The installation method of the sliding brace hinge, the master will teach you the installation metho

First, the selection of sliding brace.

The selection of the sliding brace is determined according to the size of the window type and the weight of the window

1.Requirements for sliding bracing The weight of the sash (sash profile weight + glass weight) Safety factor.

2.The length specification of the sliding brace is selected: under normal circumstances, it is 2 3 of the window width, and when the window is lighter, it can be 1 2. When the sliding brace is selected for the above-hung window, the sliding brace selected under normal circumstances is 1 2 of the window height.

3.According to the actual situation, select the sliding brace that meets the above conditions at the same time, and the sliding brace specification and the corresponding specification length in the sliding brace specification table can be queried when choosing.

Second, the installation of the sliding brace.

1.The sliding brace fastens with M5 8 stainless steel countersunk screws or stainless steel self-tapping pan head screws.

2.According to the actual situation, the reasonable use of screws or screws, Jun Kee Hardware recommends that countersunk screws must be used wherever there are counterbores; Use pan head screws in the chute or where there is no counterbore, and use the screws correctly to ensure that the sliding brace is firm and reliable after installation.

3.The sliding brace must be tightly connected with the window sash and window frame, and must not be moved lightly. All screw holes must be screwed or screwed, and any less will affect the load bearing of the sliding brace when used.

4.It is recommended that when the thickness of the profile is less than that, if necessary, the bottom of the aluminum profile should be lined with steel and fixed with pan head screws.

3. The size of the sliding brace for the profile is required.

The sliding brace needs regular maintenance, and the bottom groove of the sliding brace should avoid falling into hard debris such as sand, cement lime, acid and alkaline corrosion and too much dust, etc., which will cause the window to open and close unsmoothly, and some lubricating oil should be added to the sliding brace regularly.

Used in casement windows, the general sash width is not more than 750mm.

It is made of high-quality 304 stainless steel and meets the standard of JG T127-2014 "Building Hardware and Sliding Brace".

After 50,000 times of strict testing of repeated opening and closing, the performance of the product in all aspects remains good.

Hello, I am the designer of our company, responsible for the design of the wind brace sliding brace, first talk about the sliding brace, the sliding brace is installed at the upper and lower ends of the outer casement window, through the sliding brace can open and close the window and support the sash, there is a kind of sliding brace is installed at both ends of the upper hanging window, the wind brace is also installed in the upper hanging window, but it is only a supporting role, because the upper hanging window window will be closed when the wind blows, so there must be a wind brace support. You don't understand the window type I said, you can search on the Internet, and I can't tell you clearly, so what else do you think you need to continue asking. The hinge is actually the name of the sliding brace and the wind brace in the past, because the hinge contains too wide, so it is now generally standardized to be called the sliding brace and the wind brace.

The hinge installation method is as follows:

1. Insert the hinge into the base, and then gently press the hinge arm with your fingertips, and at the same time, you can hear a "click", indicating that the hinge arm is safely hooked to the hinge base through five fulcrums. In principle, the quick-release process is done in a top-to-bottom cross sequence, with the uppermost hinge taking on the entire weight of the door.

2. In order to enhance the storage function of the kitchen, it is indispensable to design some tall cabinets, some of which are cabinets with open doors, which are also inseparable from flap hinges. Hinges can be installed on the upper flap and side flap respectively, so that the flap can be added at the end, which brings a lot of convenience. Hope mine can help you. Brother Fiber.

The hinge installation method is as follows:

1. Insert the hinge into the base, and then gently press the hinge arm with your fingertips, and at the same time, you can hear a "click", indicating that the hinge arm is safely hooked to the hinge base through five fulcrums. In principle, the quick-release process is done by crossing the door from top to bottom, with the uppermost hinge taking on the entire weight of the door.

2. In order to enhance the storage function of the kitchen, it is indispensable to design some tall cabinets, some of which are cabinets with open doors, and this kind of cabinet is also inseparable from the hinge of the turning Li Chong plate. Hinges can be installed on the upper flap and side panels respectively, so that the flap can be added at the end, which brings a lot of convenience. Hope mine can help you.

Summary. How to install the straight-bent hinge: First of all, determine the installation position of the dumpling chain and mark the line, clean the place that needs to be marked on the door panel, and ensure that there is no dust on the surface.

Then prepare the super glue, cover the dumpling chain with super glue, and then put the dumpling chain on the cabinet door where the line is marked, and then press it hard. Next, open the dumpling chain into the sleeve and align with the side panel, fix the base of the dumpling chain, and finally adjust the position of the dumpling chain, pay attention to the hinge and the door panel gap to keep about 2 mm.

How to install the straight-bent hinge: First of all, determine the installation position of the dumpling chain and mark the line, and clean up the place where the line needs to be marked on the door panel to ensure that there is no dust on the surface. Then prepare the super glue, cover the dumpling chain with super glue, and then put the dumpling chain on the cabinet door to open the marked place, and then press hard.

Next, stare at the dumpling chain into the set and align with the side panel, fix the base of the dumpling chain, and finally adjust the position of the dumpling chain, pay attention to the hinge and the door panel gap to keep about 2 mm.

I don't know how to install it.

First of all, determine the position of the dumpling chain and mark the line, and clean the place that needs to be marked on the door panel to ensure that there is no dust on the surface. Then prepare the super glue, cover the dumpling chain with super glue, and then put the dumpling chain on the cabinet door where the line is marked, and then press it hard. Next, open the dumpling chain into the sleeve and align with the side panel, fix the base of the dumpling chain, and finally adjust the position of the dumpling chain, pay attention to the hinge and the door panel gap to keep the empty bush about 2 mm.

The installation and adjustment method of the hinge is as follows:

1.Install the hinges.

Install the hinges on the door and door frame and fix them with screws. It is important to note that the position and fixing method of the hinges need to match the door and door frame to ensure safety and stability.

2.Adjust the hinge mold height.

You can use a screwdriver to adjust the height of the hinges so that the door fits snugly against the door frame. It is important to note that excessive force should be avoided when adjusting, so as not to cause damage to the hinges and doors.

3.Adjust the lateral position of the hinge.

You can use a screwdriver to adjust the lateral position of the slag hole of the hinge so that the door is horizontal and perpendicular to the door frame. It is important to note that excessive force should be avoided when adjusting, so as not to cause damage to the hinges and doors.

4.Adjust the hinge opening and closing angle.

You can use a screwdriver to adjust the opening and closing angle of the hinge to make the opening and closing of the door smoother. It is important to note that excessive force should be avoided when adjusting, so as not to cause damage to the hinges and doors.

It is important to note that the size and position of the door and door frame should be measured to select the appropriate hinge and adjustment method before any installation and adjustment is made. At the same time, it is also important to choose the right tools, such as screwdrivers, wrenches, etc., to avoid damage to the hinges and doors. If you encounter difficulties or are unsure about how to operate, it is recommended to seek professional help.

The installation adjustment method of the <> hinge is to first determine the installation position, then pre-drilling, and finally adjust.

1.Determine the installation location: First of all, you need to determine the installation location of the hinges, and choose the appropriate hinge type and number according to the size and weight of the door or cover plate to be installed.

In general, a hinge needs to be installed at the upper and lower ends of the door or cover, and a corresponding number of hinges need to be installed in the middle of the door or cover.

2.Pre-drilling: After determining the installation position of the hinge, it is necessary to pre-drill the door or cover. The diameter of the pre-drilled hole needs to be selected according to the screw size of the hinge, in general, the diameter of the screw is 3mm, and the diameter of the pre-drilled hole is about .

3.Adjustment is positive: After the hinge is installed, it needs to be adjusted.

The first step is to adjust the height of the hinges so that the door or cover is flush with the frame. The hinges then need to be adjusted so that the door or cover does not collide with surrounding objects when opening and closing. Finally, the tightness of the hinges needs to be adjusted so that the door or cover does not open and close too loosely or too tightly.

Expand your knowledge:

The hinge is an important part of connecting the door or cover and the frame, and its function is to enable the door or cover to open and close, and remain stable. There are many types and types of hinges, and choosing the right hinge according to your needs can improve the service life and safety of the door or cover. In addition, the material of the hinge is also very important, in general, stainless steel hinges have good corrosion resistance and wear resistance, suitable for use in wet or corrosive environments.

The installation and adjustment method of hinges is an important link in the installation process of doors and windows, and the correct installation and adjustment can ensure the use effect and safety of doors and windows. This article will introduce the installation and adjustment method of hinges to help readers master the correct installation skills and precautions.

Before installing the hinge, you need to understand the following basics: plain bearings, ball screws, etc. Knowing this knowledge will help you to better install the hinges and thus avoid unnecessary troubles due to improper operation.

The next step is the installation step of the hinge: the first is to do the selection of parts, and the product with high stability should be selected. The second is the assembly process, which should be assembled according to the steps on the instructions to ensure that each part is installed in place.

Finally, there is the adjustment process, which generally adopts two ways: manual and electric. Manual adjustment refers to the adjustment with a tool such as a screwdriver or wrench; Electric adjustment is operated by means of a remote control or an electric control system. The adjustment should be carried out according to the actual situation, follow the principle of gradual adjustment, and avoid one-time adjustment in place.

After introducing the installation steps, let's take a look at how to adjust the hinges. The adjustment of the hinge is mainly divided into two ways: manual adjustment and electric adjustment. Manual adjustment requires the use of tools such as a screwdriver or wrench, and the specific operation method is as follows:

First, adjust the hinge to the appropriate ruler position, then insert the screwdriver or wrench into the corresponding screw hole, and rotate the screwdriver or wrench counterclockwise until the door or window is completely open or closed. If you need to make an angle adjustment, you can insert a screwdriver or wrench into a different screw hole and make a fine adjustment. The electric adjustment needs to be operated by a remote control or an electric control system, and the specific operation method is as follows:

First, turn on the power switch, then select the hinge that needs to be adjusted and press the corresponding button, and the door and window will automatically open or close at the set angle. If multi-level adjustment is required, it can be achieved by remote control or electric control system.

Case studies are also very important in practical applications. We can use the example of a swing door: first open the door to the appropriate position, and then adjust the hinge to a horizontal position.

The door is then operated by means of a remote control or electric control system, which closes slowly. In this process, it is necessary to pay attention to the fact that the doors and windows should not touch the wall or other obstacles when they are closed, otherwise the use effect will be affected.

Installing and adjusting hinges is an important step to ensure the proper use of windows and doors. Here's how to install and adjust the hinge:

Install the hinges. : First of all, determine the installation location of the hinge, and it is usually necessary to choose the appropriate hinge model according to the size and weight of the door and window. Then, use screws to secure the hinges to the door and window frames and door panels.

Make sure the screws are secure for safety and stability.

Adjust the hinge height: If the door or window is unbalanced when closing or does not match the gap with the floor, you may need to adjust the height of the hinge. Generally speaking, there will be some adjusting screws or nuts on the hinge, and the height of the hinge can be changed by rotating the screws or nuts.

According to the actual situation, gradually adjust the height of the hinge until the door and window are closed and the gap with the ground is even.

Adjust the tightness of the hinges: The tightness of the hinges also needs to be paid attention to. If the door or window feels loose or strained when opening or closing, you can change the tightness by adjusting the screws or nuts on the hinges.

Rotate the screw or nut and gradually increase or decrease the tightness of the hinge until it meets personal preference and actual needs.

Check the opening and closing performance of doors and windowsAfter installing and adjusting the hinges, test the opening and closing performance of the doors and windows. Make sure windows and doors open and close smoothly without jamming or friction.

If a problem is found, the hinge can be adjusted again on a case-by-case basis until the requirements are met.

It is important to note that the installation and adjustment of the hinges may vary depending on the model and brand。Before installation, it is best to consult the specific installation instructions or consult the relevant professionals to ensure the correct operation of the Huaibao. In addition, for complex adjustments or large windows and doors, it is advisable to seek professional installation services to ensure safety and quality.

Step 1: Determine the installation specifications of the hinge.

The hinge of the cabinet door is divided into straight bend, medium bend and large bend according to the cover relationship between the door panel and the side panel, which is also called full cover, half cover and no cover. When the cabinet door is fully covered with the side panels, use the full-cover hinged potato to open the hall; When the door covers half of the side panels, and the two doors share a side panel, use the half cover hinge; When the door is recessed with side panels, the door is flush with the side panels, and lidless hinges are used. Therefore, we need to determine which type of hinge to use according to the actual design situation.

Step 2: Determine the number of hinges to be installed.

How many hinges need to be installed on each cabinet door is also particular, if the installation is less, it will lead to insufficient bearing capacity and affect the service life; If there is more installation, it will be less convenient to adjust, and the cost will increase accordingly. So we need to consider it according to the actual situation of the cabinet door.

So we need to choose the number of hinges to install according to the height of the cabinet door. Take the commonly used Olleton damping hinges on the market, for example, two are installed at 900mm, three at 1600mm, four at 2000mm, and five at 2400mm.

Step 3: The hinge installation position is accurately hidden.

The hinge cup needs to use a drill bit with a diameter of 35mm to dig a cup hole with a depth of 12mm, pay attention to the margin of the cup hole to be left, when the thickness of the side plate is 16mm, the margin is left 3mm; When the thickness of the side plate is 18mm, the margin is left 4mm; If the thickness of the side plate is 20mm, the margin is left at 5mm.