Is it really that hard to find a job on a CNC milling machine? 10

You can go to the recruitment class** to see if there should be a job for you. Any work should be done slowly, starting from the grassroots level. There will always be a way out. In addition, academic education is still very important, and you should have time to study for a junior college!

According to the technical requirements such as the shape, size, accuracy and surface roughness of the part, the processing technology is formulated and the processing parameters are selected. The programmed machining program is input into the controller by manual programming or automatic programming with CAM software. After the controller processes the processing program, it transmits the command to the servo.

The servo sends a control signal to the servo motor. The spindle motor rotates the tool, and the servo motors in the x, y and z directions control the relative movement of the tool and the workpiece according to a certain trajectory, so as to realize the cutting of the workpiece. The CNC milling machine is mainly composed of a bed, a milling head, a longitudinal workbench, a transverse saddle, a lifting table, an electrical control system, etc.

It can complete basic milling, boring, drilling, tapping and automatic work cycle, etc., and can process various complex shape cams, templates and mold parts. The bed of the CNC milling machine is fixed on the base for mounting and supporting the various parts of the machine tool, and the console has a color LCD display, machine operation buttons and various switches and indicators. The longitudinal workbench and the transverse slide plate are installed on the lifting table, and the feed of X, Y and Z coordinates is completed by the drive of the longitudinal feed servo motor, the transverse feed servo motor and the vertical lifting feed servo motor.

The electrical cabinet is installed behind the bed column, which is equipped with an electrical control part.

First of all, the operator didn't say whether it was good or not, people who were studious felt too boring and had nothing to do, and people who were not good at learning felt too cool, just sit and watch, and occasionally change parts, which mainly depends on your own self-motivation.

The operator is mainly to set the tool, adjust the fixture, enter and call out the program, watch the machine, change the blank, and inspect the quality of the parts.

Basic introduction

An operator is a person who sells his labor in exchange for money. An operator is also known as an operator.

Operators are blue-collar workers, do not have a high degree of education, generally from junior high school to high school, technical secondary school education, mainly engaged in assembly line work on the production line of electronic factories, the work content is simple, but the requirements are very careful.

Employment With the development of China's reform and opening up, there are more and more domestic and foreign-funded enterprises, mainly Japanese, South Korean, and Taiwan-funded enterprises, which are mainly engaged in the production of electronic products, mainly concentrated in the Yangtze River Delta (Suzhou, Wuxi, Shanghai) and the Pearl River Delta (Shenzhen, Guangdong), Tianjin, Qingdao and other places.

Operators are generally migrant workers, blue-collar technicians, and technical school graduates, who want to find the most suitable job, generally through the Career Guidance Center. In addition, job fairs, newspaper recruitment information, and acquaintance introductions are also current employment channels.

At present, these job seekers will be looking for jobs in Ganji.com, migrant worker network, worker recruitment network, etc., and these groups are mainly the new generation of migrant workers.

The work is OK, the technical worker must be stronger than the general worker, but to be honest, it is also dirty, now many are private small workshops, large companies are cleaner, if there is a master with you you will develop faster, but you still have to rely on your own efforts to learn, to study yourself, in general CNC is still quite easy to learn, if you want to learn to be proficient, you have to work harder to learn, not barbaric you said that I also did CNC before, now do equipment maintenance.

The working hours and treatment are not determined by the company's arrangement, and the nature of the work should not be tiring, as long as you want to learn programming.

CNC operators will definitely be a little tired, if they do batch products and repeat the same action every day, they will feel a little tired.

If you don't make a batch product, every part has to be programmed if you want to think about the process. You need to concentrate and feel tired.

However, if you like to do CNC operation work, you won't feel tired.

It still feels good to continue to learn at work, improve yourself, and develop in the direction of CNC programming.

As long as you have the heart to develop in the direction of programming, and you are not making a mass product, it is easy to achieve.

If you want to learn CNC programming, then you can directly learn CNC programming, and you only need a simple understanding of the operation.

The front line is tired!

It's the work of a general worker!

Programming depends on whether you want to learn or not, operate the machine every day, learn with your heart, and understand it quickly.

It contains 77 poems, a total of 311 poems, 38 poems by Du Fu, 29 poems by Wang Wei, 27 poems by Li Bai, and 22 poems by Li Shangyin. Glossary More Brochures.

It is possible to mix into a liquid. For example, sugar water and salt water.

1, generally speaking, the lathe will be more difficult than the milling machine, if it is a CNC lathe will be easier to master than the milling machine, technically the requirements of the lathe are higher, the money depends on what to receive, the price and the connection has a direct relationship, not CNC, the lathe of course more technical Technicians know that the lathe is the mother machine of all machine tools.

The lathe is the workpiece rotation, and the milling machine is the tool rotation.

The general CNC lathe only has two servo axes, while the CNC milling has at least three.

If it is a machine tool, the general milling machine is more expensive, and it is used more in more complex processing, and the lathe can generally only process the rotary body, and there are requirements for parts.

If it is an operation, it is almost the same, the two are connected, as long as the system is the same, it will basically be used, the current operation panel is standard, and the current CNC process can be automatically generated**.

If it is a process, it is no problem to master some modeling software such as UG and their automatic ** generation.

2. The salary mainly depends on the company's wage standard, welfare and reward and punishment system, as well as overtime and piecework wages, which are directly linked to the company's efficiency. Again, it is the technical level of the individual, and the salary of people in the same position in the same company is often different.

3. Overall, the talents of lathes are now in short supply. Finally, it's up to you. Your life is on your own, no one can control you!