What is the reason why the No. 1 filter element of the Xiaomi water purifier lights up yellow?

The No. 1 filter element of the Xiaomi water purifier flashes yellow.

Reason:Cartridge 1 is expiring, you need to purchase a filter cartridge to replace it.

1. Two ways to replace the filter element.

1. Contact the local Xiaomi after-sales service, and the Xiaomi after-sales service will send a special person to replace it;

2. Xiaomi does not use any professional tools to remove the shell to replace the filter element, and you can buy the No. 1 filter element to replace it.

2. Steps to replace the filter element by yourself:

1. Place the water purifier normally and remove the upper cover upward;

2. Remove the No. 1 filter element with yellow light in the clockwise direction;

3. Place the purchased No. 1 filter element and screw it in in a counterclockwise direction;

4. Cover the cover plate downward, and the filter element is replaced.

Xiaomi water purifier is guaranteed nationwide and enjoys three guarantees of service.

The warranty period is: 1 year warranty.

There are generally three kinds of lights for water purifiers (normal: blue light or green light, after a long period of use, the filter element needs to be replaced: yellow light, the filter element life has expired, and it cannot play a filtering role:

Red light) It is best to contact the original one to replace the filter element when the yellow light is on again. Specifically, you can contact your buyer.

The main purpose of the Xiaomi water purifier filter element indicator is to monitor the filter element life:

1. The light is off, and the filter element is in normal condition;

2. Orange flashing, the corresponding filter element is about to expire, and the filter element needs to be purchased in advance;

3. The orange color is always bright, and the life of the corresponding filter element has expired, and the filter element needs to be replaced and reset immediately.

Chunwang (Du Fu) Wangyue (Du Fu) quatrain (2) (Du Fu).

Summary. Hello The method of replacing the filter element of the Xiaomi water purifier is as follows:1

Close the three-way ball valve, move the main unit out of the kitchen cabinet, be careful not to pull the water pipe and the faucet lead wire too hard, so as not to cause power failure or water leakage, and then remove the old filter element. (When disassembling, select the filter element in the opposite direction to take it out) 2Refer to the filter element installation method to complete the replacement and installation of the new filter element.

3.After powering on, press the "Select" button, select the new filter element indicator, press and hold the "Reset" button for 3 seconds, and after hearing the "Dididi Didi prompt sound, the indicator light will go out, and the filter element will be reset successfully."

Hello, the reason why the shirt is still yellow after the filter element of the millet liquid vertical cavity water purifier is replaced is that you need to choose to reset, and then rinse the millet water purifier for about ten minutes before it turns blue. I hope mine is helpful to you.

I'm sorry I don't understand, but can you elaborate on that?

Hello The method of replacing the filter element of the Xiaomi water purifier is as follows:1Close the three-way ball valve, move the main unit out of the kitchen cabinet, be careful not to pull the blind water pipe and the lead of the water purification faucet, so as not to cause power failure or water leakage, and then take out the old filter element.

(When disassembling, select the filter element in the opposite direction to take it out) 2Refer to the filter element installation method to complete the replacement and installation of the new filter element. 3.

After powering on, press the "Select" button, select the new filter element indicator, press and hold the "Reset" button for 3 seconds, and after hearing the "Dididi Didi prompt sound, the indicator light will go out, and the filter element will be reset successfully."

Kiss is happy to answer for you: Is the filter element of the Xiaomi water purifier still yellow after replacement? A'If it is bright blue, it can be used normally, if it is a yellow light, it will not be used for a long time, and it needs to be turned on for a while, or it needs to be replaced when the life of the filter expires.

If the Mi water purifier filter is still yellow after replacement, there is a high probability that it needs to be flushed or reset, what should I do if the Mi water purifier filter is still yellow after the ridge is replaced, you need to choose to reset the Mi water purifier and then rinse the Mi water purifier + minutes or so before it will turn blue. The filter element replacement method is as follows:1

Close the two-way ball valve and move the main unit out of the kitchen cabinet Be careful not to pull the water pipe and the lead wire of the water purification faucet too hard to avoid power failure or water leakage Then remove the old filter element. (When disassembling, select the filter element in the opposite direction to take it out) 2Refer to the filter element installation method to complete the replacement and installation of the new filter element.

3.After powering on, press the "Select" button, select the new filter element indicator, press and hold the "Reset" button for 3 seconds, and after hearing the "Dididi Didi prompt sound, the indicator light will go out, and the filter element will be reset successfully." Is the life of the filter element of the Xiaomi water purifier calculated by time, the Xiaomi water purifier is judged according to the number of days of use, if possible, the smart point is to record the amount of tap water you have a day, plus the number of days of use, even if you don't use it for a month, I guess it will continue to calculate the consumables, or it can be said that the bacteria in the filter element increase with the increase of use time, so resetting I personally think it is also feasible, but it is not recommended to replace it for several years.

Summary. Hello dear! After the filter element of the Xiaomi water purifier is replaced, the yellow light still needs to be rinsed or reset, and it will take a while to turn on the blue light, because the inside of the device needs to be cleaned.

Hello dear! After the Mi water purifier is replaced, the yellow light still needs to be rinsed or reset, and it takes a while to turn on the blue light, because the inside of the device needs to be ignited and cleaned.

The treatment method of the yellow lamp next to the millet water purifier is: 1. Cut off the water and power, pull out the No. 3 filter element 2, turn the machine upside down at the bottom, pull out the four leather pads, unscrew 3, tear off the trademark label on the back of the machine, there are 4 screws inside, unscrew 4, open the bottom cover plate 5, look inside along the inlet and outlet pipes, you can see two valve bodies, close to the pipe is the valve for sewage discharge, there are two pei Jing screws removed, take out the valve body (be careful not to break the wire), there are two mouths, one of which is with a filter, Unplug it directly, clean it up in the spring, and finally install it back in the same way. In fact, if you have strong hands-on ability, you can remove the 4 screws of the valve body just now and clean the inside, but note that you must record or remember the position of each part when disassembling the valve body, otherwise it will be a little difficult to press back.

Summary. Hello, it's a pleasure to serve you Xiaomi water purifier keeps the orange light on, what's going on.

1. The Xiaomi water purifier keeps turning on the orange light, indicating that it is in an abnormal state. Under normal circumstances, the indicator is green. We can troubleshoot the Xiaomi water purifier from the following aspects.

1) If the Xiaomi water purifier keeps turning on the orange light, it means that the purifier is working abnormally and the water purifier is malfunctioning. It is very likely that the pump is damaged and needs to be repaired by a professional maintenance master.

2) When the life of a certain filter element of the Xiaomi water purifier has reached the limit, then the orange light will always be on. At this time, we only need to buy the same model of filter element, remove the original old filter element, and install the new one.

2. When encountering the situation that the Xiaomi water purifier keeps the orange light on, we can also check the mobile phone APP connected to the water purifier when the water is discharged, at this time, the flushing status will be displayed, if the value slowly decreases, it means that the filter element is dirty and needs to be replaced in time.

The filter element of the Xiaomi water purifier has been bright orange after replacing it.

Hello, I'm glad to serve you, what happened to the little rice water purifier that keeps the orange light on1, the Xiaomi water purifier keeps the orange light on, which means that it is an abnormal state. Under normal circumstances, the indicator is green. We can troubleshoot the Xiaomi water purifier from the following aspects.

1) If the orange light keeps on the orange light of the potato and millet water purifier, it means that the purifier is working abnormally and the water purifier is malfunctioning. It is very likely that the pump is damaged and needs to be repaired by a professional maintenance master. 2) When the life of a certain filter element of the Xiaomi water purifier has reached the limit, then the orange light will always be on.

At this time, we only need to buy the same model of filter element, remove the original old filter element, and install the new one. 2. When encountering the situation that the Xiaomi water purifier has been bright orange with the flushing light, we can also check the mobile phone app connected to the water purifier when discharging water, and the flushing status will be displayed at this time, if the value slowly becomes smaller, it means that the filter element is dirty and needs to be replaced in time.

Since you've just changed the filter, it's most likely that the pump is damaged.

I hope mine is helpful to you and I wish you a happy life.

Is the Xiaomi water purifier filter still yellow after it is replaced? Hello dear, it means that the reset was not successful. It is recommended to press the "Select" button on the Mi water purifier, and the light will flash when the leather brigade selects the indicator light of the corresponding No. 1,2,4 filter element.

The representative is selected. Or press and hold the "Reset" button, it seems to be about 3 seconds, and when you hear the sound of "Didi Di", you can let go, and you will find that the indicator is no longer in a solid yellow state, which means that the reset is successful. No. 1, 2, and 4 filters are all reset once.

Hope it helps. If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

Method 1: Press the "Select" button on the Mi water purifier and select the indicator light of the corresponding No. 1, 2, and 4 filter cartridges, and the light will flash. The representative is selected.

Method 2: Press and hold the "Reset" button, it seems to be about 3 seconds, and when you hear the sound of "Dididi", you can let go, at this time you will find that the indicator is no longer in a solid yellow state, which means that the reset is successful. No. 1, 2, and 4 filters are all reset once.

Precautions for the use of water purifiers:

1. After the water purifier is used, the ultrafiltration membrane filter element should be kept in a wet state. If the ultrafiltration membrane cartridge dries out, it can cause a sharp drop in water production that cannot be recovered.

2. Do not use the water purifier for more than three days, and when you use it again, you should repeatedly rinse the water purifier for 2-5 minutes until the water in the water purifier is exhausted.

3. In the case of tap water stoppage, please open the sewage faucet to drain the sediment and rust in the water pipe, and then open the purification faucet to use clean water.

4. The total water yield of the water purifier is related to the inlet water quality of the water purifier, if the inlet water quality of the water purifier is good, the total water yield will rise, on the contrary, the total water yield will decrease if the inlet water quality is poor, and the service life of the corresponding filter element will be slightly shorter.

5. When the water purifier is used, the water purifier should be washed frequently, which can effectively extend the service life of the water purifier.

6. If the water purifier is used for a long time, its water yield will gradually decrease, but the water quality is still qualified, and Hungerbi can use it with confidence.

7. When the water purifier fails, please close the tap water inlet valve immediately, cut off the water inlet of the water purifier, and do not disassemble the limb state.

Bright blue means that the water quality is normal, if the water quality is not normal, it will be bright orange, and you need to keep releasing water until the light turns blue.

Blue indicates that the water quality is very good, so please feel free to use it.

The faucet light of the Xiaomi water purifier is always bright blue Bright blue means that the water quality is normal, if the water quality is not normal, it will be bright orange, and you need to keep releasing water until the prompt light turns blue.