What should I do if the black screen of death of the apple phone can t be opened?

Black Screen Reason Check and Solution.

Method 1: 1. Check whether the orientation of the mobile phone card and memory card (SD card) is correct, sometimes the installation is not normal, and it will lead to an automatic black screen.

Method 2: 1. Check whether the phone has power (check the charging interface by plugging in the charging interface), less than 2% of the battery will cause an automatic black screen.

Method 3: 1. Software problems cause automatic black screen, please confirm whether there are any incompatible applications installed recently that cause the phone to suddenly shut down abnormally. Users are advised to perform a factory reset and upgrade to the latest software version. (Please back up key data in advance before factory reset).

Press and hold the power button for more than 10 seconds to force restart the phone, and if the phone can enter the standby interface normally, the phone will be repaired through the normal upgrade and recovery operation. If it still won't turn on and can't restart, repair the phone by forcing the upgrade to resume the operation.

2. Common upgrade and recovery mode.

1) Restore factory settings.

In the operation steps, in the phone settings, click "Backup & Reset" - > Factory Reset" - >Reset Phone" (as shown in the three pictures below), the factory reset will be completed after the phone is restarted, and then it will automatically restart normal use.

Operation steps (to ensure that the mobile phone is connected to wifi and can access the Internet), "Settings" - >System Update" - >Check for Updates" - >Select the new version" - >Select ** and install "Start the upgrade".

3) Forced upgrade recovery mode (SD card forced upgrade).

For details, please follow the steps below:

Step 1: Prepare an SD card with a capacity of 2G or more to ensure that the available space is larger than the size of the upgrade package, and it is recommended to use brands such as Sandisk, Kingstone, or KingMax.

Step 2: Create a "dload" folder in the root directory of the SD card (note: for the telecom version of Honor, please create a "dload" folder in the root directory of the internal memory card), and put the "good software upgrade package" into the dload folder;

Step 3: Plug in the charger, press and hold the volume up and down buttons, and press and hold the power button for more than 10 seconds to start the phone. The phone will enter the SD card to force the upgrade, if the low battery cannot be started because the battery is exhausted (the low battery icon is displayed), charge it before upgrading to ensure that the phone can start, please insert the charger during the upgrade process, otherwise the upgrade will fail if the battery is insufficient.

Step 4: After the phone enters the upgrade, the upgrade will be completed automatically, the upgrade time is about 5 minutes, if the upgrade fails, you can try to try again.

Method 4: 1. Hardware problems lead to automatic black screen, in this case, it is a hardware fault that cannot be eliminated by the above 3 methods (such as internal power cord contact disconnection, etc.), and it will be permanently unable to boot. You need to find Huawei's after-sales service outlets for hardware testing.

Take it to the repair shop and show it to the master.

The black screen of Apple can't be repaired through third-party software, such as Niu Xuechang Apple Repair, Apple Recovery Master and Crazy Master Apple Repair Master, taking Crazy Master Apple Repair Master as an example, the specific operation is as follows:

1. Open the Crazy Master Apple Repair Master.

Open the crazy master Apple Repair Master on your computer and enter the main interface.

2. Select the standard mode.

Then select the standard mode and connect the computer to the phone via a data cable.

3. Select the device type.

Then select the device type and enter DFU mode as prompted.

The solution to the mobile phone black stool screen can't be opened is as follows:

1. If the mobile phone is stuck and the black screen is unresponsive, you can connect the mobile phone to the charger first, and press and hold the power button for 10s to forcibly restart the mobile phone. After restarting your phone, use Phone Manager to clean up system cache data and junk files. If it freezes when using a third-party app, it is best to uninstall this abnormal app, and do not run multiple apps while charging on a daily basis.

2. It can also be in the state of networking. Contact the service** guide to use the remote diagnostic tool on your phone to initially troubleshoot the phone.

3. Open "Services", select "System Performance" in troubleshooting, and click "Start Detection".

4. If the problem is still not solved, after backing up the data, bring the purchase invoice to the special after-sales service center to test the mobile phone.

Reasons for the black screen of the phone:

1. Memory problems

Usually, when the phone stores too many things, it will not only slow down the running speed considerably, but also it is easy to go black during the running of the program, and then automatically quit the program. When the phone's coarse memory is occupied by 80%, it may freeze or go black.

2. Memory problems

Usually, when the phone stores too many things, it will not only slow down the running speed considerably, but also it is easy to go black during the running of the program, and then automatically Zen Zhizhi quit the program. When the phone's memory is occupied by 80%, it may freeze or go black.

Hello, I'm glad to answer for you, I'm sorting out the answer, please wait a moment dear, other vertical Zheng Bei albums are other albums, because in addition to their own camera shooting, other software saved ** will also create their own Xiang Qing Fiber album. The deletion steps are as follows: 1. Open the phone album.

2. Click on other albums, long press the album you want to delete, and select "Delete" after checking. Dear, the above are the steps to delete other device albums, do you understand?

1.In general, it may be because the battery is running out and the device cannot be turned on. If this is the original lack of basic silver that we can't turn on, please plug in the phone first.

If at this point you see a charging sign on the screen that shows that the battery is low, the battery is dead. Some friends think that if you connect it to the power supply and charge it, you can turn on it normally. Actually, if you use up all the battery power, you'll need to charge it to 5% to turn on properly.

So in this case, please let the phone charge for a while before turning it on. 2.If you're sure your phone has enough battery but it won't turn on properly, there may be a problem with your phone's software system.

At this time, we can try to press the "Home and Power" buttons of the phone at the same time until the screen lights up. 3.If the above operation method does not work, we can also connect the phone to the power supply at this time, and then press the power and home buttons on the home screen at the same time to see if it can be restarted.

The phone screen suddenly went black, and the method of not turning on is as follows:Operating environment: iphone13,.

1. Connect the mobile phone to the socket with a data cable.

2. Press and hold the power button to see if it can turn on normally, if it can, it means that the mobile phone battery is faulty and cannot be stored, and the battery can be replaced.

3. If it can't be turned on normally, check whether the indicator light can be lit.

4. If it can be lit, it means that it can be charged normally, try to press and hold the power button to force restart.

5. If the hail fruit cannot be lit, it means that there is a problem with the internal circuit of the mobile phone and cannot be solved by yourself, and it should be sent to a professional institution for maintenance.