Choose headphones Have you ever turned up the volume to the maximum so that the people next to you c

Use a headset, the kind that kind of wraps around your ears, do you use a computer or? The one I'm using now is very good, and the sound of the outside world is weakened to a certain extent after taking it, and the sound doesn't need to be turned to the maximum, compared to the big school, it will already be very loud, louder than other headphones I use, and the outside world can't hear anything.

Personal experience, no matter how small the sound of ordinary headphones is, others can hear them, if there is a layer of rubber ring, the kind of headphones like a hair dryer (I don't know if they are called headphones or earbuds), when the volume is turned on, the outside sound is much smaller.

In fact, some earphone cases have a word on it that says, "This product is an open earphone, please don't turn up the sound too loudly so as not to disturb others", and I said that the latter has not been written.

Personally, I recommend Senhai MX360, I feel that the sound is moderate, which is quite suitable for me.

The quality of the headphones lies in the degree of restoration of the sound quality and the quietness when there is no sound, the sound size is not used as a criterion for evaluating the quality of a headphone, if the questioner wants to find a loud voice, go to the stall to see the goods below 38 yuan.

None of the more than 100 are particularly loud.

I want to say yes.

Address your questions to the landlord.

The headphones I use are only a dozen yuan, no matter how loud the voice is, the people next to me can't hear it, yes, how to say it, yes, I don't know how to describe my headphones to you, you can go to the headphones to sell them and consult you

But remember to bargain so as not to be cheapened.

First of all, confirm whether the Yuanxiang earphones are damaged, if there is no damage, it may be a problem with the settings, you can try it by following the following steps:

1. Enter the settings interface.

2. Enter the general interface of cavity elimination.

3. Enter the accessibility interface.

4. On the Accessibility page, slide the list.

5. Find the volume balance and take the bush key, and find that the sound is completely inclined to the left channel.

6. Adjust the channel channel to balance left and right, and the sound can be heard on both sides of the earphone.

Hello, landlord, if you are sure that the volume of the mobile phone has been turned on to the maximum, but the headphones still can't hear any sound. In this case, it is recommended that you first make sure that the earphones match the mobile phone, if the earphones do not match the mobile phone, then even if you turn the volume to the maximum then the earphones will not have any sound, be sure to use the earphones that match the mobile phone. to be able to hear the sound normally.

If the landlord is sure that the headset is matched with the mobile phone, or the mobile phone itself uses the original earphone. In this case, if you don't hear any sound and the volume switch is turned on to the maximum. It is recommended that you can use the external release of your mobile phone to **.

Your multi** file to see if the file itself is without sound, first rule out whether the file is corrupted and so on.

If the phone uses a speaker**, there is sound, and the file is fine**. It is recommended that you can replace other headphones to see if it is a problem with the headphones themselves. Because sometimes there is a problem with the headphones, such as a broken wire or a broken speaker.

There may be no sound.

This is because the sound of the other person's headphones is not turned up.

You can have the person with whom you are talking to make the following settings.

1. Open the QQ chat window, select the microphone icon in the upper right corner, right-click and select "Voice Settings";

2. Remove the checkbox for automatically adjusting the microphone volume and automatically amplifying the microphone volume;

3. Finally, manually adjust the microphone volume to the maximum sound and save it.

If the sound of the left and right earphones of the Bluetooth headset is not synchronized or the volume is inconsistent, you can try the following methods:

1. Make sure that the left and right earphones have been worn and connected to the mobile phone, if only one earbud is connected, you need to put the two earphones into the charging case and reconnect the mobile phone.

2. Confirm whether the sound nozzle steel mesh is stained with oil, sweat or dirt, and use alcohol and anti-static brushes to clean it.

3. If the sound of the left and right earphones is not synchronized, you can go to the mobile phone Settings System Settings (Other Settings) Barrier-free to check whether "Audio Equalization (Left and Right Channel Balance)" is turned on, and try to restore "Audio Equalization (Left and Right Channel Balance)" to the default state.

4. Try to restore the earphones to factory settings.

Classification: 1. Dynamic type.

Dynamic headphones are the most common and common types of headphones, and their driver is basically a small dynamic speaker, and the voice coil in a permanent magnetic field drives the diaphragm connected to it to vibrate.

Dynamic headphones are relatively efficient, and most of them can be driven by the headphone output on the audio, and they are reliable and durable. Generally speaking, the larger the diameter of the driver unit, the better the performance of the headphones, and the maximum diameter of the driver unit in consumer headphones is 70mm, which is generally a flagship over-ear headphone.

2. Moving iron type.

It is a headphone that is transmitted to the center point of a miniature diaphragm through a delicately constructed connecting rod to produce vibrations and sounds. Moving iron headphones can be easily placed in the ear canal due to the much smaller size of the unit.

This effectively reduces the area of the ear part and allows it to be placed deeper into the ear canal. The geometry of the ear canal is much simpler than the pinna, and it is quasi-round, so a soft silicone sleeve can already play a good role in sound insulation and sound leakage prevention compared to traditional earbuds.

3. Ring iron mixing.

The ring iron headset is a dynamic moving iron hybrid drive sound earphone, with a single moving coil, single moving iron, single moving coil double moving iron structure, the advantages of the moving iron unit is high electro-acoustic conversion efficiency, light vibration body, so high sensitivity, good transient performance, so that the original dynamic is difficult to perform, the most dynamic and instantaneous details are highlighted.

The low frequency and mid-frequency are sensitively presented by the moving coil unit, giving full play to the advantages of good low-frequency extension of the dynamic coil and fullness of the mid-frequency and natural transition. The advantages and functions of the moving iron unit are mainly to undertake and supplement the high-frequency attenuation section of the moving coil, starting from the frequency division point of 6kHz, the moving iron unit is responsible for the high frequency, and the high-frequency range is extended to 30kHz.

4. Isomagnetic.

The driver of the isomagnetic headset is similar to that of a shrunken Pinsykai speaker, which embeds a flat voice coil into a thin diaphragm, like a printed circuit board, to evenly distribute the driving force.

The magnet is concentrated on one or both sides of the diaphragm (push-pull), and the diaphragm vibrates in the magnetic field it forms. The isomagnet headphone diaphragm is not as light as the electrostatic headphone diaphragm, but it has the same large vibration area and similar sound quality, it is not as efficient as the dynamic headphone, and it is not easy to drive. <>

In this statement, it is actually necessary to buy a real insurance machine, that is, those relatively high-quality headphones that do not show sound.

Of course, the premise is to see what type of headphones you are suitable for, that is, what type of headphones your ear sockets are suitable for.

For example, the high-end Iron Triangle, Sennheiser, Sony, Edifier, JTR and some other more high-grade ones, these basically no matter how you tune them, that is, buy a wired or Bluetooth headset or that kind of headset, these basically will not leak sound, after all, you get what you pay for.

But if you have a tight budget and a relatively small amount of money, then it is recommended to have a machine of about 100 yuan, that is, if you are used to bringing some comfortable, then the in-ear kind, the in-ear type headphones will be better, after all, if you want not to leak sound, you will concentrate the sound source in your ears, so that the sound will not be exposed.

Then the in-ear type will be better, followed by those brands of Bluetooth headsets, those sound sources are also relatively concentrated, and they are not easy to leak.

Or buy some special listening**, that is, the words are better, and like the headphones pushed out by Netease Cloud itself, as well as the type of headphones pushed out by Kugou, the sound quality will be better, and they are not very good at recording, if you really want to buy those types that match the mobile phone brand, then Xiaomi headphones and Huawei headphones can also be considered.

After all, these brands or headphones are not knowledgeable no matter how they are bought, and if they are not knowledgeable, then there is no problem in buying cheaper, because there is a brand reputation guarantee, so it will not be particularly bad.