Initial contact with the position of data clerk, it is difficult to find a job

It's okay, but you have to be familiar with it.

1. The data clerk is a technical person who is responsible for the preparation, collection, sorting, file management and other internal management work of the project data. The specific work is: responsible for the collection and management of project data, drawings and other files.

2. Participate in the acceptance of sub-projects.

3. Responsible for the management of planning and statistics.

4. Responsible for the internal management of the project.

5. Complete other tasks assigned by the manager of the engineering department.

1. Collection and management of project data, drawings and other files.

2. Participate in the acceptance of sub-projects.

3. Responsible for the management of planning and statistics.

4. Responsible for the internal management of the project.

5. Complete other tasks assigned by the manager of the engineering department.

Notes:Data clerks need to pass the post qualification examination organized by relevant state departments and obtain the corresponding certificates before they can take up the work of relevant positions, and some employers do not set up independent data clerk positions. The registration for the examination of the data clerk shall be organized by the Provincial Department of Housing and Urban-Rural Development or the Housing and Urban-Rural Development Commission of the municipality directly under the Central Government, and after passing the examination, the qualification certificate for the post of the data clerk printed by the Department of Housing and Urban-Rural Development or the Housing and Urban-Rural Development Commission shall be issued.

1. Responsible for the collection and management of project data, drawings and other files.

2. Participate in the acceptance of sub-projects.

3. Responsible for the management of planning and statistics.

4. Responsible for the internal management of the project.

5. Complete other tasks assigned by the manager of the engineering department.

Security data officer? First of all, you have to be a full-time safety officer, and you will naturally be able to follow a project! It's not hard, but it's not too simple either.

The prospect is very good, from the current level of attention of the country, it is very good, as long as the information can keep up, there is no need to consider the responsibility! In addition, the data must be synchronized with the project, and the safety inspection items must be supervised and inspected, in fact, there is nothing: the safety of personnel and property, goods, environment, etc., is well controlled, and it will be maintained in the future!

Check the potential safety hazards at any time and eliminate them immediately! The following is the responsibility of the safety officer I gave you, about the work, if you don't understand, you can ask me at any time, I have done a year of safety work, I will definitely be able to help you!

Article 1: Strive to learn and master business and technical knowledge, continuously improve the business level, and do their own work well.

Article 2: Conscientiously implement the safety production guidelines, policies and relevant regulations and rules and regulations of the party and the state, and participate in the formulation of safety measures of the project department.

Article 3: Conscientiously do a good job in daily inspections, do prevention first, supervise the implementation of various safety measures and safety disclosure, stop illegal commands and illegal operations, and have the right to suspend production and organize personnel to evacuate in case of serious danger.

Article 4: Supervise, guide and inspect all production teams to do a good job in safety activities before and after classes, summarize and exchange and promote safety production experience, cooperate with relevant personnel to do a good job in new worker admission education, safety technology training and change of work education, and be responsible for the publicity, organization and safety activities of safety production.

Article 5: Participate in the acceptance of various safety facilities and mechanical equipment such as scaffolding, gantry, safety net, and dense mesh net.

Article 6: Participate in the investigation and analysis of work-related accidents and near-miss accidents in the project department.

Article 7: Complete other tasks assigned by the leader.

The data clerk is to sort out the internal data of the project, and the data clerk is also divided into quality assurance data clerk and safety data clerk.

Data clerk is one of the key positions in the construction industry. The data clerk is mainly engaged in the collection and collation of engineering data.

Specifically, it is engaged in the special preparation, collection and sorting of construction procedures, processes, processes, acceptance and other materials involved in construction projects. Including construction preparation documents, construction project quality control data, building safety and functional inspection data, construction project completion documents, as well as various acceptance documents and safety industry in the process, etc.

What does a data clerk do?

1.Detailed documentation of all aspects of the project from start to completion.

In the high-risk environment of the construction site, a small accident cannot be eliminated, and occasionally you can hear from others that there is a major accident on the construction site. After working for a few years, everyone will be strange, and it is really inevitable to knock out a tooth or break a leg. This is where the importance of information comes in.

It's like insurance. There was no accident, it didn't have any practical effect, and if there was an accident, he was your lifeline. Qualified information, that is something that can bring confidence to the project department.

2.At the end of the project, take your documents and exchange them for the title deed.

When the project is completed, you have to file your documents, which are used to prove that the project is legal and compliant from start to completion.

To sum up, one safety, one quality. Two mountains that cannot be avoided to do engineering.

The job responsibility of the data clerk is to do a good job in the data management of the project.

2.Responsible for collecting all technical data, quality acceptance records and completion acceptance data after the start of construction of the unit, and collecting relevant information in a timely manner according to the progress of the project.

3.Responsible for keeping the drawings and materials of the unit and establishing a complete file.

4.Responsible for the preparation of project construction technical plan and construction organization design, responsible for collecting, sorting and archiving data and drawings to ensure completeness and accuracy.

5.Responsible for the sending and receiving and transmission of various documents, drawings, technical solutions and other materials in the construction process to ensure completeness and timeliness.

7.Responsible for managing the project files of the unit to ensure the integrity and accuracy of the information.

8.Responsible for the collection, sorting and storage of project technical files and test and testing files to ensure their integrity and accuracy.

10.Responsible for the management of the safety technical files of the unit.

11.Complete other tasks assigned by superiors.

1.Collection, sorting, filing, archiving and storage of engineering data;

2.Collection, inspection and summary of various quality assurance materials in the construction process;

3.Recording, sorting, countersigning, copying, and distribution of various meetings during construction;

4.Sampling, inspection, result return, reporting, classification and storage of various test blocks and specimens in construction;

5.Collection, transmission and feedback of various engineering information, and timely report to the leader if necessary.

6.Some other tasks assigned by the leader.

Hello, I am glad to answer for you, the data clerk is responsible for the preparation, collection, sorting, file management and other internal management of the technical personnel of the project data, the data clerk needs to pass the post qualification examination organized by the relevant departments of the state, and obtain the corresponding certificate before being able to serve as the relevant position, some employers do not set up independent data clerk positions.

The daily work content of the data clerk is responsible for the data file management, planning, statistical management and internal management of the project. It is not difficult to get started with the data clerk, but things are complicated, most people are doing a transition, and when they are data clerks, they learn technology and management, and the drawings will naturally be understood. And different enterprises have different requirements for the data clerk, some of the data clerk to do engineering data, some of the data clerk just collect, sort, submit the data to see the requirements of each unit project, there is no difficulty most of the content is to prepare, submit, and issue.

It's good to be careful, and carelessness must be hard work. By the way, as soon as the above inspection comes, the basic data clerk has to work overtime to deal with the inspection data. Many construction sites recruit a data clerk, and by the way, the test (the work of the sample delivery officer), safety information (the safety officer is only responsible for the site), tower crane construction elevator filing, testing, and doing it together.

The specific work depends on how the company arranges, and the personnel of the project department are not complete, and it is normal to do the work of two or three people.

The key is to look at the project arrangement, the safety supervision of the early construction preparation to meet the conditions of the start of construction, the construction organization design of civil engineering, the special construction plan, the commencement report data, etc., the mid-term construction technical data, construction progress data, construction measurement data, construction quality control data, construction safety control data, the later stage is the collection and archiving of data!! For details, you can also consult the local archives and quality supervision stations.

Do data sorting, data drawings, typing, copying, data and drawing processing, company projects, and buy stationery.

The job of a data clerk (also known as an information manager) is actually very important:

1) Be responsible for the collection of all textual archival materials [to the site (such as the construction site) is to collect first-hand information].

2) Classification, sorting and storage of materials.

3) Decision-makers must rely on accurate information to make the right decisions. Thus, the data clerk is actually an assistant to the decision-maker.

4) If you put your mind to it, you can learn a lot from it. For example, Marx discovered the nature of capital from the waste paper that people discarded, and so on...