Why do I keep disconnecting when I m online?

Because your network cable is not good.

Dear I am happy to answer for you: What is going on with frequent network disconnection Answer: Dear, there are several reasons why the router is always disconnected:

1.Poor Driver Compatibility of the Router If the driver compatibility is too poor, then network outages will occur frequently. Normally, after the router has been used for a period of time, the phenomenon of network disconnection will become more and more intense.

The main reason for the network disconnection is that the wireless network card driver function of the computer system is too poor, or the version is too low. 2.Network Poisoning The computer in the local area network is infected with a virus, and a large number of viruses quickly replicate and spread data, causing the router to run out of resources and then crash.

This situation can only be solved by antivirus software, and the router does not currently have the function of checking and killing viruses. 3.The router is overloaded (1) The amount of belt is too large, which exceeds the processing capacity of the router, causing the router to crash.

Therefore, when buying a router, you need to know whether its maximum belt capacity is consistent with your actual application. (2) The computer in the LAN is transmitting large amounts of data, such as the common P2P software such as fast broadcasting, which can slow down the network speed in a short period of time, exhaust the router resources, and cause the computer to be disconnected. In this case, you can set QoS in the JCG router, and the IP rate limit and connection limit can be used to solve the problem of disconnection caused by P2P software.

4.The most common reason for a router network outage is that the wireless signal is unstable due to excessive signal attenuation. Since the wireless router uses the wireless microwave frequency band, the biggest feature of microwave is that it propagates in a nearly straight line and has a very weak diffraction ability, so the obstruction on each propagation line will attenuate the wireless signal.

5.Wireless signal co-channel interference Now there are a large number of devices in life that are also in the same frequency band as the router, such as microwave ovens, wireless**, Bluetooth mobile phones, wireless mice, wireless speakers, etc., which will cause same-band interference to wireless routers. 6.

Heat dissipation issues The heat dissipation of a router has a direct impact on the quality of the Internet, especially in the summer. Poor heat dissipation can cause the router to work slower and less efficient, resulting in frequent disconnections. I hope it will be useful to you and I wish you a happy life!

1. Poor contact of network lines: First, check whether the network lines have poor contact, and it is recommended to re-plug the network cable, or replace the network cable to try it. Sometimes, the network cable will be damaged by mice, which will cause the network to automatically drop.

2. Need to reset the network: search for the command prompt, then right-click to run as administrator, then enter netshwinsockreset, press enter, wait for the command to complete, and then restart the computer according to the above prompts.

3. The NIC driver is unstable: Sometimes the NIC driver is unstable, which will cause the network to disconnect from time to time. It is recommended to uninstall the NIC driver and reinstall it using the Driver Genie NIC version, or go to the official website of the motherboard to install the appropriate NIC driver.

The computer is always automatically disconnected from the network, hello, first, the computer itself is a problem, the network card problem, the driver is off, or the network cable problem, the router and so on can not be connected to the Internet, one by one. Second, the packet is lost, there may be a problem with the crystal head, redo the crystal head. 3. DHCP is not enabled for routing, IP cannot be obtained, the network is restricted, or someone in the same network uses an executive officer to cause interference.

Fourth, the network speed is slow, it may be poisoned, or someone in the same network is seriously occupying resources, such as BT, **, etc. 5. If you cannot access the Internet due to system damage, please reinstall or restore the system. 6. After connecting to the Internet, you just can't open the web page, there may be a problem with the network signal, please contact the local broadband access department to check.

7. Router, if the cat is overheated, please turn off the power for 15 minutes and then turn it back on. Hope my answer is helpful to you, <>

Summary. 1. The easiest way to deal with network problems is to restart, restart the router and computer, or reseat the network cable, disconnect the wifi and reconnect, etc., and implement the simplest method first. Second, the network driver problem is sometimes caused by the driver, you can try to update the network driver to solve this problem.

How to do it: Right-click the Start Menu icon, select Device Manager, find the Network Adapter drop-down, right-click Network Driver, and then select Update Driver.

1. The easiest way to deal with network problems is to restart, restart the router and computer, or reseat the network cable, disconnect the wifi and reconnect, etc., and implement the simplest method first. Second, the network cavity driver problem is sometimes caused by driver reasons, you can try to update the network driver to solve this problem. How it works:

Right-click the Start Menu icon, select Device Manager, find the Network Adapter drop-down, right-click Network Driver, and then select Update Driver.

Excuse me, but please go into more detail?

If the above methods still don't work, you can try this ultimate solution is still the same in the setting of the Vacancy Judgment Standby Manager to open the network driver, then right-click to select the driver, click on the properties and then in the advanced, we find the connection speed and duplex mode in the value on the right and select 100mps half-duplex, click OK Fukai, and then the network will be automatically restarted. To sum up, if you encounter frequent restarts of the computer network, you can try the above methods to solve it, if you really can't solve it, contact local professionals to repair it.

.There is a problem with the DNS of the network connection. Open the local network connection, check whether the connection status is normal, whether the sent and received packets are normal, if the sent and received packets are 0, then open the "Local Connection Properties" window, check whether the DNS and gateway are correct, it is best to ping the gateway and DNS to see if it can be pinged, if not, you can try a different DNS.

2.Infection with the virus. Nowadays, many viruses can cause the phenomenon of a normal network connection but no Internet access. This situation is often manifested in the opening of IE, in the lower left box of the IE interface, the web page is being opened, but there is no response for a long time.

There are many reasons why your computer can't access the Internet, and this article is just one example! If the problem is not solved with antivirus software, then you need to remove the virus manually. View the process in the Task Manager.

If the CPU usage of an unfamiliar process is as high as 90% or more, then be sure to end it. If it can't be finished, you should start into safe mode and delete the program, and delete all items related to the program from the registry.

This kind of problem is multifaceted, mainly because the router is too hot to work for a long time, it is best to get a small fan fan, and you can also use it, if you feel more troublesome, Jianyi will change to a new router.