The back cover of the watch fell down, and it was always loose when it was put back on

Generally speaking, the back case of the domestic low-cost quartz watch is press-in, and a certain amount of pressure is required for assembly, and the press-in watch may need to replace the waterproof ring after opening the back cover. If you don't pay much attention to the watch and it is not expensive, you can deal with it yourself, that is, put the back of the watch case in place and force the buckle in place, you may need special tools, be careful not to hurt the crystal part. It's really not for you to find a watch repairer and let him deal with it, you can't charge much money, ten yuan is a lot...

Loose back cover: Adjust the position of the lid, such as which direction the notch is facing, and don't buckle the wrong position.

Turn the lid down with the front of the watch facing up.

Balance the gaps on each side of the lid and keep them basically the same in all directions.

Place the table back cover on a rigid tabletop.

Put a soft cloth on the inner glass of the watch, and press down with the palm of your hand to press it evenly, and be careful to hurt your hands in the process.

If you don't know how to do it, it is recommended to go to a professional watch repair technician to deal with it, so that it will not hurt your hands, and the watch can be as perfect as ever.

The watch is broken, and the back cover has been taken off, in fact, there is no problem, although the hands are not gone, but they can also be repaired, it is recommended that you go to some professional business second, or a professional place to repair the watch to repair it.

In fact, this is a very simple thing, as long as you do it yourself, many people seem to love the format of the watch very much, in fact, he did not make any movements, so you should try to put this is a if the watch is put away, then of course it is better, in fact, to some professional departments to repair, it is obvious that the success rate will be higher, which should be noted.

1.Take it directly to the store for repair There is no problem with the outside of the watch, but the watch just doesn't go, you can take it to a professional repair shop, and let the staff inside help you repair it, generally they can tell you more accurately the damaged layer and the way to repair.

2.Replace the mirror If it is caused by the damage of the mirror, you must replace the mirror first, and clean up the internal debris by the way. This method can directly get the watch.

3.Winding up Generally speaking, there is a very common factor for mechanical watches not to go, and that is lack of power. Usually everyone just needs to pass.

If the watch stops due to a collision, it is likely that the internal movement or pinion will be rubbed and it will not function properly. As a result, the watch will not be able to move.

Because the parts inside the watch are very small and very precise. After falling, the pointer does not go, this one must be taken to the repair master ** to repair, individuals must not think about dismantling, because once disassembled, it cannot be installed.

Hello, judging from your description, the watch fell more seriously, and it is recommended that you apply for after-sales maintenance directly. If this kind of man-made damage is made, you may have to pay a large part of the money.

If the ** of the watch you buy is relatively expensive, you can get it to the after-sales service to repair, if it is a watch for dozens of dollars and hundreds of dollars, there is no need to buy another one.

After the watch falls, don't try to repair it yourself, we don't understand anything, it will only get worse and worse, just find a professional watch repair master to repair it.

After the watch was broken, the back case took off the hands and did not go, which is most likely due to the broken gear inside. In this case, the watch needs to be disassembled for further repair, so it is necessary to go to a professional watch shop for repair.

You can take it to a professional repair shop and let the staff inside help you repair it, and they can generally tell you more accurately the damaged layer and the way to repair it.

If the watch falls to the ground, there is a problem with the stabilizer inside the watch, so that the hands are not gone, so it is recommended to go to a watch repair shop in the mall to repair it.

The watch falls, the rear case comes off, and the hands do not go, so you have to get the after-sales maintenance in time and let the maintenance staff help you repair the watch, so don't worry.

There is nothing wrong with the outside of the watch, but if the watch just doesn't go, it is recommended that you bring the watch to the after-sales center to detect the specific cause of the failure, so as to avoid your normal use.

Hello, in this case, go to the watch shop and ask them to help repair it, if the watch is more expensive, then go to the repair shop or go to the specialty store to have a look.

After the finger watch falls, the case is off, the hands do not go, you can only go to a regular watch store to repair it, see if there is any value of repair, if not, you can change a new watch.

Take it to the repair office, let the repairer do an appraisal first, if there is value to repair, repair, if there is no value to repair, send it to the repairer as accessories.

If the watch is broken, the watch can be taken off, and the hands do not go, it is recommended that you send the watch back to the after-sales service for repair.

The watch was violently vibrate, resulting in the movement parts inside may have fallen off, and the watch needs to be tested and repaired after sale.

After the watch is dropped, if some of the small parts inside are not broken, you can go to the kind of watch repairer to give it a try.

Go to repair, you can't repair it, it's not expensive, just buy a new watch.

If you have a broken watch, you can go to a specialized watch repair shop to repair it.

If it doesn't work, buy another one.

There is no problem with the outside of the watch, but the watch just doesn't go, you can take it to a professional repair shop, let the staff inside help you repair it, generally they can tell you more accurately the damaged layer and the way to repair.

For this kind of watch falls, the rear case falls off, and the hands do not go, it is recommended to go to a watch repair shop or after-sales service to repair.

If the watch falls, the case comes off after the case, and the hands don't go, you can check it up and down to see how to repair it, or ask customer service.

Summary. A drop on the lid of a quartz watch may cause the following hazards to the watch:Damaged appearance:

A drop on the watch cover may cause surface defects such as breakage or scratches on the watch cover, which can affect the appearance of the watch. Affect water resistance: The cover serves as the watertight protection of the watch, and once it is dropped or damaged, it may cause water or moisture erosion of the internal parts of the watch, which will affect the normal operation of the watch.

Contamination of the movement: A drop of the cover may also cause dust, sand and other substances to enter the inside of the watch movement, causing the movement to run poorly or be damaged. Therefore, if the watch cover is dropped, it is recommended to find a professional watch repair organization for overhaul and repair in time.

At the same time, when wearing the watch at ordinary times, you should also pay attention to protect the watch and try to avoid collisions and heavy objects pressing on the watch.

A drop on the cover of a quartz watch may cause the following hazards to the watch: Damaged appearance: A drop on the watch cover may cause surface defects such as damage to the cover or scratches on the watch, which may affect the appearance of the watch.

Affect the waterproof performance: As the watertight protection of the watch, once it is dropped or damaged, it may cause water or moisture infiltration of the internal parts of the watch, which will affect the normal operation of the watch. Contaminated movement:

A drop on the cover can also cause dust, sand and other substances to enter the watch movement, causing the movement to malfunction or be damaged. Therefore, if the watch cover is lost, it is recommended to find a professional watch repair machine for repair and repair in time. At the same time, when wearing the watch at ordinary times, you should also pay attention to protect the watch and try to avoid collisions and heavy objects pressing on the watch.

Fellow, I really didn't understand, I can be more specific.

When the quartz cover of the watch falls off, it will have the following specific effects on the watch:1Damaged Appearance:

The cover of the watch is the part that is directly exposed, and its main function is to protect the movement of the watch from external forces and dust, and also plays a role in protecting the watertightness of the watch. If the cover is dropped, it will cause surface defects such as damage and scratches on the cover, which will affect the appearance of the watch and reduce its overall value. 2.

Affect water resistance: The waterproof design used in watches varies, but the case cover, as a key part of the watch, usually has some water resistance. When the watch cover is knocked off, the movement inside the watch is exposed, and if moisture enters in this case, it may cause damage to the internal parts of the watch or stop functioning due to moisture, and in severe cases, the watch may be scrapped.

3.Contamination of the movement: The fall of the watch cover may also cause dust, sand and other substances to enter the watch movement from the outside, which will affect the operation of the movement itself, resulting in poor operation of the watch, or complete damage to the watch movement.

Therefore, if the watch cover is dropped, it is recommended to find a professional watch repair agency for repair and repair in time. At the same time, when wearing the watch at ordinary times, you should also pay attention to protect the watch to avoid collisions and heavy objects pressing on the watch.

Summary. If the cover of a quartz watch is dropped, it will cause damage to the internal structure of the dial and movement, affect the normal operation of the watch, and may even cause damage to the internal structure of the dial and movement, thereby affecting the normal use of the watch.

The fall off the cover of a quartz watch will cause damage to the internal structure of the dial and movement, affect the normal operation of the watch, and may even lead to damage to the internal structure of the dial and movement, thereby affecting the normal use of the watch.

Can you tell us more about that?

If the cover of a quartz watch is dropped, it may cause damage to the internal structure of the dial and movement, affecting the normal use of the watch. Reasons:1

The cover is not hard enough and can be easily damaged if it is dropped. 2.The cover is not properly fitted by the tartar and is easily damaged if it is dropped.

Workaround:1Replace the cover with a harder material to prevent damage if dropped.

2.Install the cover correctly to prevent damage if dropped. Personal Tips:

1.When using the watch, care should be taken to protect the cover from damage. 2.

When installing the table cover, care should be taken to install it correctly to avoid damage. Related knowledge: The watch cover is an important part of the watch, which can protect the internal structure of the dial and the core of the machine, so that the watch can be used normally.

Therefore, when using and installing the cover, care should be taken to protect the cover from damage.

The mechanical watch fell to see the entire watch body and the part of the watch glass, as well as whether the mechanical watch is inaccurate or stopped, if the above side hunger skin surface is no problem, it means that there is no problem with the mechanical watch that has fallen.

There are many mechanical watches that are anti-drop or have shock absorption functions, so it doesn't matter, but if there is a problem, you must find a more professional master in time to determine the fault and repair it appropriately.

There are a lot of movement parts of mechanical watches, and they are very precise, if you fall a little, there can be a number of Tong can stop or go inaccurately, at this time it is best not to solve the problem of the watch yourself. Because the parts in a mechanical watch are very small, they may bump together due to a fall.

It is also possible that the movement gears are misaligned, subjected to magnetic force, etc., and if the mechanical watch is not worn for a long time, it will also stop, and there may be a problem of sludge drying out, that is, insufficient power.

If it is a lack of power, you can just rewind the watch, if it is a problem in a mechanical watch, then it is best not to make adjustments yourself, you should go to a more professional repair shop to adjust.

The back cover of the watch is used to seal the internal parts of the watch, and in general we do not recommend opening it without permission. But how do we turn it on when it comes to changing the battery or cleaning it? And then how to install the back cover correctly? Take a look at the introduction of the Home of Watches.

The back cover of the watch is removed.

After opening the cover hungry lead is, we recommend using a special watch opening tool, spiral waterproof watch. It has threads on the upper case and back cover, and the upper case and back cover are tightly screwed together by the action of threads. The surface glass is rotten and easy to roll into with a tool, which is relatively tight.

Waterproof gaskets are placed in the shank and where the back cover and upper shell are screwed together, so it can play a certain role in waterproofing.

There are many ways to open and close the back cover of the watch, but the back cover of the screw buckle and the back cover are the most, followed by a few screws to tighten the back cover, for the back cover of the watch, as long as we can open it through some basic tools, as long as it is pressed tightly when restoring, it is the simplest in terms of disassembly.

If there are conditions, you should also try your best to use professional watch opening tools, there is a watch opener roughly similar to a vice, as long as the watch rack on the wrist, the knife edge of the watch opener is aimed at the back cover of the watch opening, as long as you have a good grasp of the strength of the watch can easily open the back cover of the watch.

The back cover of a pressurized waterproof watch is more special, and the upper shell of its case is pressed against the case back. There is a higher wall around, the movement is installed in the wall of the back cover, the watch glass is directly mounted on the back cover wall, and after the upper shell is pressed in, the watch glass and the back cover are tightly covered, so as to play the role of sealing and waterproofing.

The back cover of the watch is removed and installed.

It is easy to have problems when installing the watch, and it is often encountered that the back cover of the watch cannot be buckled, and all attempts have ended in failure. Here's how to install it correctly!

Place the table back cover on a rigid tabletop. Place a soft cloth on the front glass of the watch and press down with the palm of your hand to apply even pressure. Adjust the position of the lid, such as which direction the notch is facing, and don't mess with the wrong position.

Turn the lid down with the front of the watch facing up. Balance the gaps on each side of the lid and keep them basically the same in all directions. In this way, the back cover of the watch was successfully replaced.