Market research report on building decoration metal materials aluminum plastic panels

Stone and metal panels belong to two kinds of curtain wall decoration materials, and they constitute the three major curtain wall materials together with glass.

The aluminium composite panels mentioned by the bill of lading should be classified as sheet metal curtain wall materials.

Let's talk about the differences between the two curtain wall materials in terms of application.

The first is the procurement cost, according to the current market commonly used structure comparison, such as aluminum-plastic panels for curtain walls often use 4 cm 30-50 filament fluorocarbon coated structural products, the procurement cost of this material is about 160 yuan square meters, and the same can be applied to the curtain wall decoration of the stone its procurement is higher.

The second is the maintenance cost, for the later maintenance of the stone curtain wall, I think it will be lower, after all, the stone is dirty and wear-resistant, and the damage to the surface is not much if it is cleaned many times. Compared with the surface of aluminum-plastic panels, it is not resistant to dirt, and soft materials must be used to wipe and remove stains when cleaning, and the surface is easy to scratch.

The third is the cost of investment, I don't know what the so-called investment refers to, is for a construction project on the selection of two materials, combined with the amount of funds in the budget or refers to other aspects, if it is with the material design on the drawings after the budget level, then obviously the stone curtain wall will be higher.

The fourth is the applicability of the two materials decorative effect and construction speed, since stone and metal plate are listed as one of the three major curtain wall materials, indicating that each has its own market, one of the first floor has talked about the curtain wall material selection of stone, then it will highlight its solemn atmosphere and heavy feeling, ** organ public buildings commonly used this material; The decorative effect of metal plate is fashionable, lively, and more modern and urban.

In terms of construction speed, if the aluminum-plastic panel material can realize factory construction and assembly form of component workshop, then its construction speed is significantly faster than that of stone materials.

Other deeper understandings still need to be corrected and answered by industry insiders.

There is no standard cost for dry-hanging stone and aluminum-plastic panels, depending on your material choice. The cost of maintenance should not be much different. The cost of investment also depends on your choice of materials.

Dry-hung stone is suitable for the podium of the building, and the floor height is best not too high. Relatively speaking, aluminum-plastic panels can be made of high points, which belongs to the modern style type.

Stone is costly, durable, simple and convenient to maintain, and the effect is also very good, and the speed is slightly slower.

Aluminum plate, and it must be a seamless aluminum plate, and only a seamless aluminum plate, it can only be this, I have suffered a loss, do a store, definitely not a makeshift thing, you put out to customers to see the things must be good things, you take the face of the store with something not decent, then the customer thinks that you are not a high-end product, the loss is very big, don't think about saving money, what you do is to buy and sell, the money-making business must have an outside image to attract traffic, my friends and I have begun to durable and seamless doors, Definitely works well.

Aluminum veneer is an aluminum alloy plate that is first treated by chromization and other treatments, then treated with fluorocarbon spraying, and finally formed by deep processing to form building decoration materials. Its fluorocarbon spraying procedure uses polyvinylidene fluoride resin (kanar500) as the spraying material, and has been sprayed in three layers, including primer, topcoat and varnish. Its fluorocarbon spray coating has excellent corrosion resistance, weather resistance and cold and heat resistance, can resist acid rain, salt spray and various air pollutants, resist strong ultraviolet radiation, can maintain long-term non-fading, non-chalking, and long service life.

At present, aluminum veneer is widely used in building curtain walls, interior decoration, lobby facades, indoor special-shaped ceilings, overpass corridors, canopy airports, stations, hospital conference halls, opera houses, stadiums, beams and columns, balconies, partition decorations, advertising signs, vehicles, furniture, exhibition stands, instrument shells, subways, shipping tools and other fields.

Aluminum-plastic composite panel is a composite material processed by chemically treated coated aluminum plate as the surface material and polyethylene plastic as the core material, and processed on special aluminum-plastic panel production equipment. Aluminum-plastic panel is light in weight, strong in weather resistance, good in plasticity, many colors to choose from, simple in processing, and its unique properties determine its wide range of uses: it can be used for building exterior walls, curtain wall panels, renovation and renovation of old buildings, interior wall and ceiling decoration, advertising signs, display stands, purification and dustproof projects.

It belongs to a new type of building decoration material.

Aluminum veneer is generally made of AA1100 pure aluminum plate or AA3003 aluminum alloy plate with a thickness of 2-4mm, and thick AA3003 aluminum alloy plate is generally used in China; Aluminum-plastic panels generally adopt a 3-4mm three-layer structure, including PVC or PE sandwiched between the upper and lower two. We can see from the material that the cost of aluminum-plastic panel is definitely much lower than that of aluminum-veneer. The 4mm thick composite panel is lower than the aluminum alloy plate**, so the use of aluminum composite panel is lower than the use of aluminum veneer**.

Aluminum veneer is divided into two types: fluorocarbon spraying and roller coating, and the basic domestic application is fluorocarbon sprayed aluminum veneer. The production of aluminum veneer by fluorocarbon spraying is divided into four steps: the first step is sheet metal processing; The second step is pickling and decontamination; The third step is fluorocarbon spraying; The fourth step is quality inspection and delivery.

The processing process of aluminum-plastic panel is more complex than that of aluminum veneer, mainly there are four major processes: formation, coating, composite and trimming, which are all automated production in addition to trimming.

Compared with the two, the service life of aluminum-composite panels is short, while the service life of fluorocarbon sprayed aluminum veneer is more than 20 years. The fire performance of aluminum-plastic panel is not as good as that of aluminum veneer, and the fire performance of aluminum veneer reaches A2 level, which is safer. Therefore, aluminum veneer has become a new favorite of decorative materials, and its application range is more extensive.

There is no good or bad thing, depending on personal needs, my original store is the use of aluminum-plastic panel door, open for a year and a half and then closed, choose aluminum-plastic panel no problem, if you open for three or five years or use aluminum plate door, it is more cost-effective.

I think the aluminum plate is good, easy to clean, and it lasts for a long time. And I heard that there is a self-cleaning aluminum plate door head for the test card. It should be good.

The aluminum plate door head that has been used by the examiner is very cost-effective.

Both have been used. The cost of aluminum plate is relatively expensive, and the advantages are durable. Aluminum-plastic panels are cheaper and have been used for several years.

Tax Classification Code:

Aluminum sheet belongs to a type of building material.

Tax Classification Name:

Aluminum. <>

It refers to plates, strips, foils, bars, profiles, wires, pipes and discharges produced by casting, extrusion or rolling with aluminum as the matrix.

Invoicing Commodity Name:

Non-ferrous rolled material* aluminum sheet.

Nuno Smart Code can find its tax classification code.

Plastic aluminum sheet is made of aluminum sheet that has been surface treated and painted with coating as the surface, polyethylene, polypropylene plastic.

It is a new type of material that is mixed as a core layer and compounded through a series of processes.

It is a new type of material made by surface treatment and coating of aluminum plate as the surface, polyethylene and polypropylene plastic mixed as the core layer, and processed and compounded through a series of processes. Since the plastic aluminum plate is composed of two materials (metal and non-metal) with completely different properties, it retains the original composition material (

Metals: aluminum, non-metals.

Polyethylene.

The main characteristics of the original materials have been overcome, and many excellent material properties have been obtained, such as luxury, colorful decoration, weather resistance, corrosion resistance, impact resistance, fire prevention, moisture resistance, sound insulation, heat insulation, and earthquake resistance; Light weight, easy processing and molding, easy handling and installation.

You refer to aluminum-plastic panels, which are two layers of thin aluminum plates (plus some plastics, generally polyethylene (PE) or polyvinyl chloride (PVC), which materials are easier to cut, light weight, low, and warm, which is now a more popular decorative material.

Aluminum-plastic panel, as the name suggests, is composed of three layers of structure, the bottom and surface are aluminum plates, and the middle sandwich core is a plastic layer, according to the mandatory specifications, the minimum standard required at present is 4mm thick, and the composition is, the surface process is roughly three categories, fluorocarbon roller coating or spraying, powder spraying, and plastic spraying, and can only be used for the first two types of exterior walls.