Huawei phones have a feature that requires two fingers to swipe the screen, how to turn it off?

This mode is a blind mode, and the operation method in this mode is as follows: if you unlock it on the lock screen, you need to keep swiping with two fingers to unlock it; Swiping the table and list are both operated by swiping with two fingers; When you select a selection, you need to double-click to complete it.

The shutdown operation is as follows: Settings > Accessibility > Talkback switches are turned off.

1. Slide two fingers to the desktop where "Settings" is located, and tap "Settings" twice.

2. After entering "Settings", slide down with two fingers, find "Smart Assistance" and double-click to enter.

3. After entering the intelligent assistance page, click on the smart screen.

4. After entering the smart screen page, turn off the smart screen to turn off two fingers to swipe the screen function.

This is a phenomenon caused by the user turning on blind mode, which is required to turn off blind mode.

The switch can be turned off (note that the prompt box can be popped up by double-clicking, and double-clicking to confirm that it is closed).

If you unlock it on the lock screen, you need to keep swiping with two fingers to unlock it.

Swiping the desktop and list is done by swiping with two fingers, and you need to double-click to select a selection.

Problems with the film. Let's repost it.

Problems with the film. Let's repost it.

At the top of the screen, you can slide two fingers and point the number with two fingers, how to turn this off.

Summary. First open the settings option on the desktop of the mobile phone, click the system and update function on the settings page, then open the system navigation mode at the bottom of the system and update page, then click the floating navigation, and finally slide the button on the floating navigation page to turn off the floating navigation, then you can successfully close the floating dots.

First of all, open the first round option on the mobile phone desktop, click on the system and update function on the settings page, then open the system navigation mode at the bottom of the system and update page, and then click on the floating navigation, and slide the button on the floating navigation page to turn off the floating navigation after the most dismantling, and then you can successfully close the floating dot.

Not a floating window.

What does that look like?,Can you take a screenshot and see.。

This little bit. It will appear when the screen is touched.

It's always been there. How do you turn it off?

Wait a minute, dear, I'll help you take a look.

Developer options, find Show touch operation, turn off Search for "hovering ball" in the settings.

This is the pro from the levitation ball.

Follow your fingers as they move.

You can also try the one above and turn off the hover navigation.

You're a hovering navigation pro.

Summary. 1. Find "Settings" on the home screen of your OPPO phone and tap to enter.

2. In the general list of "Settings", click to enter "About This Mac".

3. In "About This Mac", open "Version Number Options", and by tapping it continuously, you can open "Developer Options" for your OPPO phone. If it is currently opened, it will be displayed at the bottom of the message.

5. Click the switch on the right side of "Developer Options" to turn it on.

6. Find the "Show Touch Operation" column in the list, and click the switch to turn on the right side of it.

7. After that, as long as the finger has a sliding operation on the screen, a small white dot will be displayed to show the trajectory of the current operation.

How to cancel the small dot on the screen of Huawei mobile phone that slides with your finger.

Hello! I am a friend of Youyin Jujube who will solve your doubts this time, please wait a little while, I am sorting out the answer case! Thank you! ☺️

Hello! The small dot on the screen of Huawei mobile phones can be canceled through the Control Center, or by going to the system navigation mode in System & Updates.

I'm sorry. The operation steps are as follows: 1. Swipe down from the top of the cultivating, let the ants open the control center, and click the "Suspension Navigation" option to cancel directly; 2. Click the "Settings" option to enter the settings page, and then click the "System and Update" option in the page to enter the system and update page; 3. Click the "System Navigation Mode" option in the system and update page to come to the system navigation mode page; 4. Click "Suspension Navigation" to enter the suspension navigation page, and then click the small circle on the right side of "Suspension Navigation" to close.

It's an OPPO phone.

The steps are pretty much the same.

It's not Huawei, it's OPPO

I don't think so.

1. Find "Settings" on the home screen of your OPPO phone and tap to enter. 2. In the general list of "Settings", click to enter "About this machine". 3. In "About this machine", open "Version number options", and click it to open "Developer options" for OPPO phones.

If it is currently opened, it will be displayed at the bottom of the message. 4. After opening "Developer Options", open the "More" list option in the "General" column of the "Settings" option, and click "Developer Options". 5. Click the switch on the right side of "Developer Options" to turn it on.

6. Find the "Show Touch Operation" column in the list, and click the switch to turn on the right side of it. 7. After that, as long as the finger has a sliding operation on the screen, a small white dot will be displayed to show the trajectory of the current operation.

<> this one is fine.

This is a humanized design in Huawei, but this function needs to be turned on by the user, and this mode is calledBlind mode, so you need to turn off blind mode:

1. Settings->Accessibility->Talkback switch can be turned off(Note that double-click to pop up the prompt box, double-click to close);

The operation mode of the Zen body of the Gucha people: If you unlock it on the lock screen, you need to keep swiping with two fingers to unlock Suizhou; Swiping the table and list are both operated by swiping with two fingers; When you select a selection, you need to double-click to complete it.

With the above method, we can turn on the double-click mode.

Huawei: Huawei Technologies **** was officially incorporated in 1987 in Shenzhen, China. Huawei Technologies **** is a private communication technology company that produces and sells communication equipment, headquartered in the Huawei base in Bantian, Longgang District, Shenzhen, Guangdong Province, China.

Huawei's products mainly involve switching networks, transmission networks, wireless and wired fixed access networks, data communication networks, and wireless terminal products in communication networks, providing hardware equipment, software, services, and solutions for communications operators and professional network owners around the world.

Summary. Hello, method.

1. As shown in the figure below, there is a small dot that can be dragged on the Huawei phone.

2. This small dot can be canceled and turned off, click Settings.

3. Go to Settings and click System.

4. Enter the system and click on the system navigation mode.

5. Scroll down the page and click on the last floating navigation.

6. Jump to the page and turn off the button behind the floating navigation.

7. After the button of floating navigation is turned off, the small dot will not be displayed on the desktop of the mobile phone.

How to cancel the small dot on the screen of Huawei mobile phone that slides with your finger.

1. Click Settings. Go to the phone page and click on Desktop Settings.

Click on System to go to Settings, click on System & Update.

Tap Developer Options, tap Developer Options, tap Show touch actions.

Clicking the close button will show that the touch operation can be turned off.

Didn't find developer options.

There is no developer option on the phone How to find it?

System updates. Click in.

Hello, method 1, as shown in the figure below, there is a small dot that can be dragged on the Huawei mobile phone. 2. This small dot can be canceled and turned off, click Settings. 3. Go to Settings and click System.

4. Enter the system and click on the system navigation mode. 5. Scroll down the page and click on the last floating navigation. 6. Jump to the page and turn off the button behind the floating navigation.

7. After the button of the floating navigation is turned off, the mobile phone desktop will not show the small dots.

Summary. Method Steps:

1.Open your phone's settings.

2.Swipe the interface and tap to open accessibility.

3.Click to enter the Quick Start & Gesture options.

4.Tap the air gesture at the bottom.

How to cancel the small dot on the screen of Huawei mobile phone that slides with your finger.

Method Steps:1Open your phone's settings. 2.Swipe the interface to click on the Tongxian search wheel to change the auxiliary function. 3.Click to enter the Quick Start and Gesture options. 4.Tap the air gesture at the bottom.

Honor mobile phone turns off system navigation, and there are small round white dots.

Although the floating navigation button on the mobile phone screen is very convenient, it is often encountered when you click on the screen, which affects the user experience. 2. Under the settings menu, click to enter [Xixiang System and Update]. 3. Click on the system page to enter the [System Navigation Method].

4. Click [Suspension Navigation] to turn on, and turn off the button on the side of the right stool.

The method of turning off the lock screen and swiping up on the Huawei mobile phone can be achieved by following the following steps: Method Step 1 5 Read step by step on the mobile phone table loss and acceptance surface, click the set pin icon to enter. 2 5 Enter the menu of setting the tent divination list, and click on the biometrics and password option to enter.

3 5 In the Biometrics & Password interface, click on the Face Recognition option to enter. 4 5 Enter the face recognition settings interface and click the unlock screen option to enter. 5 5Finally, in the pop-up unlock screen dialog box, you can directly check the direct unlock option.

The touch screen of Huawei mobile phones can only be swiped with two fingers, what's going on?

The touch screen of Huawei mobile phones can only be swiped with two fingers, what's going on? 1. If you use the ambient temperature of the mobile phone is too low, the touch screen may not be sensitive, which is affected by the physical characteristics of the screen device itself, it is recommended that you try to keep the mobile phone at an ambient temperature of 0 -35. 2. Press and hold the Power button for more than 10 seconds to force restart your phone, if the problem persists, you are advised to bring the relevant purchase voucher to the Huawei Customer Service Center for testing.

In the EMUI version, you can force restart your phone by pressing and holding the volume down button and the power button at the same time for more than 10 seconds. 2. Follow the steps below to check whether the screen of your device is normalOpen the My Huawei Service app on your phone and find the service> I want to detect > screen > The screen is not sensitive1. If the screen is abnormal, we recommend that you back up important data in advance (QQ, WeChat, and third-party applications need to be backed up separately), and bring the purchase voucher to the Huawei Customer Service Center for professional testing. 2. If the detection screen is normal, please continue to the next step of troubleshooting; Hope it helps, thank you!

Have a great day!