Why should you change the wheel hub of the car and what is the impact of the wheel hub of the car

If the wheel hub is bent, broken or severely corroded, the hub should be replaced in time. If the damaged wheel is not replaced, there is a high risk that the tire will slip out of the wheel and even cause problems such as loss of control. However, if it is just accidentally scratched, it is not a big problem, and the wheel hub will have to be replaced if it is deformed or dropped directly.

Do not replace the wheel hub at will, if you replace it at will, it will definitely cause damage to the original factory data of the vehicle, after blind modification, not only the fuel consumption of the vehicle will rise, but also the power and braking effect will be affected, so it should be replaced carefully.

To find a professional auto parts store to replace the wheels, the general owner changes the wheels of the vehicle, and changes the original wheels of the vehicle to be larger and wider, so as to make full use of the advantages of wide tires and increase comfort and grip. However, unsuitable wheels will increase tire wear, bring hidden dangers to travel safety, and the comfort of the vehicle will be greatly reduced, so be sure to find a professional auto parts store to replace it.

For motor vehicles, in general, unless your wheels have more serious bumps and scratches, cracks and damage, generally speaking, you will replace the tires at most, but the wheels do not need to be replaced.

Unless the wheels of the vehicle are cracked or damaged, they need to be replaced. If there is no problem, there is no need to replace it. Only the tires of the vehicle need to be replaced after reaching a certain mileage.

Why change the wheels?

1. It is to provide performance. Generally, modified wheels are lighter than the original wheels. There is a saying that for every kilogram of unsprung light, it is equivalent to ten kilograms of weight for the vehicle.

Those four tires are replaced with lighter, more rigid wheels, which is equivalent to one less person sitting. Fuel consumption will also be reduced.

2. Modify the wheels, but also leave enough space for a good braking system. Because the caliper with good braking effect is bigger.

3. Many original cars, the grip of the tires is insufficient, if you replace the larger wheels, the car will be more stable.

4. In fact, it is beautiful.

The function of the automobile wheel hub is: the part of the axle is installed to support the tire, cushion the external impact, realize the contact between the tire and the road surface, and ensure the driving performance of the vehicle.

Hello, this is generally aluminum alloy for steel or iron. Aluminum alloy looks good, and the fuel consumption is a little lower. So you have to change it.

The deformation of the wheel hub may lead to the deviation of the car, and generally this kind of wheel dynamic balance can not be saved.

This is especially important for cars with high-performance tires. Fourth, the cooling effect of the braking system has been improved. Some of the metals in the alloy of aluminum wheels are good conductors of heat, so aluminum wheels are conducive to the rapid release of heat generated by braking, thereby reducing brake failure caused by high heat.

The advantage of changing the wheel hub of the car is that it is beautiful, and then changing the wider tires will make the car more stable during driving and cornering. The disadvantages are: 1. The indication of the odometer has been changed, and the actual speed is faster according to the meter;

2. The load of the steering machine will be the early retirement of the steering machine;

3. The load on the engine is increased, especially when starting, it will feel "meat";

4. The body of the family is raised, and the ground clearance is large, which will cause the original aerodynamic change at high speed, and the car will be fluttering;

5. Increasing the load of the braking system will make your brake pads and brake pads enter the replacement period in advance.

As the closest part of the car to the ground, it's normal for the wheel hub to hit some bumps, so I won't say much about it. Today we're going to talk about wheels. Many car owners may accidentally scratch the curb when parking, resulting in scratches on the wheels.

For many OCD car owners, this is undoubtedly unacceptable. Need to replace scratched wheels? When should the hub be replaced?

If the surface of the hub is only scratched by the teeth and part of the paint is peeled off, there is no need to replace it. Even if the scratch area is relatively large, as long as it does not affect the normal use of the leather shout, you can generally repair the wheel hub in a professional 4S shop or repair shop. And the wheels are not like tires, but there are a lot more tires in terms of **.

As long as the edge of the hub is not scraped off, it can be repaired even if it is scraped off in the middle. If the edge of the wheel is scraped off, then the hub needs to be replaced, as it will affect the airtightness of the tire. At present, most of the tires used in family cars are empty tires, that is to say, there is no inner tube, when the tire is filled with air, it will expand outward, and the edge is just stuck on the edge of the wheel hub, leaning on it.

If the edges are scraped off, even if there is no air leakage at the time, it is not airtight enough. If the car continues to drive in this state, it is likely that a flat tire will occur.

In addition, if the hub is bent, deformed, broken, or severely corroded, the hub needs to be replaced immediately. If the damaged hub is not replaced, there is a high chance that the tires will slip off the hub and even the car will lose control.

There is also a special case, that is, the wheel hub is hit, but the deformation is so small that it is almost invisible to the naked eye. This can only be seen through the dynamic balance. When the wheel is turned in the balancing machine, it can be seen that it sways badly from side to side.

From the perspective of the balance value, the difference between the wheel hub and the standard value is relatively large, and some can exceed 100 grams, or even more than 200 grams. This is caused by the deformation of the wheels, and it is generally impossible to achieve balance by increasing the counterweight. It is better to replace the wheels.

Although the slight deformation of the wheel hub does not cause puncture, it is dangerous to shake the steering wheel easily at high speeds.

In fact, as long as the wheel hub is not bent, deformed, constantly axle, and not seriously corroded, it can basically be used for scrapping the car without replacement. If you need to replace the wheels, it's best to choose which big brands to rely on. After all, the wheel hub is related to the life safety of the driver and passengers, and there can be no room for the slightest auspiciousness.

When replacing the wheel hub of the car, it is best to choose the same size as the original wheel hub, because if the size of the wheel hub of the car is too large or too small, it will affect the performance of the car in terms of acceleration, handling, braking, etc.

Millions of car purchase subsidies.

Need to change the wheels of your car? Under normal circumstances, car wheels do not need to be replaced. If it is deformed or damaged, it must be replaced, otherwise it will affect driving safety.

Or maybe you're not happy with the size of your tires. If you want to improve performance, you need to increase the width to increase the adhesion to the ground.

1.Time to replace the hub: If the hub is deformed, broken, or severely damaged, it should be replaced in time. If the damaged wheel cannot be replaced, there is a high chance that the tire will slip off the wheel or even the car will get out of control, never buy a copycat inferior wheel.

2.Don't change wheels at will: Generally speaking, wheels are modified in pursuit of perfect appearance and personality or to improve the performance of the car.

If the wheels are replaced at will, the vehicle's original factory data may be damaged. After blind modification, fuel consumption may increase, and the power and braking effect will be affected, so be cautious.

3.Find a professional auto parts store: You need to find a professional auto parts store to replace the wheels.

Ordinary car owners replace the wheels of the vehicle, often enlarge and widen the original wheels of the vehicle to make full use of the advantages of wide tires. However, the wider the hub, the better. We had to find a suitable hub.

Improper wheel hub will increase tire wear, bring hidden dangers to travel safety, and reduce comfort. So be sure to find a professional auto parts store for a replacement.

Millions of car purchase subsidies.

Do car wheels need to be replaced? Under normal circumstances, the wheel hub of the car does not need to be replaced, if it is deformed or damaged, it must be replaced, otherwise it will affect driving safety. Or if you are not satisfied with the size of the tire and want to improve the performance, you need to increase the width to increase the adhesion to the ground.

1. Time to replace the hub: If the hub is deformed, broken or seriously damaged, it should be replaced in time. If you fail to replace the damaged wheels, the tires are very likely to slip from the wheels, and even cause problems such as loss of control of the car.

2. Do not replace at will: the general modification of the wheel, are because of the pursuit of perfect appearance personality or to improve the performance of the car, such as stupid pure fruit random replacement, may cause damage to the original factory data of the vehicle, blind modification, may lead to an increase in fuel consumption, power and braking effect will be affected, so be cautious.

3. To find a professional auto parts store: to find a professional auto parts store to replace the wheel, the general owner changes the vehicle wheel, and changes the original wheel of the vehicle to a larger and wider one, so as to make full use of the advantages of broadband and large tires, but the wheel is not as wide as possible, you must find the right one, the unsuitable wheel will increase tire wear, bring hidden dangers to travel safety, and will also reduce comfort, so you must find a professional auto parts store to replace.

Photo by Li Yuanli) @2019

Under normal circumstances, it does not need to be replaced, if the wheel hub is damaged, it must be replaced, to prevent the impact on driving safety, I wish you a safe driving on the road.