Under what circumstances should you turn on your car s high beams?

High beams are one of the lights. A lot of friends don't know how to use high beams properly. The misuse of high beams is highly likely to cause traffic accidents.

High beams can improve vision and broaden the field of view. On a dark road without street lights, the visual range with high beams on is much greater than when low beams are turned on. In fact, the high beams can not only illuminate but also express themselves to other drivers through different flashes, which is the default driving rule.

Never use high beams when turning on the street lights at night. There are no street lights, and high beams are only used when there are few vehicles on the road. When encountering high beams, switch to low beams.

The exact distance depends on the situation. Change from 150 meters to 200 meters away. When you are in a meeting, the front of the car can be turned back into high beams after the meeting.

In case of overtaking when driving at night with high beam, you should change back to low beam 100 meters in advance, turn on the overtaking lights, that is, quickly lift the dimming lever up 2-3 times when low beam.

When meeting at night, if the other party uses high beams, you can turn on the overtaking lights once or twice to remind the other party to change the lights. Misuse of high beams is a bad driving habit and can be life-threatening in severe cases. Master the correct operation of the high beams.

Now that everyone's living standards have improved, it is not difficult for many people to buy a car. I believe everyone has noticed that there are more and more cars in China, and the traffic situation is becoming more and more complicated. The more people who drive, the more negative effects there are.

Driving is not an easy task. When driving, people often encounter some unexpected situations, so driving is not only about having good driving skills. Have good driving habits, otherwise driving on the road is dangerous, especially at night.

When it comes to driving at night, I believe many car owners hate high beam dogs. The so-called high beam dog often turns on the high beam when driving at night, even if it is driving on the road illuminated by the street lights, because the high beam of the car is very bright, once it shines on the eyes of the owner, it will cause temporary blindness, and the owner can not see the road clearly, which can easily lead to traffic accidents. Generally, the opposite vehicle turns on the high beam, and the owner will remind the other vehicle to turn off the high beam.

But even if the other party is reminded to turn off the high beams, the other party's vehicle is still indifferent, and the owner cannot take the other party away. This kind of high beam dog is also called by everyone, but it does not mean that the high beam cannot be turned on in all cases, otherwise the existence of high beam is meaningless. When you encounter these two situations while driving, the high beams must be turned on, and others will not scold you.

In the case of very poor lighting conditions on the driving section, you can turn on the high beams.

In the case of poor road lighting conditions, you should turn on the high beams, because only in this way can you better ensure your driving safety.

We are walking on a rural road, because there are no street lights on the rural road and the surroundings are particularly rugged, so in this case the high beams should be turned on.

High beams generally need to be used in the following situations:

1. High beams can be used for roads without street lighting or poor lighting;

2. When the road conditions are unfamiliar and you need to see street signs and other signs, you can use high beams, but you should quickly restore to low beams;

3. When a motor vehicle overtakes, it should turn on the left turn signal in advance, change the use of high and low beams or honk the horn to remind the vehicle in front to pay attention to avoidance;

4. When passing through corners, curves, and intersections without signal lights, you can change the use of high and low beams as a reminder.

Compared with low beams, the light of high beams shines out in parallel, the light is concentrated and brighter, and it can illuminate higher and farther objects, which is of great help to the driver's vision at night. High beams can improve the line of sight and expand the field of view.

How to turn on the high beams of the car:1. Find the high beam switch on the joystick on the left side of the steering wheel or on the light knob on the left side of the steering wheel;

2. Turn on the low beam, press the lever down (that is, the direction of the engine), then the dashboard will be displayed, and the high beam can be turned on. The light emitted by the high beam at its focal point will shoot out in parallel, the light is more concentrated, the brightness is larger, and it can illuminate very high objects. The light emitted by the low beam outside its focal point (between 1x and 2x the focal point) is divergent and can illuminate a large area of objects in the vicinity.

The difference between high beam and low beam is: high beam angle and long distance; Low beam angle and close distance.

High Beam Effect: High beam can improve the line of sight and expand the field of view. On a pitch-black road with no street lights, the visibility range with the high beams on is much greater than when the low beams are on. Therefore, in such an environment, it is very necessary to turn on the high beams.

Landlord, after the low beam is turned on, push the lever on the left side of the main driver's steering wheel outward to turn on the high beam. I wish the landlord a happy car. Satisfied.

The low beams are turned off when the high beams are on, and the high beams can only be used when there is no other light around.

For example, if you are driving on a highway without street lights at night or in a suburb without street lights at night, you can turn on the high beam to expand the field of vision, but when you encounter a car on the opposite side and need to meet the car, you can switch to low beam for safety and politeness.

High beams should not be used when there is other light around, whether natural or artificial. However, at night, the high and low beams are turned on and off alternately, which can replace the horn to alert the surrounding pedestrians and vehicles so as not to cause too much noise.

It will be turned off, the high and low beam is a bulb with two filaments in it, the lamp head and foot are two points, the common pole is the shell, and the control of the high and low beam is controlled by the transfer switch.

GB4785 stipulates that the low beam is allowed to be on when the high beam is on, but the high beam must be turned off when the low beam is turned on.

When the vehicle turns on the high beams, the low beams are turned off.

When driving at night, it is best not to drive high beams when driving in the city, because the lighting conditions in the city are generally better. If you turn on the high beams, it will affect the view of other vehicles. At night, the high beam can be turned on and off alternately to remind pedestrians and vehicles around the horn, so as not to cause too much noise and affect the rest of residents in residential areas.

Driving on highways and in areas where there are no street lights can help to expand the field of view. When there is a car on the opposite side that needs to meet the car, for safety reasons, switch to low beam.

There are the following situations that can turn the lights on and off:

1. High beams can be used for roads without street lighting or poor lighting; However, when intersecting with other vehicles and pedestrians, change the low beam to prevent dazzling;

2. When the road conditions are unfamiliar and you need to see street signs and other signs, you can use high beams, but you should quickly restore to low beams;

3. When a motor vehicle overtakes, it should turn on the left turn signal in advance, change the use of high and low beams or honk the horn to remind the vehicle in front to pay attention to avoidance;

4. When passing through corners, curves, and intersections without signal lights, you can change the use of high and low beams as a reminder.

5. When a motor vehicle is driving at night without street lights, poor lighting, or in low visibility conditions such as fog, rain, snow, dust, hail, etc., the headlights, marker lights and rear position lights shall be turned on, but the high beams shall not be used when the rear vehicle driving in the same direction is driving in close proximity to the front vehicle.

How do you turn on the high and low beams of a car? In most models, the light control mechanism is placed on the left side of the steering wheel, and the operation of the high beam and low beam is done on the left side of the steering wheel. The difference is that some of the low beam switches are on the left joystick, and some are on the left independent light knob; The high beam switches are on the left side of the joystick.

The use of high and low beams is as follows: 1. Please switch to low beams at night when you meet cars 150 meters away from the opposite direction. 2. Please use low beam lights when meeting with non-motorized vehicles on narrow roads, narrow bridges and at night.

3. When passing through an intersection controlled by traffic lights at night, please use low beams when turning. 4. When a motor vehicle passes through a sharp bend, slope, arch bridge, pedestrian crossing or an intersection without traffic signal control at night, please alternately use high and low beam lights. 5. Please do not turn on the high beams when driving in foggy days, because the high beam light axis is on the upper side, and the light emitted is diffusely reflected by the fog vapor, forming a white expanse in front of the car, which makes the driver unable to see clearly.

Depending on the model, there are generally two ways to open the low beam, one is the knob type, and the other is the lever type. The knob-type low beam turn on button is at the bottom left of the steering wheel, generally located below the air conditioning outlet, and there are four patterns printed above the knob key, namely O, Auto, wide indicator light and low beam, and there are arrows on the knob key, and the high beam needs to be rotated to the right to the position of the low beam pattern, and the low beam will be turned on. The lever-operated low beam turn on button is @2019

The high beam of the car can be turned on by the light lever switch, which can be adjusted to the low beam by twisting the light switch to low beam and then flipping the lever. The specific steps are:

1. Find the light lever control switch of the car, and pay attention to the various icons identified on it.

2. Twist the upper rotary knob of the control switch to align with the low beam icon.

3. After adjusting to the low beam, you only need to push and pull the lever to adjust to the high beam.

4. After the high beam is turned on, its irradiation distance and width will increase.

Notes:1. It is worth mentioning that the use of low beam and high beam is especially important when two cars meet at night. When the two cars are 150 meters apart, they should turn off the high beams and switch to the low beams to avoid the high beam lights from shaking to the other driver, so as to ensure driving safety and a step in civilized driving.

2. The owner can distinguish the low beam and high beam through the indicator light on the dashboard, the light line of the low beam icon is facing down, and the light line of the high beam is straight forward. In practice, the same is true for the construction of low and high beams.

1. In most models on the market, the light control mechanism is placed on the left side of the steering wheel, and the operation of high beam and low beam is completed on the left side of the steering wheel. The difference is that some of the low beam switches are on the left side of the joystick, and some are on the left side of the independent light knob; The high beam switches are on the left side of the joystick.

2. There are several ways to turn on the high beams:

1) It is the left joystick to the driver's direction, the high beam is turned on, and the longitudinal lever is automatically reset after letting go, and the high beam is turned off. This is called "flashing" (flicking, letting go) and is usually used as a way to alert other vehicles or pedestrians when driving.

2) Push the joystick away from the driver (some brands are in the opposite direction, such as Peugeot and Citroen), and the high beams are always on; After manually dialing the lever back into place again, the high beam is turned off.

3) There are some car owners with high beams on, and they don't know that they are driving high beams. In fact, this problem has already been taken into account by car designers – you can tell from the dashboard of the car whether the current high or low beams are on.

3. Properly turn on the high beam is conducive to "recognizing the road", when going to some unfamiliar and sparse places, in order to find out the road conditions ahead, you can properly turn on the high beam, but it must be to ensure that there is no vehicle in the opposite lane to turn on the high beam.

4. Appropriate use of high beams to remind the oncoming car, driving at night by the oncoming vehicle far away from the lack of light "attack", I believe that most drivers have this experience, you can try to "flash" the lights, remind the oncoming vehicle to switch the high beams back to the low beam. If the other party is still indifferent at this time, the best way to deal with it is to reduce the speed appropriately.

5. Do not use high beams indiscriminately when driving at night, otherwise it may bring serious safety hazards to other vehicle drivers.

How do you turn on the high beams of a car? There are two ways to turn on the high beam: the first is to dial the left joystick in the direction of the driver, the high beam is on, the joystick automatically resets when you let go, and the high beam is turned off.

The second method is to push the lever away from the driver (some brands go in the opposite direction, such as Peugeot and Citroen), and the high beam is always on The car high beam can be turned on by the light paddle switch, which can be adjusted to the low beam by twisting the light switch and then turning the lever back to adjust the low beam to the high beam. Generally, do not drive high beams when driving in the city, because the lighting conditions in the city are better, and the angle of the high beam is too high to easily shake the eyes of the opposite car and the surrounding pedestrians, affecting the sight of others, which is very unsafe and is an impolite driving behavior. When driving on highways and in places where there are no street lights in the suburbs, you can turn on high beams to expand the range of vision, but when you encounter a car on the opposite side and need to meet the car, you need to switch to low beam for safety and politeness reasons.