Omega watches have been put on hold for a long time

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

Hello, the watch will not be worn for a long time will cause the watch to stop due to insufficient kinetic energy, it is recommended that you manually wind or wear it for a period of time to try, if you still do not go, it may be due to bump failure or hairspring failure, etc., it is recommended that you go to the professional after-sales point to take a look.

If it exceeds 40 hours, it is not considered a steal stop, and the 25oo core winding rate is not high.

There are many reasons for the watch to stop secretly, but in addition to malfunctions, there are also problems with wearing habits that lead to insufficient power and stop-and-go. There are also yes, first of all, make sure that you have enough time to wear it every day, see if this situation will happen, and don't take it off and put it on the table as soon as you get to the office or when you get home.

If you ensure at least 7-8 hours of wearing time every day, there will still be a sneak stop, then it may be because the watch needs to be washed, of course, the watch you just bought generally does not say that you need to maintain the oil immediately, but it is possible that the watch you bought is in the counter for a long time, and some of the watches that are pressed in stock may be placed in the counter for a long time, if the counter has not been sold, put the watch for several years, because the internal lubricating oil is naturally aging, it is also necessary to wash the oil, Of course, this situation is very rare, because after all, it will not go away if you put it there, but it will not age so quickly if you put the lubricating oil.

Stop, there may be the following reasons:

1. See if the crown is pulled out, the crown is pulled out, and the watch stops.

2. Whether the second hand touches the glass, there will be a circle mark on the glass.

3. Whether the three watch hands are not well balanced, causing contact and causing stopping.

4. Whether the battery is exhausted or not, it generally needs to be replaced in 1-2 years.

Reason for stopping:

The more common reason may be the lack of kinetic energy, automatic mechanical watches do not need to be manually wound, but to keep the mechanical watch on the hand to wear at least 8 hours of time, because the automatic mechanical watch uses the arbitrary swing of the rotor to wind up, and the rotor swings with the movement of the arm, so if the mechanical watch needs to be worn on the hand often.

But if you often wear it on your hand and don't walk, it may also be a lack of kinetic energy, and then we need to manually wind it.

Room 3705, 37th Floor, Tower 2, Grand Harbour Center Plaza, No. 3 Hongqiao Road, Xuhui District, Shanghai.

There are three reasons for inaccurate time:

First, the power is insufficient.

The power required for the watch is not the same, like the Stuling mechanical watch, which relies on daily wear to shake and store power, if you don't wear it for a long time, there is no power, then the watch will definitely stop or slow down. The manual one needs to be wound up and down from time to time, and some rely on electronics to maintain rotation, so if the watch is inaccurate recently, it is likely that the electronics are out of power and need to be replaced.

2. External interference.

This is whether you pay attention to it when you wear it daily, for example, watches are relatively squeamish, waterproof, anti-magnetic, and shock-proof, if you don't do a good job, it is normal for the watch to be inaccurate. If you wear a watch that cannot be worn for strenuous exercise, and you wear it to play golf or badminton, the strong vibration may cause damage to the watch parts, and the watch will not be accurate.

In addition, it is a cliché that watches are afraid of magnetism, if your job is to engage in some research things and need to be in frequent contact with large electronic devices, then try not to wear a watch, because the magnetic field existing around it will disturb the normal walking of the watch. Some people say that the watch is to be worn, and the baby is not good every day, so why buy it? That's true, but you should also be careful when wearing it.

3. Proper maintenance.

The watch is more precise, there are more small parts, and the mutual fit between the parts can operate normally, so the haul is indispensable for friction, so the watch is oiled, and it will inevitably dry up after a long time, plus there may be some impurities into the watch, so it will cause the watch to go inaccurate, at this time you have to go to maintain it, clean up the watch.

It's a lack of motivation. The power required by the watch is not the same, like an automatic mechanical watch, it relies on the shaking of daily wear to store power, if you don't wear it for a long time, there is no power, then the watch will definitely stop or slow down. The manual one needs to be wounded up and down from time to time, and some rely on electronics to maintain rotation, so if the watch is inaccurate recently, it is likely that the electronics are out of power and need to be replaced.

Instructions for use 1, normal wear to avoid vibration has an appropriate amount of activity, in order to make it continue to be on the strip, normal operation (when the wearer is less active, it may be slow, this is a normal phenomenon.) When using it for the first time, please rotate the handle 20-30 times to make the initial winding of the mainspring), although the watch is shockproof, it is easy to break the tip of the pendulum shaft or the journal of the wheel train when the external impact is strong, and it can also make the fast and slow hand vibration affect the time. 2. Prevent magnetizationAlthough the watch is made of non-magnetic materials that are not easy to magnetize, it is greatly affected by the magnetic field when walking, such as the magnetic buckle on the TV, radio speaker, backpack or leather bag.

3. Try not to take the watch to swim or wash clothes when the watch is waterproof, once it rains or gets wet, you can't pull out the watch handle to adjust the watch at this time, but wipe it dry immediately. Because the handle head is more protruding, try to avoid it being bumped, and pay attention to the gap between the handle head and the case, too small will affect the operation, and too much will affect the waterproof performance, but also unsightly.

Summary. Clause. 2. The watch runs out of oil.

First of all, when the machine loses its power source, it will stop working, and I believe everyone should know this. If the Omega in everyone's hand belongs to a quartz watch, then the battery is its power source, and when the battery is depleted, the Omega will naturally not be able to continue to operate.

Secondly, if the watch in your hand is not a quartz watch, but a mechanical watch, then there is no problem of a dead battery. In this case, if the watch does not run, it is likely that the oil in the watch has been exhausted, which affects the normal operation of the mechanical watch.

The reason why Omega watches are not gone is analyzed here, and depending on the type of watch, the reasons can be found mainly from the above two aspects. If the above two reasons do not solve the problem, it is recommended that you go to a regular watch center for maintenance, and the quality of watch maintenance is also guaranteed.

What happens when an Omega watch stops when it's not worn?

Hello, glad to answer for you.

Clause. 2. The watch runs out of oil. First of all, when the machine loses its power source, it will stop working, and I believe everyone should know this.

If the Omega in everyone's hand belongs to a quartz watch, then the battery is its power source, and when the battery is depleted, the Omega will naturally not be able to continue to operate. Secondly, if the watch in your hand is not a quartz watch, but a mechanical watch, then there is no problem of a dead battery. In this case, if the watch does not run, it is likely that the oil in the watch has been exhausted, which affects the normal operation of the mechanical watch.

The reason why Omega watches are not gone is analyzed here, and depending on the type of watch, the reasons can be found mainly from the above two aspects. If the above two reasons do not solve the problem, it is recommended that you go to a regular watch center for maintenance, and the quality of watch maintenance is also guaranteed.

Reasons why mechanical watches go and stop:

1. The speed of the mechanical watch is mainly determined by the pendulum frequency, usually the larger the pendulum amplitude, the smaller the pendulum frequency, and the smaller the pendulum amplitude, the greater the pendulum frequency. Generally, watches rely on the retraction and release of the hairspring to control the swing, which is the basic principle of adjusting the speed and slowness. If the hairspring is longer, the swing will increase, the frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

2. The structural problem itself, due to the gravitational force of the earth, the offset of the horizontal position and the vertical position will produce a displacement, the mainspring is tightened from the top to the relaxation, the torque is unbalanced, and the external temperature, magnetic field, vibration, etc., even if the mechanical watch increases some frequency, it is impossible to achieve the accuracy of the quartz electronic watch.

3. The effect of the magnetic field, after the hairspring is magnetized, the circle between the rings is only shown when wearing, there is a sticky or short-term lap, especially in the façade, the hairspring will hang down due to its own gravity, and the shaking of the arm will intensify its radial movement, and the magnetic energy utility is shown because of this.

4. The balance of the balance wheel and the balance spring, especially the balance wheel, the balance wheel is very poor, which will cause the balance wheel to highlight the precision change of the surface under a certain swing.

1.Insufficient power reserve: You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch may also cause insufficient power reserve, you can replenish the power by manual winding, and then observe whether it continues to be fast or slow.

2.Insufficient battery: If the quartz watch suddenly finds that it is slowing, it is likely that the battery is insufficient, and you can send the watch to a special repair point to check the battery level.

3.Having been hit or impacted: The watch is very tight, and if it is hit or hit, it may cause loose damage to the internal parts, or it may cause time problems. This is to be dealt with in a timely manner.

4.Need for maintenance: The lack of oil or the wear and aging of the internal parts of the movement may cause time problems, which need to be serviced and sent to a designated repair point for maintenance services.

5.In addition to the above common situations, the watch is affected by some ambient temperatures: if the balance spring of the watch is magnetized, the watch will not be accurate.

Hello, glad to answer for you.

Reasons for inaccurate time: insufficient kinetic energy reserve of the watch, insufficient battery of the watch, the watch has been hit or hit by an external source, the watch has not been maintained for a long time, and the watch is affected by magnetic fields.

Solution: It is necessary to go to the after-sales center for testing and maintenance.

If you have any questions, please call** Please feel free to call.

Room 1102, Block D, Bloomage International Center, No. 6 Jianguomenwai Street, Chaoyang District, Beijing.

The reason for the watch to stop and go: generally there is a problem with the core wheel or gear teeth, if it is an old watch, it is mostly related to the wear of the shaft eye of the bridge, and the wear of the axis eye will make the core wheel tilt in the bridge, which is easy to cause the front end of the minute hand to rub against the dial characters or the hand indicating the number of seconds on the clock, and the two-hand and thin watch will rub against the inside of the watch glass.

If the watch is used for a long time, then its wear and tear will be more serious, and the external maintenance of the watch will be easily damaged. It is necessary to regularly replace the watch you are wearing, and it is necessary to maintain the watch regularly, for the service life of your watch, it is better to maintain it regularly.

There are three main reasons why mechanical watches are inaccurate.

1.Watch magnetization: The watch is in too much contact with items with magnetic fields, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate.

After being magnetized, the watch may stop, slow, or fast. After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized to restore it to normal.

2.Lack of maintenance: If the watch lacks maintenance, it will lead to wear and tear of parts, dry up the sludge, affect the normal running time of the watch, and make the watch appear fast and slow.

3.Mechanical failures: Mechanical failures such as watch balance spring failures, escapement failures, and component slips can cause the watch to be fast and slow.

Mechanical watches are sometimes fast and sometimes slow, and it may be caused by severe impacts, water ingress, etc. Quartz watches are generally very accurate and less prone to time failures. In the case of adequate maintenance, it is more likely to be fast and slow, which is more related to the failure of the circuit board, or the poor contact of a certain part.

Room 602, 6th Floor, Block W3, Wangfujing Oriental Plaza, Beijing.

Hello, glad to answer for you.

Reasons for inaccurate time: insufficient kinetic energy reserve of the watch, insufficient battery of the watch, the watch has been hit or hit by an external source, the watch has not been maintained for a long time, and the watch is affected by magnetic fields.

Solution: It is necessary to go to the after-sales center for testing and maintenance.