What is the difference between an electric tricycle 48V700W motor and a 48V800W motor?

Updated on Car 2024-03-04
13 answers
  1. Anonymous users2024-02-06

    The 800W motor is 14% more powerful than the 700W motor. 48V is composed of 4 12V batteries connected in series. The battery has a large capacity, a long service life and a long driving range.

    The battery capacity remains unchanged, the motor has high power, strong load capacity, high power consumption, and shortened service time and mileage. Choose the motor power, just enough, meet the needs, the power consumption is not too much, the economy is good, and the cost performance is high.

    The speed is 35km h, and the mileage is s=35.

  2. Anonymous users2024-02-05

    An 800W motor is 14% more powerful than a 700W motor. The 48V consists of 4 12V batteries connected in series. The battery capacity is large, the service life is long, and the driving range is long.

    The battery capacity remains the same, the motor has high power, strong load capacity, high power consumption, and shortens the use time and mileage. Choose the motor power, just enough, can meet the needs, the power consumption will not be too much, the economy is good, and the cost performance is high. If the battery is a new 48V, 60Ah, 800W motor.

    s=35×。

  3. Anonymous users2024-02-04

    From the outside, the 48V800W motor is slightly larger; From the parameter point of view, the 48V800W motor has a large power of 100W; From the perspective of power consumption, in the same time, the 48V800W motor consumes more power. From the inside of the motor, the coil cross-sectional area is larger; Of course, in the same time, there are many preparation fields.

  4. Anonymous users2024-02-03

    There are differences between these two types of motors in terms of voltage and power, first of all, the voltage, 48 volts and 60 volts can not be universal, it will burn out the motor, so it must be matched with the battery. Speaking of power, the higher the value, the greater the power of the motor, the more powerful it is, and this kind of motor will be equipped with that kind of high-end and low-grade differential.

    You just need to match the battery when you buy it, don't buy it wrong, this is not necessarily good if you look at the large value.

    Electric machinery (English: electric machinery, commonly known as"Motors") refers to an electromagnetic device that realizes the conversion or transmission of electrical energy according to the law of electromagnetic induction. In the circuit it is indicated by the letter M (D in the old standard).

    Its main function is to generate driving torque, as a power source for electrical appliances or various machinery. Generators are denoted by the letter G in the circuit. Its main role is to use mechanical energy to convert into electrical energy, and the most commonly used at present is to use thermal energy, water energy, etc. to push the generator rotor to generate electricity.

  5. Anonymous users2024-02-02

    The electric power of 1000 watts of electric vehicles is much larger than that of 800 watts, and it is much larger to transport heavy loads when used, and the rated voltage needs to be higher!

  6. Anonymous users2024-02-01

    The difference is bigger, the power is definitely powerful, and the loading is more.

  7. Anonymous users2024-01-31

    The difference is that the power is definitely powerful, and the load is more.

  8. Anonymous users2024-01-30

    800W is different from 1000W motor power, and the former will provide slightly weaker power. In terms of bearing capacity, of course, the 1000W motor has a stronger load capacity. However, under the same conditions, the 800W motor will consume less power than the 1000W motor, and it is relatively cheaper.

    Both have their own advantages, depending on whether consumers are more inclined to load or battery life.

  9. Anonymous users2024-01-29

    Electric tricycles.

    The differences between 60V and 48V are as follows:

    1. Different configurations: The configuration and the number of batteries are different.

    2. The battery is different: the battery pack of a 48V electric vehicle is composed of 4 batteries. 60V electric vehicle battery.

    There are five pieces. The driving power of the two cars is completely different, and the endurance is also very different.

    3. The power is different: the 60-volt electric car is also very good in many aspects, and the power of the motor is relatively large, but the 48-volt car is enough for use, and the 60-volt electric car will be better.

  10. Anonymous users2024-01-28

    The 800w motor of the battery car has a large power, which should be relatively fast, with a large load capacity but it consumes electricity. The 400W motor has small power, relatively small load capacity, and the speed is not as good as the 800W but relatively power-saving.

  11. Anonymous users2024-01-27

    First, ** is different

    A 48V EV will be lower than a 60V EV.

    Second, the configuration is different

    The battery pack of a 48V electric vehicle is generally composed of 4 12V batteries in series, and the 60V battery is connected with 5 batteries, and the configuration of a 60V tram will be relatively higher.

    Third, the power is different

    Generally, the motor power used in 48V electric vehicles is 350W, and the motor power of 60V electric vehicles will be higher, 600W or 800W.

    Fourth, the driving speed and carrying capacity are different

    The speed of 60V electric vehicles is generally higher than that of 40V electric vehicles, and their carrying capacity is naturally different.

    Fifth, the difficulty of disassembly is different

    Most of the batteries of 60V electric vehicles will be welded in the battery car, and it is not as easy to disassemble as 40V.

    Motor power calculation formula:

    1. Three-phase: P u is the line voltage, a certain phase current.

    When the motor voltage is 380 volts, it can be calculated by the following formula:

    Motor power = root number 3 * current *

    Substituting 1 kW into the above equation, we can get that the current is equal to.

    2、p= f×v÷60÷η

    In the formula, p power (kw), f traction force (kn), v speed (m min), efficiency of transmission machinery, generally around.

    In this example, if you take =, k=, then:

    p= f×v÷60÷η×k = ×60 ÷60 ÷ = kw

    The above content refers to: Encyclopedia - Power Calculation Formula.

    The above content reference: Encyclopedia - battery car.

    The above content reference: Encyclopedia - Motor Stage.

  12. Anonymous users2024-01-26

    Electric tricycle How much is the difference between an 800 watt motor and a 650 watt motor.

    Kiss Glad to serve you Electric tricycle The difference between 800 watt motor and 650 watt motor: Compared with 800w motor, the power difference between 650w motor and 800w motor is 23%, and the load and climbing ability are worse. The advantage is that under the same conditions, the battery life and the driving range of the hall are longer.

    The power of the drag is not the same, so there is a difference in speed and the load capacity of the coarse celery. The motor performance of the 800 watt stool calendar is higher than that of the 650 watt. If the motors 800 watts and 650 watts are accurate, the 650 watts run fast with the same controller.

  13. Anonymous users2024-01-25

    Summary. A 60-volt electric tricycle cannot be used with a 48-volt motor. The tricycle uses a voltage of 60 volts, the 48-volt motor is less than 60 volts, and the voltage provided by the electric three-wheeled battery is too high, and it is easy to burn the motor and cannot be used, so the 48-volt motor cannot be used.

    We must learn more common sense of electricity in our daily life, and don't do it if we can't, so as not to cause unnecessary personal danger and economic losses.

    Can the 60V and 48V motors of electric tricycles be universally used?

    A 60-volt electric tricycle cannot be used with a 48-volt motor. The tricycle uses a voltage of 60 volts, the 48-volt motor is less than 60 volts, and the voltage provided by the electric three-wheeled battery is too high, and it is easy to burn the motor and cannot be used, so the 48-volt motor cannot be used. We must learn more common sense of electricity in our daily life, and don't do it if we can't, so as not to cause unnecessary personal danger and economic losses.

    I hope the above helps you If you are satisfied with me, please give a thumbs up Thank you and have a great day.

    Hello dear, please describe your question in detail, I will answer it for you.

Related questions
15 answers2024-03-04

It is necessary because in recent years, electric tricycles and electric vehicles have become very popular in rural areas, basically one per person. However, due to the use of electric vehicles in rural areas, people's traffic awareness is weak, resulting in many unnecessary traffic accidents. From the historical development of rural areas, it can be seen that tricycles have developed from the original unicycles, energy storage vehicles, and human-powered scooters to human-powered tricycles, motorcycle tricycles, and electric tricycles, and have become indispensable means of transportation in rural areas. >>>More

7 answers2024-03-04

You have to change the carburetor, buy an autothrottle carburetor, there is the kind that can't get into the motor, so the controller also has to buy one, and that's it.

5 answers2024-03-04

...It should be said that it is reasonable to choose a 48v electric bike. According to the electrician's operating procedures, DC 48V or less is the safe voltage, which meets the safety regulations. >>>More

16 answers2024-03-04

OK. 36v to 48v is the cheapest. Install the charger to change to a 48V charger, in addition to extending the charging time by 2-3 hours, the other effects are the same 2 meters can also be changed to 48V, the display is basically accurate. >>>More

5 answers2024-03-04

1. Before the drill pipe starts, the rider also needs to relax his mind and muscles, and his legs naturally clamp the car body. After the start of the pile, it is necessary to find the angle and speed of the input rod, if the angle is too large or the speed is too fast, it will cause the car body to not have enough steering space and press to the limit width line. The correct approach is to choose to enter from the middle of the sideline and the benchmark in the first or second gear, and after entering, it is necessary to properly cooperate with the oil separation, and try to maintain a semi-linkage state, so that the power output can be cut off in time for corresponding adjustments. >>>More