly used rubber types for straight-board fast-attack players.

Long glue: The particles are longer, the rubber is softer, and the rubber particles are easier to dump when the ball is in contact with the rubber. When resuming this pour, the rubber particles will give the ball a ** force; Due to the different pressure of the incoming ball and the size of its own force on the rubber particles, a variety of balls with very different characteristics from ordinary positive rubber and reverse rubber are produced, so as to break the opponent's usual power stereotype.

What glue is used for table tennis raw rubber.

Hello, I am inquiring for you here, please wait a while, I will reply to you immediately

Hello, I am glad to answer for you, the professional is inorganic glue.

The smooth surface is the reverse rubber, and the playing method of this rubber is mainly rotating, with strong rotation force, stable batting, and easy control of raw rubber: the rubber with the particles up and the diameter greater than the height. It is characterized by a sinking of the ball and a weak spin of the ball.

Since the raw rubber has a rotation-reducing effect, it is particularly easy to control the ball. Positive rubber: The particles are shorter and larger in diameter than raw rubber.

It is characterized by good elasticity, fast speed, stable hitting, no turning, suitable for mountain sailing and close to the fast attack, especially the left push and right hail attack type with shouting play, which is one of the most commonly used types of rubber for straight board fast attack players: the particles are longer, the rubber is softer, and the rubber particles are easier to dump when the ball is in contact with the rubber. When resuming this pour, the rubber particles will give the ball a ** force; Due to the different pressure of the incoming ball and the size of its own force on the rubber particles, a variety of balls with very different characteristics from ordinary positive rubber and reverse rubber are produced, so as to break the opponent's usual power stereotype.

I hope the above is helpful to you If you are satisfied with me, please give me a thumbs up

How to receive a serve in table tennis raw rubber?

Dear, I'm honored to answer for you, according to your question, there are the following methods: 1. Borrow. When the raw rubber is receiving the serve, it is in a state of loss of control, the rubber is soft, the friction is poor, and the ball cannot be eaten. If you don't control the shape of the shot well, the return ball will not land well, and the opponent will counterattack back.

2. Force. Not all balls can be used when receiving the serve. (1) The direction of force.

For the downspin ball, the force is mainly forward, and a little upward friction counteracts the downspin. (2) The size of the force. For the downspin ball, the force is a little smaller to ensure that there is no mistake.

For topspin balls, the more force you have, the better it can control, but don't use lethal force, just make sure that the power is transmitted to the ball through the baseplate. 3. Forehand attack: When the ball bounces off the table, the racket hand swings from the right side to the front left, and the forearm quickly adducts the force with the wrist to rotate inward to swing along the ball in an arc, and hits the ball in the middle and upper part of the rising period, and the hitting position is at the distance of the forearm in front of the right side of the body.

4. Backhand attack: When the ball bounces off the table, the hand holding the racket accelerates from the left back to the right front, the forearm is mainly forced, the wrist is turned outward, the racket is leaned forward, the center of gravity is shifted to the right foot, and the middle and upper part of the left and right chest hits the ball up. The key and difficult points of attacking the ball are swinging the racket and hitting the ball correctly and appropriately.

5. Return the ball to the landing point. After receiving the serve, the landing point of the long ball should be as long as possible and the angle should be large, so as to destroy the opponent's serve and attack tactics and create conditions for their own attack.