Why does my computer keep restarting automatically, and after restarting, it says that it is recover

How to solve the problem of automatic computer restart? Computer automatic restart, shutdown and other abnormal phenomena are more common, but this is only the appearance of the failure, caused by the computer restart of the internal and external causes of a lot of travel training, the principle of treatment is: first easy and then difficult, first soft and then hard, the following I will share with you the specific treatment methods, I hope to help you

Three: Find the application of "Master Lu" and light it up, and add this application.

Four: Open the use of "Master Lu".

Five: Check the temperature in the computer status on the right, if there is a red display, then we can basically determine that it is because of the heat dissipation problem, so the computer is abnormally shut down or automatically restarted, change the computer with a radiator, or blow with a fan.

Why does my computer shut down abnormally?

Some software with tasks will have the option to shut down automatically, which may have been accidentally set by the user. These software are more common, such as Thunderbolt, Express, anti-virus software, BT**, **** and so on. In the software settings, there is an action that automatically shuts down after completing a certain task.

Below, let's take a look at the reasons and solutions for the abnormal shutdown and automatic restart of the computer.

Step 1: Turn off the setting of automatic computer restart when system error occurs, right-click "My Computer" - select "Properties" - select the "Advanced" tab in the pop-up "System Properties" dialog box - > click "Settings" in the lower right corner of the "Startup and Failback" item below - in the pop-up "Startup and Failback" dialog box, remove the check in front of "Auto Restart" - > click "OK" to exit.

Step 2: Click on the "Start" menu - > select "Run" - type "regedit" to open the registry - > the [hkey local machine software microsoft window nt currentversion winlgon] project in order, and find the "powerdownaftershutdown" subkey on the right side of the winlgon project - Right-click and select "Modify" - change the value to "1" - > if you don't find the "PowerdownAfterShutdown" sub-project, you can right-click to create a new "PowerDownAfterShutdown" project and set its data value to "1".

Step 3: Open "Network Neighbors" - right-click "Local Connection" and select "Properties" - click "Configuration (C)" in the upper part of the "General" tab - select "Power Management" - tick "Allow the computer to turn off this device to save power", remove the check mark in front of "Allow this device to take the computer out of standby" - > click "OK" to exit.

If following the above three steps still can't solve the problem of automatic restart after shutdown and automatic restart of computer shutdown, you can focus on checking whether the CPU, graphics card, motherboard, and memory inside the case are too hot, because it may occupy some resources during shutdown and cause the hardware to heat up, once the temperature exceeds the protection limit, the computer will automatically restart, that is to say, the computer will automatically restart if it is not completely shut down; At the same time, you should also cooperate with 360, Kingsoft and other anti-virus software to conduct a comprehensive scan of the system to eliminate the problem of automatic restart after shutdown and automatic restart of computer shutdown caused by virus infection.

Summary:

The problem of automatic restart after shutdown and automatic restart after computer shutdown is more common, the above methods can only be used for the problem of general setting error or virus and Trojan infection, if the above methods still cannot solve the problem of automatic restart after shutdown and automatic restart of computer shutdown, please check the BIOS settings.

Whether you are a laptop or a desktop, sometimes there is a problem with the power button can also cause this situation, and there is also whether you choose to restart the system when you shut it down?

1.To set up automatic computer restart, right-click on "My Computer" - select "Properties".

2.In the "System Properties" dialog box, select the "Advanced" tab, click "Settings" in the lower right corner of the "Startup and Failback" item below - in the pop-up "Startup and Failback" dialog box, 3, uncheck the box in front of "Auto Restart" - > click "OK" to exit;

1Start Run Enter: msconfig OK System Utility Configurator Advanced Check "Disable Fast Shutdown" Restart your computer. If it doesn't work out yet, see if there's a driver or hardware error.

No more access to the BIOS or even the power option, or reinstall the system.

There are several reasons for this: the temperature is too high; Solution: Look at the rotation of the cup fan, and replace it with a new one; If there is a lot of dust, it must be removed.

Dust! 2.Intrinsic job instability; Solution: Erase the gold finger with an eraser and reinstall it;

3.Poor power contact: Solution: Unplug the power supply to see if the plug and socket can be tightly connected.

Beyond what the CPU can bear, the system will restart, it is recommended not to open too many programs, as if tripping, the reason is the same.

Eliminate them one by one by yourself through the "elimination method".

1. Hardware incompatibility;

2. The application program is not compatible with the hardware;

3. Hardware damage or looseness;

4. Install a mismatched hardware driver;

5. The power supply is unstable or the current does not meet the requirements of the motherboard;

6. The BIOS is set incorrectly;

7. The external device is not compatible with the current version of the operating system;

8. Mistakenly deleted a certain "registry" information of the operating system;

9. Overclocking graphics cards, monitors, motherboards, etc.;

10. Connecting too many external devices;

11. The auxiliary attributes of the operating system cannot be loaded;

12. Use multiple anti-virus software;

13. Caused by viruses (the probability is very low);

14. There are too many hard disk fragments (especially C drive);

15. The column is damaged;

16. There is a conflict in installing multiple operating systems;

17. The CPU fan does not rotate or rotates very slowly, resulting in high CPU temperature;

18. Computer dust, affecting heat dissipation. ......

Hardware failure, it may be a loose memory slot, or a power supply failure that cannot continue to power supply.

Is it happening to install or uninstall the soft type? It could be an issue with the explorer restart.