The choice of tiles, how to see the quality of the tiles

1. Before buying ceramic tile products, you can ask the merchant to provide relevant test reports and certification certificates, and the products certified by authoritative institutions can keep a lot of bad products out of the door and choose the first pass.

2. Look at the flatness of the tile: the color of the tile should be uniform, the surface finish and flatness should be good, the surrounding rules should be complete, and the pattern should be complete.

3. Knock on the tile, and the sound is crisp, indicating that the porcelain density and hardness of the tile are high. Edition.

4. Look at the water absorption rate of the tile: the lower the water absorption rate, the higher the internal stability of the tile, and it is not easy to produce black spots and other problems in the space with high moisture content.

5. When purchasing, observe whether the surface is smooth at close range, and there are no defects such as lack of glaze, sand hole, and cracks. Take a step back two or three meters to see if the tiles will have color differences.

Extended Materials. 1. Ceramic tile, also known as tile is a kind of acid-alkali resistant porcelain or stone formed by the process of grinding, mixing, pressing, glazing and sintering of refractory metal oxides and semi-metal oxides, and is called ceramic tile or decorative material.

2. In ancient times, tiles were handmade, that is, each tile was hand-molded and hand-colored, so each tile was a unique work of art. Nowadays, all over the world, automated production technology is used, and human hands are only used to operate equipment. As in the past, ceramic tiles are used for decoration both indoors and outdoors.

How to distinguish the quality of tiles and how to choose.

How to choose tiles *** bad.

Ceramic tile is a commonly used ground decoration material in the process of new house decoration, not only has good wear resistance, but also looks very beautiful, so it is widely used in the bathroom, kitchen and living room of the ground repair, so how to choose ceramic tiles to see the worst? How to choose the color of floor tiles? Let's take a look!

First, how to choose tiles to see the worst.

When buying ceramic tiles, first of all, you should see whether the color of the front and back of the tile is uniform, and observe whether the particles of the tile cross-section are fine, the more delicate the particles, the better the waterproof effect of the tile, and then check the thickness of the tile glaze, the thicker the thickness of the tile glaze, the better the quality, you can also gently tap the tile surface with your hands, and the quality of the tile with crisp sound will be better.

Second, how to choose the color of floor tiles.

1. When choosing the color of floor tiles, mainly according to the style of home decoration, if the home decoration style is simple, you can choose tiles with simple texture and good surface gloss, such as full glazed tiles and polished tiles, as for the color needs to choose light colors, such as white, beige, etc.

2. If the decoration style of your home is European-style, you should not only pursue the luxurious and atmospheric decoration effect, but also need to have a touch of romance, and through exquisite details, the overall decoration effect looks more comfortable, so it is recommended that you should choose warm color floor tiles that imitate jade and marble when buying floor tiles.

3. Decorate the house into a pastoral family, in order to highlight the theme of natural freshness, when choosing floor tiles, you should give preference to light-colored floor tiles, and with some traces of aging, if it is a modern decoration style, you can choose medium gray floor tiles, highlighting the personality of modern decoration style.

Summary: How to choose tiles to see the bad related content is introduced here, when buying tiles, not only to consider the brand, but also to consider whether the quality of the tiles meets the standards, so that it will be more convenient to use. If you want to know more about decoration, you can pay attention to the relevant information of Qeeka Home.

1. Listen to the sound: tap the tile, listen to the sound is clear and pleasant, and identify the tile as the top grade. If the sound is muffled, it means that the tile may not be hard enough to break easily in the future.

2. Measuring angle: Generally, the tiles used in the home are quadrilateral, and you can measure whether the length of the four sides is equal, and then measure whether the length of the two diagonals is equal to see whether the specifications of the bricks are standard.

3. Weight: The greater the density of an object, the heavier it is. Tiles are the same, so you can compare two tiles of the same specification by weighing them, and weigh them by hand or weigh them, and the heavier one is relatively better.

It proves that the density of this brick is large, and the pottery powder is enough, so it is more durable.

4. Look at the style: look at the surface of the tile, whether it is smooth and whether there are bubbles and impurities; Second, look at the color difference, splice multiple tiles together to see if there is color difference; Third, look at the thickness, stack several bricks longitudinally together to see if the thickness is uniform.

5. Measure the water absorption rate: the water absorption degree of the floor tile determines the anti-fouling ability of the tile, and the lower the water absorption rate, the more resistant the tile is. Therefore, you can simply do the test, drip water on the back of the tile, if the water is quickly sucked in, it proves that the density of the tile is not high, not a good brick.

On the contrary, if the water enters the tile very slowly, it means that the quality of the tile is good.

Types of tiles.

1. Full-body bricks.

The surface of the whole brick is not glazed, and the material and color of the front and back are the same. The whole body brick is more wear-resistant, and the scope of application is widely used in halls, walkways, outdoor walkways and other venues. Generally rarely used on walls.

2. Glazed tiles.

Glazed bricks are glazed bricks on the surface, and the colors and patterns of glazed bricks are richer than those of polished tiles, and at the same time play a role in anti-fouling. However, due to the glazed tile surface is glazed, the wear resistance is not very good, according to the different gloss, it is divided into matte and bright two, and the scope of application is the kitchen in the bathroom, balcony, etc.

3. Polished tiles.

Polished bricks are bricks made by grinding and polishing the whole body. Compared to the roughness of the all-over brick, polished tiles are much smoother. This brick is very hard and very wear-resistant.

On the basis of the use of bleeding technology, a variety of Minghui imitation stone imitation wood effect can be produced. With the exception of the bathroom and kitchen, most of the other interior spaces can be used.

4. Vitrified bricks.

Vitrified bricks are made of quartz sand and clay in a certain proportion, and then polished to a shiny but no need to be polished. The surface is smooth and translucent, like a glass mirror, and it is the hardest type of tile. Vitrified bricks are better than ordinary glazed tiles, polished tiles and general marble in terms of water absorption, straightness of edge and open edges, bending strength, acid and alkali resistance, etc., but vitrified tiles are not perfect.

The disadvantage is that the pores are exposed after polishing, and it is easy to penetrate into dust and oil. Scope of applicationVitrified bricks are suitable for living rooms, bedrooms, walkways, etc.

5. Mosaic.

Mosaic is a type of brick with a special way of being. It is composed of dozens of small bricks to form a relatively large brick. Acid-resistant, alkali-resistant, wear-resistant, impermeable, pressure-resistant, and not easy to break.

The main materials are divided into ceramic, marble and glass. Because of its small size and bright colors, it is widely used in small indoor areas, walls, and outdoor walls and floors.

The house is delivered, and then the decoration is going to be put on the itinerary, decoration not only needs to pay attention to the design, decoration style, etc., for the decoration materials can not be sloppy, the main materials used in the decoration are ceramic tiles, water pipes, floors, latex paint, various plates, etc., but which kind of material, all require the quality to meet the standard, so you should pay attention to it when purchasing, so how to see the tile *** bad? Let's take a look with Qeeka Home experts.

First, how to see the tile *** bad.

The quality of ceramic tiles can be identified by the flatness of the tile surface, color, weight, sound, water absorption, etc., high-quality tiles are flat around and in the middle, which can be observed from the side, and can also be measured with quantifiers, and the surface color is uniform, there is no color difference, and the surface of the tile will also make a crisp and pleasant sound when hitting the tile surface by hand, if the sound is dull, it represents poor quality.

Second, what are the common tiles.

1. Full-body bricks.

Ceramic tiles are mainly divided into wall tiles and floor tiles, and the whole body brick is a kind of floor tile, has always been called anti-slip bricks, in the kitchen, bathroom, corridor and other ground is more commonly used, the front and back of the brick material, color are consistent, the surface is not glazed, there is a very good anti-slip, wear-resistant function.

2. Antique bricks.

Antique brick is a kind of glazed brick, is a derivative product of color glazed brick, antique brick is different from other glazed bricks in the color performance, antique brick has a very unique decorative performance, in the living room ground, kitchen, bedroom, balcony and other areas used more.

3. Mosaic.

Mosaic is called ceramic mosaic tile, belongs to special ceramic tiles, its size and specifications are small, generally composed of a lot of small tiles to form a large brick, the pattern is rich, the decorative effect is good, and there is a good acid and alkali resistance, no water seepage, pressure resistance and other properties, usually used in indoor and outdoor walls, bathrooms.

Summary: The above is an introduction to how to see the bad tiles, I hope the content shared can give you some reference, if you want to know more about relevant knowledge, you can **** Qijia Network to consult.

First, look at the appearance. The color of the tile should be uniform, the surface finish and flatness should be good, the surrounding rules should be regular, the pattern is complete, and four or five pieces should be extracted from a box to see if there are defects such as color difference, deformation, lack of edges and corners. 2. Listen to the sound.

Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality. You can also use the thumb, index finger and middle finger of the left hand to clip the corner of the tile, hang down easily, and tap the middle and lower part of the tile with the index finger of the right hand. 3. Drip test.

You can drop water on the back of the tile to see how fast the water soaks after it spreads, generally speaking, the slower the water absorption, the greater the density of the tile; On the contrary, the faster the water absorption, the sparse density, and its intrinsic quality is superior. Fourth, the measurement. The higher the accuracy of the side length of the tile, the better the effect after paving, and buying high-quality tiles is not only easy to construct, but also can save man-hours and accessories.

Use a tape measure to measure whether there is a difference in the size of each tile, and the high accuracy is the top grade. In addition, observe its hardness, ceramic tiles with good hardness, strong toughness, not easy to break and rot as the top quality. The edges and corners of the tile fragments are scratched on each other, and the broken fragments are inspected to see whether the broken parts are fine or loose, whether they are hard, brittle or soft, whether they leave scratches, or scattered powder.

Whether the size is standard is the key to judging the quality of the tile, measure the diagonal and quadrilateral size and thickness of the tile with a tape measure or caliper, whether the thickness is uniform, good tile, the sound is brittle, indicating that the porcelain content is high. If the sound is "clicking" with the sound of stubble, it means that there are cracks hidden in the brick. Good tiles, the master installation is also convenient for construction, and the effect of installation is also standardized.

When decorating the house, many friends will choose to install tiles in the bathroom, kitchen, living room and other spaces, which is not only beautiful, but also easy to take care of. Let's learn together.

1. Look at the water absorption.

When buying ceramic tiles, you should judge the quality of tiles from the water absorption of tiles, because the water absorption of tiles can reflect the hardness of tiles and the quality of ceramic tiles. We can pour water on top of the tiles and observe the water penetration. If you buy a polished tile, the water is immediately sucked into the tile, then it means that the tile is an inferior product, if the water does not penetrate into it immediately, it means that the tile is a high-quality product.

2. Detect flatness.

When buying tiles, you should check whether the surrounding sides of the tiles are flat. If the flatness of the tile is very poor, then after being paved on the ground or wall, the tile will be warped and uneven, so it is necessary to pry the original tile open and replace it with a new tile, which is not only a waste of time, but also a waste of money.

3. Test the slip resistance.

When buying ceramic tiles, you must understand the slip resistance of ceramic tiles. If the slip resistance of the tile is very poor, then it is easy for people to fall. Especially in the family with the elderly or children, it is not possible to pave tiles with poor slip resistance.

We can get some water on top of the tiles and then walk on the tiles to see if it's easy to fall.

4. Look at the stain resistance.

When buying ceramic tiles, you must understand whether the stain resistance of the tiles is good. If the tile is not stain resistant, it will be difficult to clean, which will increase the daily cleaning time and will also affect the aesthetics of the tile. We can write some words on the tile, and then see if we can clean it up, if there will be some ink stains left, then it means that the stain resistance of the tile is very poor, it is recommended that it is best not to buy this kind of tile.

The above is a detailed introduction to how to distinguish the bad tiles with you, and I hope to provide some help to friends in need. When choosing ceramic tiles, you must shop around, and it is best to choose to buy regular, large, and well-known ceramic tile brands.

<> "Kind of identification of the *** bad of the tile.

1. Look. Looking at the appearance, the simple way is to see whether it is flat and neat, whether there are bubbles and impurities on the surface, how the corner division process is, whether it is twisted, warped and defective, etc. Najan.

Looking at the color, the color of the tile can see whether the firing temperature is uniform and how the technical device is. Usually the gloss of ceramic tiles of brand manufacturers is better than that of ordinary manufacturers.

Look at the color difference, put several tiles together, pay attention to see if the color difference is obvious, there is no color difference.

Look at the thickness, stack several bricks vertically together, and check whether the thickness is uniform from the side.

2. Listen. Grab one of the corners of the tile with the left hand, let it hang down naturally, and hit the lower middle and lower position of the tile with the index finger of the right hand. If the sound is dull and the sound of being empty is made, it means that the proportion of the material is not right, or the firing heat is not well controlled, the porcelain performance is insufficient, the hardness of such tiles is insufficient, and it is easy to break, so it is not recommended to buy.

3. Knock. It is the weight, the same specification and type of tile, the handle is large, usually better. That kind of ceramic tile has a sufficient amount of ceramic powder, high density, and is very strong.

4. Dripping. Put a few drops of tap water on the back of the brick and see how well it absorbs. If the water absorption is fast, it means that the density of the tile is insufficient, the quality is ordinary, and the tile is not suitable for use in the kitchen, bathroom and other places with heavy moisture.

On the contrary, the slower water absorption means that the density of the tile is higher, and the quality of the tile is better.