Should tiles be soaked in water? Is it better to soak tiles in water or not?

It is better to soak in water, because this is to prevent the tile from absorbing the moisture of the cement mortar when pasting, so as to avoid hollowing, cracking or falling.

Tiles need to be soaked in water before decoration, because when my home was pasting tiles, I saw the decoration staff soak the tiles in water, saying that this can increase the service life of the tiles.

Do tiles need to be soaked in water? Many people are confused, Xiao Tan teaches you a simple way.

It is good not to absorb water.

What absorbs water is glazed bricks, which is a layer of glaze on the surface of the clay after firing, and the quality is not good. Non-absorbent is all-porcelain floor tiles, ***. Exterior wall tiles are water-absorbing due to the relationship between materials, but there are standards for water absorption, and water absorption cannot be unlimited.

Too much water absorption is easy to cause the hollow drum to fall off.

The water absorption rate of this ceramic tile is relatively high, when using cement mortar paving, the purpose of soaking water is to prevent the ceramic tile that absorbs water from absorbing water in the case of not soaking in water, absorbing the water in the cement mortar too quickly after smearing the cement slurry, so as to shorten the solidification cycle of the cement mortar, causing the tile to be not firmly bonded.

Tiles soaked in water well. The main reason for soaking water in ceramic tiles is to prevent the absorption of water from cement mortar, and soaking in water in advance is to allow its pores to fully absorb water, so that when paving, its water absorption rate is reduced to a minimum. After the tile is pasted on the wall or the ground, it falls off, deformed or uneven, and if it is not soaked in water, it will greatly reduce the service life if it is too dry.

1. The delicate lines flow freely in the cracks, with rich layers and natural rhythm;

2. The irregular three-dimensional white particles are dotted and translucent, such as ancient trees, quicksand, and rivers, which are ever-changing, ever-changing, and have a natural rhythm.

3. The multi-tube cloth process of polished bricks is adopted, and the texture trend of each brick is unique, forming a natural, rich layer and changeable texture.

Marco Polo Tiles, with the mission of "creating the first world-renowned brand for Chinese ceramics". Marco Polo focused on the production of building ceramics, and in the early 90s, the first non-slip bricks and antique bricks were launched one after another, which made the brand popular. Adhere to technological innovation and product innovation, Marco Polo ceramic tiles have developed leading the development of the industry "E stone generation", "Chinese impression", geographical stone, real stone, rock slab and other high-quality products, the current products cover matte bricks, polished tiles, glazed tiles, interior wall porcelain tiles, ceramic rock slabs, granite and other categories.

After soaking in water, then use cement paste, cement in the process of drying and solidification is not easy to produce hollowing, falling off, cracks, if not soaked in water, it will be easy to produce hollowing, falling off, cracks and even bursting, so the tiles need to be soaked in water for about 12 hours before laying, or a large amount of sprinkling water after laying is OK.

The ceramic tile that needs to be soaked in water is a ceramic brick that needs to be soaked in water and the quality is worse than the tile that needs to be soaked in water, but it can meet the wall and ground decoration of the kitchen and bathroom, if the tile that is not soaked in water is used, the construction level of the construction worker is higher, and the quality of the brick is better, but the paving is not good, and it is easy to cause the tile to loosen and fall off in the later stage, leaving potential safety hazards.

Summary. Hello dear, soaking water is better, soaking bricks can allow the bricks to fully absorb water, thereby improving the cement sticking strength, and the bricks that are not soaked in water are directly paved on the wall, the bricks will absorb the moisture in the cement, resulting in a decrease in the cement sticking strength, in this case, the bricks are prone to hollowing and even falling off. However, it should be noted that when soaking in water, all the bricks are required to be soaked in water until there is no bubbling before taking them out.

Hello dear, according to the inquiry: "good soaking water" tile soaking water. The main reason for soaking in water is to prevent the absorption of moisture from cement mortar, and if it is not soaked in water, it will cause the tile to hollow, fall off, and even crack the situation.

The tile itself has a certain pores, and soaking in water in advance is to allow its pores to fully absorb water, so that when paving, its water absorption rate is reduced to a minimum. Yama type rush.

That's what I'm asking. wall tiles. Some should be sent with water first and then pasted. There is a kind of direct pasting without hair water. Which type of tile is better?

Hello dear, it is better to soak in water, the soaking bricks can allow the bricks to fully absorb the water, so as to improve the cement paste strength, and the bricks that are not soaked in water are directly paved on the wall, and the bricks will absorb the water in the cement, resulting in a decrease in the cement paste strength, in this case, the bricks are prone to hollowing and even falling off. However, it should be noted that when soaking in water, all the bricks are required to be soaked in water until there is no bubbling condition before taking it out.

Answer: Hello, fireproof tiles need to be soaked in water before, because fireproof tiles with high water absorption rate are not soaked in water, and it is easy to absorb the water in the cement and form a hollow drum. This will no longer be the case after soaking in water. Tiles with low water absorption do not need to be soaked.

Generally, the soaking time is more than 1 hour until the water is full. Generally, the wall tiles and floor tiles of the kitchen and bathroom should be soaked in water, and the vitrified tiles in the living room do not need to be soaked.

The little friends who are decorating at home will definitely encounter such a problem, when pasting tiles, whether to put the tiles in the water for a while before pasting. Maybe when buying tiles, the sales staff who sell tiles will swear that they don't need to soak in water, but a search on the Internet will see many people who say that they must soak in water before pasting tiles, otherwise they will not be firm. At this time, you may also wonder, is everyone talking about the same kind of tile?

Do all tiles need to be soaked in water? What is the reason for the tiles to soak in water? In fact, some tiles need to be soaked in water before pasting, but not all tiles need to be soaked in water before pasting.

In general, ceramic tiles can be divided into porcelain tiles and ceramic tiles. We usually mean that the bricks to be soaked in water are ceramic tiles, while porcelain tiles do not need to be soaked in water. The reason is that the water absorption of ceramic tiles and porcelain tiles is different, and the water absorption of porcelain tiles is low, so there is no need to worry about absorbing the water in the cement slurry after pasting.

Ceramic bricks are different, its high water absorption must be soaked in water before it can be satisfied, so as not to overabsorb the moisture of the cement slurry after pasting.

In other words, the reason why some tiles should be soaked in water before paving is to allow them to absorb enough moisture before paving. If the corresponding tile is not soaked in water before paving, it is likely to lead to the subsequent removal of the moisture in the cement slurry due to excessive water absorption of the tile, which will affect the adhesion ability of the tile and the ground, and further lead to cracking, hollowing and even falling off of the tile in the future.

So, how to soak the tile in water to ensure that the subsequent will not affect the tiles paving effect? First of all, it is necessary to ensure that when soaking the tiles, the embryo body of the entire tile is completely soaked in water, so that they can completely absorb enough water. Secondly, the bubble tiles can not be soaked in all the tiles, you know, once soaked in water, these tiles can not be returned, so you must ensure that the number of bubble tiles are the tiles that you can use up.

After soaking the tiles in water, you can't pave the tiles immediately, and wait until the moisture on the surface of the tiles is dry before paving.

Before the tile stickers are sure to soak in water. Because there are many fine voids inside the tile, these voids have a certain water absorption. If you don't soak in water or soak in insufficient water, you will pave it directly, and the tile will absorb the moisture of the cement, so that there will be a gap between the tile and the cement, and the bond will not be firm, and it will cause the problem of hollowing or tile falling off.

Tile soaking is to prevent the absorption of water cement mortar moisture, so as not to cause hollowing, falling off, and even cracks, especially for wall paving, before the wall paving, it is necessary to sprinkle water on the wall, which is also the reason. Ceramic tiles will have more or less certain pores, soaking in water before paving, in order to make its pores fully absorb water, and porcelain tiles due to the density is larger, the porosity is much smaller, which makes the water absorption rate very low.

After the tile is soaked in water, the color will darken, and the color will be different from that of a brand new tile. Therefore, when you are laying tiles, you should use a few pieces to soak a few, and don't soak them all at once.

Therefore, it is necessary to soak in water, but not all at once.

The material of the tile is different, most of the tiles do not need to be soaked in water, and individual ceramic tiles will be more stable and durable after soaking in water.

OneLike the general ceramic pasted tiles, they basically need to be soaked in water, so that the main purpose is that the tiles can better absorb water and can be pasted on the wall more quickly and stably before the year, and porcelain tiles do not need to soak in water, mainly with the water absorption rate of the tile has a great relationship, like some inferior tiles will make the tile surface expand and crack, affecting the use of the effect.

III believe that many people are also unfamiliar with the understanding of ceramic tiles. I also know that not all tiles need to be soaked in water. Tiles to be soaked in water, sometimes depending on the situation.

In order to prevent the tiles from absorbing the moisture in the cement mortar, causing hollowing, falling off, cracks, etc. after decoration, the tiles must be soaked. When it comes to water-soaked tiles, it means that the tiles are all immersed in water.

IIIIt can be very irresponsible to glue tiles directly to the wall. Since the tiles are not all soaked in water, in general, tiles with greater water absorption than need to be soaked, while tiles with less water absorption than are not needed. When the tiles are soaked in water, they must be disposed of.

The glaze side should be facing upwards and the ceramic side should be facing downwards so as not to touch each other and lose their original smoothness.

FourthTiles that have been immersed in water will become darker in color and the color difference will be noticeable. Because different tiles will have different water absorption, there is no specific standard. But you can judge whether it can be used based on experience, if the tiles will still blister, such as the color of the tiles soaked in water will definitely change, so when the tiles are soaked in water, don't get them all right at once, this will cause waste.

Therefore, it is best to soak the tiles in water when pasting tiles, because in this way you can make the tiles more stable when pasting, and of course, you also need to distinguish the types of tiles.

Because the quality of the tile is not the same. The reason why some tiles need to be soaked in water is because the tiles will be more stable when the time comes, in order to better absorb water.

Personally, I think that if you buy this kind of ceramic pasted tile, in order to paste it more steadily, you must need to soak in water, then our general ordinary tiles are not needed, and this is also differentiated.

Ceramic tiles are divided into porcelain tiles and ceramic tiles, and the water absorption rate of porcelain tiles is 20%, and they are generally soaked in water. Ceramic bricks are generally not needed.

Because soaking the tiles with water can be particularly durable, and especially strong, so most people will do this.

Because the tile can better absorb moisture, it can be quickly fixed on the wall when using the tile.

After the tile is soaked in water, the tile becomes particularly strong, so there will be no hollowing when it is laid.

Why do you need to soak in water when laying tiles, and what is the effect? Today is a long time to see.

After soaking in water, then use cement paste, cement in the process of drying and solidification is not easy to produce hollowing, falling off, cracks, if not soaked in water, it will be easy to produce hollowing, falling off, cracks and even bursting, so the tiles need to be soaked in water for about 12 hours before laying, or a large amount of sprinkling water after laying is OK.

If you are a traditional brick-laying method, you must soak the bricks, because the cement drying process will absorb moisture, and if the tiles are too dry, they will layer into the cement.

Why do you need to soak in water when laying tiles, and what is the effect? Today is a long time to see.

Because there are many subtle voids inside the tile, it has a certain water absorption, if it is not soaked in water and directly paved, the tile will absorb the moisture in the cement, resulting in the part of the tile and the cement connection void, the bond is not firm, the drum is hollow, the tile falls off and other problems.

In addition, when soaking the tiles in water, be sure to immerse them all in the water, do not stack the tiles and pour water on them with a water hose, so that the tiles can only be soaked, and the tiles can not be fully "drunk".

Precautions for soaking in water for tiles:

1. Water depth: The volume of the pot for soaking tiles should be large enough, and the water depth should not be lower than the height of the tiles stacked in the basin.

2. Tile stacking:

Put the tile into the basin, pay attention to the glaze side up, the pottery side down, if the glaze side down, the tile corner is easy to cause porcelain due to bumps. When removing the tiles from the basin after soaking in water, it is also advisable to glaze them face up. Because if the sharp corners of the glaze hit the ground, it is easy to knock off the porcelain.

It is best to pack the carton on the floor mat first, and place the tiles with their backs against the wall.

The water absorption rate of different tiles is different, so the soaking time is also different, the higher the water absorption rate, the longer the soaking time. Check if the tiles are "full of water", you can see if the tiles will still bubble. In addition, the seasons also have an effect.

The rainy season can be slightly shorter due to the wet weather; In summer, the material is drier and the water is easy to evaporate, so it is necessary to prolong the soaking time.

4. Water temperature: The water temperature of the soaking tile can be close to the room temperature. The water temperature should not be too low, otherwise it will affect the tile's absorption of moisture.