The infinite router has a signal, full grid, but just no traffic

The wireless router has a signal, full grid, but that's the traffic reason:

Cause 1: The network line is faulty.

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Cause 2: The router has an incorrect Internet setting and you need to reconfigure the router.

Solution: Reset the router and set dialing again.

Reset Router Method:

Method 1: There is a button [RESET] button on the back of the router, press and hold for 5 seconds, and the indicator light on the router panel will be off and then on, which means that the settings have been reset.

Set up router dialing:

The IP and DNS settings of the computer are automatically obtained.

1. Open the browser - enter the general router address is this or view the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

2. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter your Internet username and password according to the prompts, and save.

3. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

1. Change the password and rule out whether anyone is rubbing your net.

2. Change the encryption mode to eliminate the slowness caused by the encryption mode conflict.

3. Upgrade the software version of the router to eliminate the cause caused by the old software version of the router.

4. Connect the number on the external line separately to see if it is still slow, if it is to contact the broadband operator for detection.

Restart the router,Restart the computer,The router's sending packets are set to 1476 (I forgot how many of these),This you check on the Internet,It has a relationship with your network provider,As long as the setting is a little smaller, it's no problem,In addition, someone may use your network,Change the security mode,Passwords and the like are no big problems。

Will the same happen if you connect directly to the router with a network cable?

If you have data on your mobile phone and cannot access the Internet, it is recommended that you troubleshoot the problem in the following ways: Check whether there is a network, and it is recommended that you use it in a place with a strong signal; Check whether there is still a credit in the account, if the balance is insufficient, you need to recharge and restart the phone; Confirm whether the parameters of the mobile phone have been set; Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing; Check whether there is a problem with the mobile phone, it is recommended that you change the phone for testing; In case of traffic capping, it will also lead to the inability to access the Internet; The number has not been registered with the real name, and the real-name registration has not been completed within the time limit, and the service will be suspended; If you applied for a 4G** upgrade last month, it will take effect this month, and you will need to restart your phone before you can access the Internet. 2. If it is not the above situation, it is recommended that you contact the local Unicom customer service for consultation, and the actual situation is subject to the local policy.

If you have any questions, click here. Consultation.

The router is a device between the broadband and the Internet terminal, you can connect to the router, only to the mobile phone or computer to the router is no problem, no network also to check whether the router is normally connected to the network.

You can look at the status of the WAN in the settings of the router, and if the dial-up fails or something, you have to find the reason for the broadband.