How to set up the printer on the company s two computers win10 5

Here's how to do it: 1. After entering the system, click on the "Start" menu and select "Settings".

2. In the pop-up window, find "Add Printer or Scanner". After clicking on it, "Searching for printers or scanners" will appear, and after a while, you can see that "the printer I need is not in the list".

3. At this time, click "The printer I need is not in the list", and in the new window that pops up, you can see 5 single buttons. Select the second item, "Select Shared Printers by Name", and click "Browse".

4. A new window appears after clicking, which is more special here, do not click directly on the remote computer you want to find in the window (because there is a possibility that the connection fails). Directly enter the IP address of the remote computer and click "Select". Remember the direction of the slash and don't get it wrong.

5. At this time, the remote shared printer appears, select the required printer, and click "Select".

6. After selection, if it is normal, the printer will be added automatically. However, this situation will also be encountered, prompting "driver not found", at this time you need to install the printer driver.

7. Take out the CD that you gave when you bought the printer, or search for the printer model**. Follow the prompts to install. There are a few things that need to be clarified here. Here we recommend using "Make sure you want to install the software without connecting to the printer" and do not select another option.

8. After the installation is completed, execute the above steps once. This time, I successfully added the printer. When you finish, there will be a button to print the test page, don't click on it, just click "Done".

Either buy an adapter or set up a shared setup between the two computers.

<> "3. Click the "+ button" on the left side of "Add Printer or Scan Zheng Potato Scanner";

<>6. There will be a driver for you to install, if you have installed the driver in the computer before, you will choose to use the current driver, if not, you need to reinstall the driver.

7. After all is completed, the name of the printer will appear (you can change it by yourself), whether you need to share it, set it as the default printer, and operate according to your own needs;

<> you will find that the printer is already installed.

Processing steps. 1.Test network connectivity.

You can use the ping command to test whether the network connection between you and the shared quiet printer host is connected;

Enter "cmd" in Start and Run (shortcut key win+r) to enter the DOS window. view connectivity;

If you cannot ping, you need to check whether the LAN network and the computer firewall are turned off.

2.Turn on printer sharing.

In the computer control panel - Network & Internet - Network & Sharing Center - Advanced Sharing Settings; Select Enable file and printer sharing for the current network.

3.Direct access.

If the above methods are still inaccessible, you can directly enter the shared host address in the start and run process. Basically, I connect to the printer through this method, and I can add it directly in the pop-up printer window. Luck staring.

Other problems that need to be paid attention to, the printer cannot be directly shared between the banquet and win10 and win7 systems; You'll need to create a homegroup to share printers within the same homegroup.

How to add a network printer to the computer win10 system, Xiaobai can also easily do it!

2.Go to the Win10 Control Panel menu and find Printers & Fax.

3.Go to the Printers & Scanners menu and click Add Printer or Scanner.

4.After clicking on it, win10 will look for printers on the network.

5.If you need a shared printer, you can click Add Device to add it.

6.If you don't find a network share printer, you can click "The printer I need is not in the list".

8.Add a shared printer path that you can connect to, and then the next step.

9.If the shared printer is configured correctly, a message will be displayed to successfully add the printer.

10.Next, complete the steps to add a printer, and set as the default printer will be selected by default.

11.If you add multiple printers, you need to configure a default printer. Click under Printers"management".

12.Then check Manage Device - Set as Default, which sets the current device as the default printer.