How to delete a partition and allocate the capacity of that partition to a specified disk?

1。Adjust partition capacity: Run partitionmagic, select "Adjust the capacity of a partition" in the taskbar on the left side of the software window, the "Adjust Partition Capacity Wizard" will pop up, click "Next", first select the hard drive you want to adjust the partition, and then enter the next step to select the partition you want to adjust the capacity.

The dialog box that appears next shows the size of the current hard disk capacity and the minimum and maximum allowable capacity. You can enter the size of the changed partition in the value box for "New capacity of the partition". Note: The maximum value cannot exceed the maximum capacity allowed in the prompt above.

Then in the next dialog box, select which partition you want to reduce the capacity to replenish the partition you are adjusting.

Finally, you need to confirm the changes made on the partition. In the dialog box, there will be a comparison between the before and after adjustments, and after the check, you can click the "Done" button to return to the main interface.

The above is just a plan for the partition adjustment, and to make it work, you need to select the "Apply" button in the lower left rail. An Apply Changes dialog box pops up, select Yes to start making adjustments, and the Process dialog box pops up. There are three progress bars that show the operation process, and you will only be done by restarting your computer when you are done.

In addition, the operation process takes a long time, in this process, you must take care of the children at home, as well as cats and dogs, do not let them get close to the computer, and pray that the power will not be cut off. 2。Merge partitions (must be adjacent partitions).

In the main interface of PartitionMagic, select the partitions you want to merge, right-click, and select the Merge command from the shortcut menu that pops up, and the Merge Adjacent Partitions dialog box opens. Select the partition you want to merge in the Merge Options column, and then specify the name of the folder where you want to store the merged partition data in the Folder Name field (if you want to merge two partitions into one partition, the entire contents of one of the partitions participating in the merge will be stored in the specified folder of the other partition). Finally, click OK.

Here's how to delete redundant splits on your computer:

1. The user is in"File Explorer (button)."Left-click.

2. The user is in"This PC (tree project)."Right-click (in"File Explorer"Medium).

3. The user is in"Management (g) (menu items)."Left-click.

4. The user is in"Disk Management (tree project)."Left-click (in"Computer management"Medium).

5. Delete the disk user in"Computer Management (Windows)."Right-click.

6. The user is in"Delete volume (d).menu items)."Left-click.

7. The user is in"Yes (y) (button)."Left-click (in"Delete the simple volume"Medium).

8. Delete the disk.

If you want to delete all partitions in your hard drive, you can do so by following these steps:

Please note that it is important to back up important data before deleting a partition, as deleting a partition will erase all data on the partition.

1.Open Disk Management Tools: Right-click"My computer"or"this PC"icon, select "Manage", and then select "Friend Disk Management".

2.Identify and select the hard drive: In the Disk Management interface, find the hard drive you want to delete the partition to. Make sure you choose the right hard drive, as deleting a partition is an irreversible operation.

3.Delete a partition: Right-click the partition you want to delete and select Delete Volume. A confirmation dialog box will pop up, confirm the deletion operation, and click "Yes" to delete the partition.

4.Repeat step 3 to delete all partitions on the hard drive. This step needs to be repeated for each partition that you want to delete.

5.When you're done, you'll see that all the space on your hard drive is marked as "Unallocated". If you want to repartition or format, you can right-click on the "unallocated" space and select the appropriate action to follow the wizard to set it up.

Please note that after deleting a partition, all data on the partition will be wiped out and cannot be recovered. Therefore, before deleting partitions, make sure to back up important data to prevent data loss.

You can also use Aomei Partition Assistant to delete the partition of the disk with one click or delete it individually.

You can try to remove the first hard disk, install only the second hard disk, boot PE, and delete all partitions of the second hard disk if you can enter PE, so that you can delete the active partition and boot files. If you can enter the PE system, follow the steps below.

Tools: Computer Slides.

1. After entering the startup interface, click "Start PE System".

2. Wait for a while, enter the desktop, and click on the desktop partition tool.

3. Click Hard Drive at the top of the software, and then click Delete All Partitions on the menu.

4. In the pop-up dialog box, click [Yes], which will delete the content from the hard disk.

If the disk capacity is allocated to another partition, disk merging is required.

The specific operation steps are shown below

1. Open the Windows 10 system, right-click on the desktop and select "This Computer", select "Manage" in the right-click menu, and click Open.

2. Select "Disk Management" in the window and click Open.

3. Then, select the disks you want to merge, and select "Delete Volume" in the right-click menu to delete them.

4. Then, select another disk and select "Expand Volume" in the right-click grinding menu to solve the problem.

Ways to partition hard drive without deleting data Steps:

1. The new partition needs to compress a part of the space in the existing partition. You can find a partition with a large amount of free space, right-click, and compress the volume.

Prompt query space:

Just choose the right capacity.

2. After compression, you can directly click to create a new partition, or you can merge it into a nearby partition. The method of merging is to right-click on a nearby partition and expand the volume:

The later process is also similar to compressing a volume.

3. If you want to merge existing partitions, delete an unwanted partition in the disk manager. Back up the important files to another partition before deleting them. Then expand the volume.

, partition:

1. Create a partition:

1. Right-click: "Computer" on the desktop, left-click: Manage, left-click under "Computer Management": "Disk Management" under "Storage", you can see the hard disk partition on your computer.

2. Right-click the partition you want to divide, a drop-down menu will appear, left-click: "Compress Volume", a Compress Volume dialog box will appear, this dialog will show the size of the original partition and the amount of space that can be compressed (that is, split).

3. Enter the capacity to be reduced in the "Enter Compression Space" field (note that the unit is MB, 1G=1024), and then click the "Compress" button, and the system will start compression.

4. After the compression is completed, the divided space is behind the original partition, named "free space" (or unallocated), right-click the "free space", the drop-down menu appears, select "New Simple Volume", the "New Simple Volume Wizard" dialog box appears, and left-click the "Next" button all the way until "Completed". Reboot later, and then there will be a new partition.

Format the hard disk Reallocate the capacity of the hard disk Use Partition Master Because there are things in the hard drive, it is easy to damage the files C drive is a system disk, do not use it lightly.

XP can be used with partition magic. Not if it's Vista or 7, there doesn't seem to be a better tool at the moment.

Primary partitions and logical partitions are unequal concepts.

Hard disk partitions can be divided into primary partitions and extended partitions.

Logical partitions can be created in the extended partition.

If you want to merge the primary partition with the logical partition, you need to delete the extended partition where the logical partition is located, and then delete the primary partition, so that the entire hard disk has no partition, and then re-divide the entire hard disk into a primary partition.

Of course, with software such as PQMAGIC, it is more convenient to adjust. To be something else again.

After deleting all three logical partitions, they should be merged into one extended partition, and after deleting the extended commons, they will become unallocated space. At this point, you delete the main partition and they'll be together.

We recommend you to use Acronis Disk Director Suite 10 English version, which can perfectly lossless partitioning, partition merging, adding C drive and other functions! **Address.

Tutorial installation processIf you have any questions, you can send me a message.。。。

Use PQ. What I don't understand is that you deleted the main partition, so how do you start it.

Win7 system comes with partition function,Right-click on the item in the disk menu you want to partition with compressed space。

PQ partition is not difficult to use but easy to cause data loss, it is best to make a backup when partitioning, you had better transfer the data in the partition you want to adjust to the disk that does not need to be adjusted, and the blank partition is adjusted faster.

1. Open the partition tool window, right-click the disk you want to adjust the partition (Example D), select "Adjust Capacity Move", and next.

2. In the "Adjust Capacity Move Partition" dialog box that opens.

Free space: 0

New Capacity: Enter a numeric value.

After free space: 0

Cluster size: Default, OK.

3. Display the newly separated disk "Unallocated", right-click the "Unallocated" partition, select "New", and open the "Create Partition" dialog box.

4. In the "Create Partition" interface.

Create as: Select a logical partition.

Partition type: ATF32 or NTFS

Label: Default.

Size: Default.

Cluster size: Default.

Drive Letter: Default, hit "OK".

5. Hit "Apply" in the lower left corner, and the "Apply Changes" dialog box appears, "Yes".

6. The progress is displayed, and the "Process" dialog box appears, "OK".

7. Open the window of the person's computer and see if the d is separated.

If it's a win7 system, it's okay in disk management. Open the disk management tool --- right-click on your D drive, there is a compression space, and the system will automatically compress it according to the disk capacity.

It is recommended to back up important data. Because all methods are not 100% successful.

It is certainly not safe to repartition the partition where the data is stored, and the data will basically be lost. If you really want to partition, then transfer things to another partition first, and then turn them back again.

Hope it works for you.

But beware: if there is a pause in the middle of the pause, similar to suspended animation, you have to wait.

Don't undo an action in the middle of it.

Otherwise, the data is not guaranteed!