I want to learn how to make cross stitch and how to design and make cross stitch myself?

I've come up with my own method, you can try it. Use adobe photoshop on the computer**software one: first find a favorite one**.

Two: That's how: first open the software; After that, there is the word 'file' in the corner of the upper left in front of you, and then click the left mouse button, a vertical option box will come out, select 'Open File' and then select the ** you want to use, and then make sure, the original size ** will be out on the gray workspace, and then you can use a straight line or vertical line to play the grid; After that, I will print out the finished diagram, and I guess it will be fine.

Note: If you get an error, you can press Shift+Ctrl+Z on your keyboard.

You can undo an operation one or more times. ）

1. Fold the fabric in half twice to find the center point of intersection, and embroider the first stitch in the center of the fabric according to the requirements of the thread number marked by the center point on the drawing (each small square represents a cross needle, to ensure that the direction of the cross needle is consistent).

2. Each cross-stitch drawing has a line mark marked with a symbol or color block, and different line marks represent different colors of embroidery thread.

Three** above the mark are marked with a full needle (cross fork X), half needle (1 2X), quarter needle (1 4X) and hook edge (B ST) to be strictly embroidered according to the requirements to complete a beautiful work.

Precautions: One embroidery thread is composed of six strands, such as two strands for 14ct small grid embroidery, and one strand for hooking. If you have special requirements, please refer to the drawing.

2. The color block in the drawing does not represent the actual embroidery thread color, please carefully identify the thread number behind the thread mark, and select the embroidery thread according to the requirements of the thread number.

3. The direction of embroidery should be consistent, the center point should be determined when starting the needle, the embroidery should be moderately tightened and evenly forced, the needle or the end should not be knotted, and the thread head of about one centimeter should be set aside to press each other firmly on the back of the fabric, and be careful not to make the thread entangled into a ball.

Fourth, in order to outline the outline and make the work more distinct, the last step is to hook the edge when the embroidery is completed, generally with 2 strands of thread when embroidering with 1 strand of thread, with 3 strands of embroidery with 2 strands of thread.

Take the thread and embroider the needle method.

Stitch introduction: full needle embroidery, half needle, quarter needle, French knot.

Clean & Protect:

1. Ensure the cleanliness of your hands before embroidery.

2. In order to ensure the cleanliness and smoothness of the finished embroidered product, it should be washed separately in cold or warm water with a neutral detergent after embroidery (remember.

Do not dry clean, do not rub or squeeze) After rinsing, remove the artwork from the water and lay it flat on a pre-prepared white dry towel.

Then roll up the towel to squeeze out the excess water, put it in a ventilated place to dry, and iron it from the back after drying.

3. When ironing, you should move the iron from the back back to the back, so that the work can be smoother and will not hurt the embroidery thread.

You can find a piece of coordinate paper, enlarge the grid to the size of the cross-stitch grid on the photocopier, and then print ** on this paper;

After that, just find someone who does cross-stitch to match you with a line.

Cross Stitch Quick Start Steps:

First of all, you need to know whether your four-strand rope is still six-strand (strand means that a line contains several thin lines). Take out the thread you want to sew and divide your thread in half, dividing the four strands into two and two, and the six strands into three.

After dividing, pass one end of the thread through the pinhole, do not align, and the two ends of the thread are long and short on one side.

Then tie the long end of the thread, which is the easiest way for novices who don't want a good look on the back. After tying the knot, you can start sewing, if there is already a print, you can start sewing directly in the corresponding place. If it is unprinted, it must be carefully controlled, do not sew the wrong one, otherwise it will be a little troublesome.

Here's how to sew the knotted thread from the back and through the diagonal thread. Sewing an X-shape into the lattice will do the trick.

At present, the common embroidery methods are, buttonhole embroidery, chain embroidery, broken embroidery, flying embroidery, feather embroidery, flap embroidery, back needle embroidery, Cree embroidery, crean embroidery, cross stitch, French knot.

Full needle embroidery (x).

First put on by mesh 1, then by mesh 2, then by mesh 3, then by mesh 4, then by mesh 5, then by mesh 2, then by mesh 3, then by mesh 6, and so on.

Half-needle embroidery (1 2x).

Half needlework is made up of a diagonal line, which is half of the full needlework.

Quarter embroidery.

1 4 needle embroidery is made up of half of the diagonal, if you want the remaining part of the edge square to express different colors, you need to have 1 4 needle embroidery to express.

Three-quarter embroidery method (1 2x).

3 4 Embroidery is composed of a complete diagonal and half a diagonal line to form the shape of the "human" character.

Back stitch (edge).

The first needle comes up from mesh 1, and then goes down from mesh 2; The second needle comes up from the mesh 3, then goes down from the mesh 2, and then goes up and back to the mesh 3 from the mesh 4, except for the first needle, each other stitch is returned to the mesh that was originally worn in the way of returning the needle. The return needle is generally used to embroider threads, contours and letters.

Francis Hold the needle up to the 1 position and thread it, wrap the thread around the needle, and insert the needle into the 2 position. Hold the end of the embroidery thread with your non-embroidery fingers, pull the knot tight, and then thread the needle through the fabric and hold the thread until it must be loosened. If you tie a large knot, you can increase the number of strands of the line appropriately, but only wrap it once.

Flat petal needle.

Thread the needle from the position of 1 and wrap the thread back, then thread the needle from 1 and out from 2, press the thread wound back, tighten the thread into a petal shape, and thread the needle from 2.

There are many rules for cross-stitching, the most important of which is that it is a self-entertaining activity, and you can do it as you like, without having to follow any rules, including everything that will be written later.

If the thread is not enough, go to the shop where you bought cross-stitch and match that number of thread.

Buy a cross-stitch design of white du with a lot of small and fine grids of special paper, and then draw the pattern you want, or through photoshop processing, divide your picture into a lot of small grids, print out, according to the printed drawings, and then embroider according to the cross-stitch production method.

That's what I did.

If there is a special cross-stitch design software, it will be automatically designed, including drawings, the number of threads and the amount required. You can also change the number of lines, which is fairly simple.

This first needs to cross-stitch professionally designed software, and finally find a professional manufacturer.