-
SC typeConstruction hoistsThe service life of the SS type construction hoist is controlled at 8 years, and the service life of the SS type construction hoist is controlled at 5 years, both of which are calculated from the factory time. If the service life is exceeded, it shall be reported to the local construction safety supervision station, and it can be continued to be used only after it has been assessed and qualified by a qualified evaluation agency; However, the total service life is controlled within 10 years, and more than 10 years must be scrapped and destroyed.
The information of the construction unit generally includes these:
1. Engineering quality control data: including units, divisions, sub-items, and inspection batches.
and other construction quality acceptance records and verification.
2. Engineering and technical control data: drawings will be reviewed.
Technical contact change, structural testing and construction and supervision related technical documents in the construction process.
3. Engineering survey data: foundation groove line inspection, elevation overmeasurement, positioning, and pay-off.
Wait. 4. Raw material inspection data: material entry certificate, raw material second retest report, finished product and enough accessories testing test report (test block, steel joint, etc.).
-
The testing life of the material hoist is generally two years.
Gongyi Yili hoist equipment.
-
The function of the material hoist is to transport or convey the material to a high place, and it is recommended to refer to the means of transportation
Regulations for the Implementation of the Enterprise Income Tax Law
Article 60 Unless otherwise stipulated by the competent financial and taxation authorities, the minimum period for calculating depreciation of fixed assets is as follows: 4) 4 years for means of transport other than airplanes, trains, and ships; 。
Of course, you can also deal with it within your company according to the length or shorter of this year. However, if it is too short, it will require a tax increase.
-
After filing, it is necessary to submit the inspection information to the local competent department, and it can be used only after passing the inspection! The inspection information is different from place to place, so it is recommended that you go to the local security checkpoint and ask
-
The material hoist is a kind of mechanical conveying equipment with fixed devices, and how long the service life of the material hoist is the concern of the user.
1. The service life of SC type construction elevator is controlled at 8 years.
2. The service life of SS type construction elevator is controlled at 5 years.
3. The material hoist is a kind of mechanical conveying equipment with fixed devices, which is mainly suitable for the continuous vertical lifting of powdery, granular and small materials, and is equipped with safety protection devices such as broken rope protection safety devices, docking safety devices, buffer devices, upper and lower height and limit limiters, and anti-loose rope devices. The term of service refers to the number of years prescribed or as a general standard.
The above is the introduction of how long the service life of the Wuli early material hoist has been regretted.
-
Service life. The service life of SC type construction hoist is controlled at 8 years.
The service life of the SS type construction hoist is controlled by the state system at 5 years.
The material hoist is a kind of fixed device of the machine wild jujube shelter conveying equipment, mainly suitable for the continuous vertical lifting of powdery, granular and small pieces of materials, and is set up with a broken rope protection safety device, a docking safety device, a buffer device, an upper and lower height and a rock loss limit limiter, an anti-loose rope device and other safety protection devices.
The term of service refers to the number of years prescribed or as a general standard.
-
The function of the material hoist is to transport or convey the material to a high place, and it is recommended to refer to the means of transportation
Article 60 of the Regulations for the Implementation of the Enterprise Income Tax Law Unless otherwise stipulated by the competent financial and taxation authorities, the minimum period for calculating depreciation of fixed assets is as follows: (4) 4 years for means of transport other than aircraft, trains and ships;
Of course, you can also deal with it within your company according to the length or shorter of this year. However, if it is too short, it will require a tax increase.
-
This depends on what material and how well it is maintained.
FM-3B3 chain bucket hoist produced by Foshan Fuyide Machinery is mainly used for food, crops, pharmaceutical, chemical products with good fluidity. For example, potato chips, peanuts, candies, dried fruits, frozen foods, vegetables, chemicals and other granular or lumpy products convey materials vertically from low to high.
Product performance: 1The hopper is made of food-grade polypropylene (PP) material casting mold, which has the characteristics of beautiful appearance, not easy to deform, and high and low temperature resistance.
2.The bucket elevator can be perfectly used for continuous or intermittent conveying and can be equipped with other feeding equipment.
3.The chain bucket elevator is easy to assemble and disassemble, and the hopper is easy to clean.
Optional: 1Carbon steel.
2.Multiple outlets.
According to customer drawings, special customization.
1. Responsible for the safety production of the personnel in this position. Conduct safety inspections once a week, organize a safety meeting every month, conduct oral training and assessment of safety fingers for employees every month, and pay attention to the mental state of employees to ensure safe production of personnel. >>>More
Here's how to deal with it:
Allocate other units for use or trade with other companies for processing. >>>More
If you want to do a good job in production management, it is essential to do a good job in material management. If thousands of materials only rely on the material name, specification, etc. as the management basis, and there is no material code code that can be used as a unique identification, then the final material management is chaotic. Therefore, in order to achieve scientific and efficient material management, coding materials is the foundation. >>>More
This is a very profound examination, I am very ashamed of the mistake I made this time, I really should not ignore what the teacher said, I should not disobey the teacher's words, we as students should completely obey the teacher's words, and I did not pay attention to what the teacher said this time. I believe that the main reason for this major mistake is that my ideological consciousness is not high enough, and my understanding of important matters is seriously insufficient. I've been thinking about it since I got home: >>>More
Production control (PC) is to do production planning, also known as production control, the main purpose is to ensure the production plan and production schedule control. The purpose of material control (MC) is to reduce inventory while ensuring that production is met. To reduce the pressure of funds, the main functions are material planning, requisition, material scheduling, material control (bad material control and normal incoming and outgoing material control), etc. >>>More