Little Swan How to fix the leakage on the drain valve cover of the washing machine?

There is no way to repair the drain valve leakage, just replace it with a new drain valve. Because there is a rubber pad inside the drain valve, this rubber pad is used to seal it. When this rubber pad ages, the drain valve will leak.

However, this rubber mat is not sold, and it can only be replaced with a new drain valve.

Summary. Jianghu Baixiao will answer for you: This phenomenon is caused by the chronic air leakage of the water level switch, and the water ingress phenomenon caused by the poor sealing of the fastening iron ring.

The maintenance method is very simple, you can use wire cutters to re-tighten the iron ring to make it tight. If the rubber mold has microporous air leakage, then only one water level switch can be replaced. It's best to have some of these small accessories at home in case you need them.

In addition, if the sewage outlet of the Little Swan washing machine leaks, it is generally the failure of the drain valve and the need to reinstall and replace the valve.

1. The cause of water seepage in the drum washing machine - the drainage rubber bowl is damaged;

2. The reason for water seepage in the drum washing machine - the spring elasticity is reduced, so that the compression between the water glue bowl and the drain is not enough;

3. The reason for water seepage in the drum washing machine - the path of spring compression and extension deformation is slightly deviated from the central axis of the spring, so that the drainage rubber bowl cannot be pressed on the drainage port in the middle position.

The drain cap of the Little Swan washing machine still leaks after being tightened.

Jianghu Baixiao will answer for you: This phenomenon is caused by the chronic air leakage of the water level switch, and the water ingress phenomenon caused by the poor sealing of the fastening iron ring. The maintenance method is very simple, you can use a wire cutter to re-tighten the iron ring to make it tight.

If the rubber mold has microporous air leakage, then only one water level switch can be replaced. It's best to have some of these small accessories at home in case you need them. In addition, if the branch base of the sewage outlet of the Little Swan washing machine leaks, under normal circumstances, the drain valve is faulty and the valve needs to be reinstalled and replaced.

1. The cause of water seepage in the drum washing machine - the drainage rubber bowl is damaged; 2. The reason for water seepage in the drum washing machine - the spring elasticity is reduced, so that the compression between the water glue bowl and the drain is not enough; 3. The reason for the water seepage of the drum laundry machine - the path of the spring compression and extension deformation is slightly deviated from the central axis of the spring, so that the drainage rubber bowl cannot be pressed on the drain in the middle position.

The drain cap is still leaking after being tightened.

Hello, what do you use to tighten the drawbacks, you can use wire cutters to re-tighten the iron ring, so that it can be tightened. You can also use Line 8 to confine it a few more times, and there will be no problem.

I'm afraid I'll break it if I've screwed it.

I clenched it with my hands.

You can wrap several layers of sealant around the inside of the interface, so you can also use the hand to twist it will definitely not hit the effect of imprisonment, try it with pliers.

The steps to disassemble the drain valve for cleaning are as follows:

1. First of all, use a screwdriver to remove the lower baffle, as shown in the figure below.

2. Next, remove the black plastic baffle of the drain valve (hold both ends with your hands and break them off) as shown in the figure below.

3. Then, use a "Phillips screwdriver" to remove the fixing screw (this part is the connecting part between the roller and the rubber pipe of the drain valve) as shown in the figure below.

4. Next, remove the fixing screws of the 4 drain valves (one at each corner) as shown in the figure below.

5. Finally, hold the two ends of the drain valve with your hands, pull out the "drain valve" downward, and clean up the debris in the drum. Clean the drain valve, restore the original state of the machine, and start the machine for operation.

Open the backsplash of the washing machine, find the drain valve, and then pick up the piece and pull it outward. A few days ago, the electromagnet of my little swan automatic washing machine was broken, and the drain valve could not be opened automatically, so I put the water out.

Put the washing machine to sleep, open the low lid, unscrew the two gongs that hold it in place with a sleeve of 10, and remove the drawstring from the water valve.

This brand has two different models, which need to be distinguished by high-collapse shirts:

1. a roller. The drum washing machine does not have a drain valve, so the highest point of the drain pipe needs to be 60-80cm above the ground, and it must be connected to the buckle before being discharged into the sewer. If you don't, you're going to drain the water while it's getting in.

2. a sleeve cylinder. The sleeve washing machine has a drain valve, and once there is dirt stuck in the drain chamber valve, there will be water leakage.

As long as you remove the back cover, find the drain valve as shown in the picture, and unscrew the drain valve where there is a handle, and you can clean it. Of course, if it's not good, you have to change it.

Data Development:

1) Basic structure of washing machine:

comprise plastic cylindrical inner cylinder and the outer cylinder of the drum made of metal with at least one drain opening, described inner cylinder and outer cylinder are adapted, described inner cylinder is made up of base, cylindrical inner cylinder and port ring, one end of cylindrical inner cylinder is connected with base, the other end is connected with port ring, described cylindrical inner cylinder is made up of 2 or more side wall plates and 2 or more convex ridge plates are joined with each other, described side wall plate is the arc plate with four contour edges, and its four contour edges are connected with base, port ring and convex rib plate respectively, and be provided with a connecting structure, the plate is provided with a plurality of dehydration through holes, the convex ridge plate is the circular arc plate with the convex ridge in its middle, its four contour edges are connected with the base, the port ring and the side wall plate respectively, and are provided with the connection structure, the plate is provided with a plurality of dewatering through holes, when the side wall plate and the ridge plate are connected with each other to form a cylindrical inner cylinder, the convex ridge on the convex ridge plate protrudes to the cylinder, and plays the role of lifting the rib plate.

2) Washing machine maintenance lubrication:

In order to make the washing machine run for a long time and make it normal and easy to use, it is necessary to carry out correct lubrication and maintenance on time, the main places that need to be lubricated are bearings and gears, and the bearings need to be injected with L-TSA22 anti-rust and anti-oxidation lubricating oil with good wear resistance and oxidation stability from the oil injection hole, generally refueled once every 2-3 years, and refueled once a year if general mechanical oil is used. The gears should be lubricated with No. 2 extreme pressure lithium grease with good adhesion, or zinc dialkyl dithiophosphate with good oiliness with 1% mass content, or MOS2, L-CKC100 medium extreme pressure anti-wear gear oil with 3% mass content for lubrication. The bearings and gears of the spin dryer should be added with L-AN15 and L-AN68 lubricating oil with good oxidation, anti-rust and anti-wear properties every year or half a year.

If a sealed rolling bearing is used, it should be sealed by the bearing factory with a service life of more than 1000 hours, polyurea-based thickened refined petroleum lubricating oil, and No. 2 grease with anti-rust and antioxidant added.

Kiss is happy to answer for you, if the drain leaks when washing clothes in the Little Swan washing machine, it is recommended to take the following steps to solve the problem:1Stop using the washing machine:

First of all, you need to stop using the washing machine and unplug the washing machine to avoid short circuits or other dangers caused by electrical appliances. 2.Check the drain connections:

Check the drain connection for looseness, deformation or cracking, and if so, need to be replaced or repaired in time. 3.Clogged pipes:

The drain pipe may be blocked by clothing, dirt, fibers, etc., so the water cannot flow out, so you can use a pipe tool or disassemble the pipe to clean it. 4.Cracked drain pipes:

If the drain pipe breaks, Huili needs to replace it with a new one. 5.Washing machine water level adjustment:

Check that the water level in front of the washing machine is not too high, and if so, you can adjust the water level of the washing machine so that it does not exceed the height of the drain pipe. If the above methods cannot solve the problem, it is recommended to contact Little Swan after-sales customer service for repair or replacement parts. At the same time, in order to avoid similar problems, it is recommended to clean the drainage pipes regularly and do not let debris, dirt, etc. clog the pipes.

Hello, dear, 1. The cause of water seepage in the drum washing machine - the failure of the sail - the damage of the drainage rubber bowl; 2. The reason for the water seepage of the drum washing machine - the spring elasticity is reduced, so that the compression degree between the water glue bowl and the drain port is not enough; 3. The reason for water seepage of the drum washing machine - the path of the spring compression and extension deformation is slightly deviated from the central axis of the spring, so that the drainage rubber bowl cannot be balanced and tightened on the drainage port in the middle position.