What is the reason why the brakes of the car do not press and do not catch fire

Here are the reasons why the car won't catch fire and the brakes won't stop:

1. Steering wheel locked: The steering wheel of the car is lockedThe battery is dead :

The role of braking is to slow down or stop the vehicle. Its working principle is to use the friction between the brake pads and the brake drum and the tires and the ground to convert the kinetic energy of the vehicle into heat energy after friction, so that the vehicle can slow down or stop.

2. Cause of brake failure: there are impurities in the brake master cylinder, and the seal is not tight; Vacuum booster pump failure; The brake fluid is too dirty; Oil leakage from master cylinder or sub-cylinder; leakage at the interface of a gas tank or pipeline; severe overload; Brake hub carbonization; The master cylinder lacks brake fluid; The piston of the master cylinder is worn.

Usually in this case, there are two reasons: 1. The steering wheel of the car is locked. 2. The car battery is dead.

1. The steering wheel of the car is locked. After the key is inserted, turn it in the normal ignition direction, do not turn to the end, and gently turn to the battery switch. After the car is powered on, gently move the steering wheel left and right, and if the steering wheel can be moved, then step on the brakes to ignite.

Remember to turn the steering wheel back to the right in the future to avoid causing the same problem to occur again.

2. The car battery is out of power, in this case, you also follow the method one, after inserting the key, twist to the battery switch, observe whether the driving display screen behind your steering wheel is energized, if you can't judge, turn on your lights to confirm again, and confirm that the battery is out of power if the lights are not on. At this time, you need to assist in taking electricity or replacing the battery, you can call your insurance company to rescue **, let him provide electric rescue, usually in the city and county, are free.

Solution: 1. Pay attention to daily car habits, and return the steering wheel to the right when parking.

2. Try to install and install spare parts, such as adding audio, electric massage cushions, modifying hollow LED screens, etc., so as not to increase the power consumption of the car, accelerate the burden of the battery, and greatly reduce the battery life and storage capacity.

3. Pay attention to the switch of the air conditioning compressor, the compressor is used more in summer, remember to turn it off after stopping, turn it on after starting the car, and control the voltage reasonably.

4. Pay attention to the battery inspection regularly during vehicle maintenance.

The car is a little unable to ignite, it may be that the power of the car battery is insufficient, which makes it impossible to ignite successfully at the start, it may also be that the starting motor of the starter is faulty, it may also be that the ignition system or fuel injection system of the vehicle is damaged, and there may be that the owner of the car will hang the wrong gear when ignition starts, and cannot ignite.

The car can not start, the brakes can not be stepped on, this is because the brake system generally has a power assist system, which can be divided into hydraulic power assist, pneumatic power assist, under normal circumstances, the brake power assist system needs the work of the engine, to ensure the normal operation of the assistant system, without the participation of the power assist system, the brake is difficult to step on, and the effect of the brake can not be played, so it is necessary to eliminate the reason why the engine can not catch fire, so that the engine can run normally, in order to ensure the normal operation of the power assist system.

It is because you turn off the engine and then pull the steering wheel, causing the steering wheel to lock, at this time insert the key to open, and then pull the steering wheel and then ignite, if it still doesn't work, try the opposite direction.

1. Explanation of steering wheel: a wheel-shaped device for controlling the direction of travel of automobiles, ships, airplanes, etc. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft.

2. The role of the steering wheel: the original car was controlled by the rudder. The violent vibrations generated by the car while driving are transmitted to the driver, making it more difficult for them to control the direction.

When the engine was relocated to the front of the car, the driver could no longer use the rudder to drive the car due to the increased weight. The result is a new design of the steering wheel, which introduces a gear system between the driver and the wheels that is flexible and insulates from the harsh vibrations of the road. Not only that, but a good steering wheel system also gives the driver a sense of intimacy with the road.

Drum leakage.

The drum is a common name for a vacuum booster, which looks like this and is generally nailed to the firewall.

After the engine is turned off, it stores a certain level of vacuum. Only when there is a vacuum in the system, the braking system will have a boost, and the pedal will not be very hard when pressed.

When the drum leaks, after stopping for one night, the air leaks into the drum, the vacuum level drops, and the brake pedal naturally becomes harder.

When the engine starts again, the system is replenished with an ample vacuum source, and the natural pedals return to normal.

In order to check the brake system for air leaks, you can do this:

Heat off and rest for 20min;

Apply a few feet of the brakes;

Normal vehicles can be stepped on three or four times, and each stroke is shorter than the previous one, and finally it cannot be stepped on at all;

If there is a leak, you will not be able to step on it once or twice;

The leaky one is fierce, and it can't be stepped on as soon as the fire is turned off;

Hello, stepping on the brakes in the flame-off state is a normal phenomenon, there is no power assist in the state of the vehicle brake stalling, if it is the ignition engine after starting or not stepping on it, it is faulty, you need to go to the repair shop to check the vacuum booster!

Hello, the abnormal sound of stepping on the brake may be the normal operation of ABS, safety reminder, loose chassis parts, unstable brake disc, the specific introduction is as follows: if you press the brake pedal, you have heard the "click" sound between the gearbox and the gear handle, the main reason for the sound may be the electronic linkage between the braking system and the automatic transmission. When the brake is pressed, the gearbox solenoid valve will make a "pop" sound when it is opened, and then the gear lever lock button can be put into gear, which is a safety reminder.

If you turn the brakes and make a rattling sound, or your car does not have an automatic lock button at all, or the sound continues or does not stop, then you should pay attention, it is likely that the brake system is faulty or a loose connection part of the chassis.

4. The brake disc is uneven, the brake disc may have uneven problems during use, and when the brake disc is uneven, it is easier to make abnormal noises when stepping on the brakes.

Precautions: When changing the brake fluid, be sure to drain the old brake fluid in the oil channel before refilling. Brake fluid is an inconspicuous oil product, and the price difference between major brands is only a few dozen yuan, so you should also choose a guaranteed big brand in the choice of brake fluid.

Secondly, the maintenance of the four-wheel brake system, in addition to cleaning or replacing the brake pads and brake discs, should focus on the lubrication of the sub-cylinder.

The reasons why the car does not catch fire and the brakes cannot be stepped on are: 1. The steering wheel of the car is locked; 2. The car battery is out of power. The function of braking is to reduce the speed or make the vehicle stop, and its working principle is to use the friction between the brake pads and the brake drum and the tire and the ground to convert the kinetic energy of the vehicle into the heat energy after friction, so that the vehicle slows down or stops.

The reasons for brake failure are: 1. There are impurities in the brake master cylinder and the seal is not tight; 2. Failure of the vacuum booster pump; 3. The brake fluid is too dirty; 4. Oil leakage from brake master cylinder or sub-cylinder; 5. Air leakage from the gas storage tank or pipeline interface; 6. Serious overload; 7. Carbonization of brake hub; 8. The brake master cylinder lacks brake fluid; 9. The piston of the brake master cylinder is worn.

The brakes of the car can not be stepped on, this is because whether it is a truck or a family car, the braking system is a booster system, the engine does not work, the booster system generally does not work, first of all, you have to start the engine normally, can not ignite, you can first check whether the battery is losing power, the car needs to check whether the gear has this vacancy, rule out several reasons.

It's time for the car to be repaired, it's faulty, and I'm really looking forward to it.

The brake device of the car is a very important component, in the daily driving process by stepping on the brake pedal to control the reduction or stopping of the car, before starting to step on the brake, some car owners reflect that their brakes are suddenly very hard can not start, want to know what is going on if the brake does not move and does not ignite, you can learn about it below.

The sudden hardening of the brakes may be due to the fact that the owner has stepped on the brakes several times after turning off the engine, causing the vacuum in the brake booster pump to disappear, and it is more difficult to press the brake pedal without the help of the booster. And the booster pump is not working in the flame-off state, so the owner only needs to try to re-ignite, and press the brake pedal hard, and wait until it starts to return to normal.

It is also possible that the vehicle's brake booster pump has an air leak or a component failure, so due to the loss of power assist, the owner will feel very hard and laborious when stepping on the brakes. If the owner of the car cannot return to normal after pressing the brakes several times, it is necessary to find a nearby repair shop and complete the fault removal before continuing to drive.

Car owners can also pay more attention to the correct braking method when braking

1. When driving at low speed, you can encounter an emergency in front of you and brake urgently, and step on the brake pedal, but you can't do it at high speed to avoid the vehicle sliding and rollover.

2. You can brake slowly under normal road conditions, release the accelerator pedal while pressing the clutch pedal, switch the low-speed gear, lift the clutch pedal after the speed is lowered, and press the brake pedal until it stops.

3. In the case of high temperature under the long slope in the mountainous area or continuous braking, the intermittent braking of the brake pedal can be effectively avoided by intermittently stepping down and relaxing the brake pedal.

This is just that your car is not started so the brakes can't be stepped on, after starting the engine, there is a booster system of brakes can be stepped on, if it can't catch fire, this is the power system, it may be the oil circuit or the circuit is possible, which needs to be checked one by one to know.

This is just your brake, there is a power system, if it can't catch fire, this is the power system, it may be by the road or it may be the frequency conversion is possible, this needs to be checked to know.

Hello, nice to meet you. I'm Xiaomo, an auto repair consultant. With 15 years of experience in automobile maintenance, he is currently working in FAW-Volkswagen, one of the world's top 500 state-owned enterprises, with a senior certificate for automobile maintenance and a certificate for auto beauty technicians, and is familiar with the detailed configuration of major brands of vehicles, and has provided comprehensive automobile repair and maintenance consulting for tens of thousands of customers.

We are typing the answer by hand, so please be patient for a while. I'll give you a solution in a few minutes, thanks! ❤️

The car brake can not be stepped on is due to the car's vacuum booster pump leakage or failure, you must know that the force we press the brake pedal is increased by the brake booster pump, if it fails, the brake will not have the main force, then it will be difficult for us to step on.

Question: When you hit the brakes, you feel a leak.

The sound of the air leak lasted for about 5 seconds.

Ask if there is any impact on driving.

It is very dangerous and may cause the brakes to not be able to brake properly.

I'm sorry for you to like it

First of all, you need to check whether this phenomenon is caused by the loss of battery power? If the battery is out of power, you need to charge the battery or replace it with a new one.

In the case of making sure that the battery does not lose power, focus on checking whether there is a problem with the vehicle starter or whether the anti-theft is locked? If there is a problem with the starter, you need to check the corresponding control circuit of the starter or replace the starter. If there is a problem with the anti-theft system, you need to re-do the anti-theft matching.

The second major aspect is that the vehicle engine can rotate, but does not catch fire, so in this case, it is important to check, is the gasoline pump oil pressure insufficient? Or the vehicle engine does not ignite, if the pump oil pressure is insufficient, this situation requires the gasoline pump to be replaced. Check the fuse or wiring of the gasoline pump.

If ignition is not required, focus on checking the crankshaft position, sensor and ignition coil.

Question: The car doesn't catch fire.

Ask how to determine if the battery is losing power?

Question: I can open it when I was on fire yesterday, but I feel a little weak and powerless, and I can only open it after a few turns.

Is this feeling of running out of power?

Question: Before this, my engine failure light was on yellow for a while, and occasionally the automatic start-stop light and the triangular exclamation mark light in the lower right corner were also on.

If you have an automatic transmission, the handbrake has not been started before you release the brakes, and the car has slipped a little bit, causing the brakes to not move when you start the next time, you can try to step on it a little heavier, or try to release the handbrake.

The reasons why the car can't catch fire and the brakes can't be stepped on are as follows:

The steering wheel of the car is locked. After the key is inserted, turn it in the direction of normal ignition and gently turn it to the battery switch.

1. The battery voltage is lower than 10V, resulting in insufficient starting energy. You can try to start with the wire.

2. The starting motor is seriously worn and the motor is bored.

If the instrument light is normal after the key is opened, the manual transmission car can try to start the cart. Don't rule out the automatic car yourself, if the insurance is complete, call the accident-free rescue tow to the repair shop for another check.

The automotive electronic ignition system is completely different from the mechanical ignition system, it has an electronic control device for ignition, and there are ignition control curves (maps) required by the engine under various operating conditions. The working status of the engine is judged by a series of sensors such as engine speed sensor, intake pipe vacuum sensor (engine load sensor), throttle position sensor, crankshaft position sensor, etc.

Find out the ignition advance angle required by the engine in this working state on the map, and carry out ignition according to this requirement. Then the above ignition requirements are corrected according to the knock sensor signal, so that the engine works at the best ignition time.

The current popular Atkinson engine changes the compression ratio by adjusting the intake time and ignition time to achieve the purpose of fuel saving.