I can t play games with the router, how to set it up?

You set up dns no.

If you don't have it, you can check it out.

There is a national DNS answer supplement on it It may be that there is a problem with the line of this server you are connected to or the server is being maintainedAnswer supplement Is there a firewall installed?! If there is a firewall that prohibits dungeons and warriors from accessing the network, the answer is added Turn off the firewall that comes with windows-xp, and the method of closing it is: Start - Control Panel - Windows Firewall - Select Close.

Turn off the installed firewall software and try to add the answer Stand-alone computer dial-up can enter the dungeon with the warriors, right? Routing doesn't work? That's how to understand it, the answer is added: Enter the router and select the factory reset function, if you don't know the functions in the route, find the setup wizard and follow the wizard to set up.

General settings for PPPoE dialing Enter the account number and password.

Set the DHCP allocation range.

Set up the DNS server on it If it doesn't work It is recommended that you change the route Answer supplement There is also if you set up DHCP service and DNS It is best to choose the IP of the online neighbor as automatic assignment to avoid you not understanding the route assigned to your IP segment and DNS manual input The lack of DNS will be restricted.

Give me the points, add 358809220 to help you solve it.

1. Log in to your own router first, and after entering, click Advanced Settings in the upper right corner.

2. On the advanced settings page, click Internet Control on the left, and then click on the behavior management in the center.

3. Enable this behavior management function first.

4. In this new rule, as long as it is with Yu Dan lead, the target of the visit is placed.

5. Click "Add New Destination" here.

The router restricts certain games (usually by blocking the game port):

Take the Zhuxian game (the communication port of the game is 29000, the communication port of a certain game needs to capture packets, how to capture packets, please refer to "How to Capture Packets") as an example

1) Turn on the firewall function (page wizard: Security Zone, Firewall, Firewall Settings).

2) Set outbound communication policy: Add the following rule to prohibit all UDP packets destined for destination port 29000 from passing through (page wizard: Security Zone Firewall Outbound Communication Policy);

A router (also known as a pathfinder) is a computer network device that can transmit data packets through a network to a destination (selecting the transmission path of data), a process called routing. A router is a device that connects two or more networks with each other, and the routing works at the third layer of the OSI model—the sock mill—that is, the network layer, such as the Internet Protocol (IP) layer.

Playing games, especially lol, flying cars, cf, dota and other competitive games playing imitation dust is the most headache when encountering game delays, especially with wireless networks, below I will tell you how to set up a router, there is no longer a delay in playing games.

Preparation Zen 1Know the login account and password of the router.

2.Continue to spike acres according to the method in the figure.

To play the game normally, first of all, the global uplink and downlink cannot be restricted, and the default is the best. You have to ensure that your network is absolutely smooth, then you can only limit the other party, set the other party's up and down to within 100, it will not affect his Internet access, and the remaining 3 trillion bandwidth is enough for you to play games.

Each router has different settings, so the best way to do this is to try it yourself.

There are also some factors that will affect the network speed, such as the aging or poor quality of the router, or the crystal head interface is not connected well or the quality is not good, which will affect the network speed. This depends on the actual situation

1. Log in to your own router first, and after entering, click Advanced Settings in the upper right corner.

2. On the advanced settings page, click Internet Control on the left, and then click Behavior Management on the inside.

3. Enable this behavior management function first.

4. In this new rule, as long as the access target is configured.

5. Click "Add New Destination" here.

Tool: Router.

The steps to set up your computer are as follows:

1. Log in to the router background management page.

2. Enter the router management account and password to log in.

4. Click "Port Filtering" to restrict the IP address that needs to be prohibited5. Click "Enable" and "Save" to turn on the port filtering function6. Enter the IP address that needs to be restricted, and then click "Save", after that, you will not be able to access the restricted IP address, if you need to restrict access to the game, enter the IP address of the game to save.

7. You can also restrict access to specific web pages through "WAN Access"8、Click "Enable" and "Save" to open the WAN access function9、Enter the web page address that needs to be restricted into the URL address column and save it.

You can directly limit the speed of the broadband, and then you can't play the game because of the network problem.

Router Rate Limiting Steps:

1. Look at the nameplate at the bottom of the router or the instruction manual to find the router IP, default login account and password;

2. Open the browser, enter the IP and press Enter to enter the router login interface;

3. Enter the default account and password;

4. Enter the router interface and find [IP Bandwidth Control] in the left menu bar;

5. [Check] Turn on IP bandwidth control, set the uplink and downlink bandwidth, and save;

6. Click [Add New Entry];

7. Set the start and end addresses of the restricted IP;

8. Click Save.

First, you need to know the IP address or port number used by VS this software.

Second, block the port and IP address used by VS, which should be supported by the router.

If you change the account and password dialed by the router to the wrong one, he will not be able to access the Internet.

Router settings refer to.

But it's possible that he will go to an Internet café and meet some of the more fun-loving people.

It's a dilemma, and it's about education.

Let him not access the Internet, set the MAC in the route to prohibit his computer....A good route can limit the bandwidth, and if it is stuck, forget it, he will not play....To check the mac of his computer, you can enter cmd in the run in the start menu of his computer, then type ipconfig all, and then make a note of his mac

No, ...Otherwise, you'll have to cut off the net...It is not possible to set it unilaterally.

Set the software of the vs platform in the computer to prohibit the run, and he won't be finished.。。。

1. Log in to the router, then click "Security Settings" in the left menu, and click "Firewall Settings".

2. In the firewall settings, select "Enable Firewall" and "Enable Domain Name Filtering".

3. Click "Domain Filter" on the left.

4. Click "Add New Entry" on the domain filter page.

5. Here you can set the time period to turn on the domain name filter, and enter the domain name (you need to prohibit access to the game), the status is effective by default, click Save.

6. After completing the above settings, you can't open the specified **.

The behavior management function of ordinary routers is relatively weak, but most of the problems of banning games are not big, even if there is no function of applying filtering, as long as the official website of the game is banned.

1. There is a telecom cat: the telecom cat --- wireless router WAN port; Wireless router LAN port --- computer;

2. No telecom cat: network cable --- wireless router WAN port; Wireless router LAN port --- computer;

Generally, the login address of the wireless router is set to admin, and the management account and password are admin by default

The computer IP and DNS settings are automatically obtained, and the router dialing is set

1. Enter the router. In the "Setup Wizard", select "PPOE dialing" (some are ADSL dialing), enter the username and password of Telecom Internet access according to the prompts, and save;

2. In "Network Parameters" - WAN Settings, select "Normal Mode", and select "PPOE Dialing" in the three options of "Connection". The next is to select "Auto-connect", save, and exit;

3. If you want to use wireless wifi, the router must have a wireless routing function, in the settings, turn on the wireless routing function, here, the wireless signal signal is changed to one of them. The strongest anti-interference.

You can also set a password for your Wi-Fi connection.