What are the specifications of sprayed cable tray?

Usually the models of cable tray are divided into: trough type, tray type, ladder type.

The different materials of the cable tray are divided into: galvanized tray, stainless steel 304 tray, aluminum alloy 1060 tray.

The surface treatment process is divided into: fireproof baking paint, electrostatic spraying, hot-dip galvanizing (hot-dip galvanizing) Common specifications are: (width * height * thickness is: national standard thickness).

300mm*100mm*

400mm*100mm*

500mm*100mm*

600mm*200mm*

800mm*200mm*

1000mm*150mm*

1200mm*200mm*, etc.

Spray trays are: spray trough bridge, spray ladder bridge, spray tray bridge and so on.

The following are some commonly used specifications of spray tray:

80mm*60mm spray tray.

100mm*50mm spray tray.

150mm*100mm spray tray.

300mm*100mm spray tray.

400mm*100mm spray tray.

There are three models of sprayed cable tray: trough type, ladder type, and tray type.

The common specifications and thicknesses of sprayed cable trays are:

Width * Height * Thickness).

<>200mm×80mm*

200mm×100mm*

300mm×100mm*

300mm×150mm*

400mm×150mm*

400mm×200mm*

500mm×150mm*

500mm×200mm*

600mm×100mm*

600mm×200mm*

800mm×300mm*

1200mm×200mm*

The specifications of the sprayed tray are generally (length, width and thickness).

50mm*100mm*

100mm*100mm*

200mm*100mm*

400mm*200mm*

800mm*200mm*

<> sprayed cable tray.

The latest thickness standard refers to "JB T10216-2013 Cable Tray for Electronic Control and Power Distribution".

The width of the spray tray W 150 is up to a standard thickness of mm.

150 "Bridge width w 300 The standard thickness should be up to mm.

300 "Bridge width w 500 The standard thickness should be up to mm.

500 "Bridge width w 800 The standard thickness should be up to mm.

The width of the bridge W 800 is required with a standard thickness of up to millimeters.

The above is the national standard thickness of the sprayed bridge).

Introduction to spray tray:

Spray trough tray: Galvanized trough tray is processed with a layer of electrostatic powder coating.

The shape of the trough bridge is like a box, sealing the environmental protection cable (line), the shielding performance is very good, and the electrostatic powder spraying effect is blind, electrostatic, rust-proof, increasing load capacity, waterproof, etc., electrostatic spraying.

After treatment, the cable tray itself has a smooth appearance, color matching, and the installation greatly improves the aesthetics.

Spray pallet tray: electrostatic spraying.

Raw galvanized pallet tray.

Its main features are: enhanced corrosion resistance, aging resistance, and increased adhesion.

You can also choose the color you like to match the architectural design as the exterior style of the Differential Posture Bridge.

Sprayed ladder bridge: Sprayed ladder bridge adopts galvanized ladder bridge processing surface treatment.

A layer of electrostatic powder coating, the appearance is very smooth and beautiful, after careful oil, dust, polishing, to ensure that the powder coating shell, push into the 200 °C baking paint god furnace cycle for about 20 minutes to cool and keep warm, greatly improve the wear resistance and bearing strength of the bridge itself.

The above is the basic introduction of the spray tray material, the spray bridge is an upgrade of the galvanized bridge, although the appearance is the same, but the performance is better.

Uses: basement parking lot, workshop power transmission, personalized hotel, large shopping mall (the project building is beautiful and different colors), etc.

Usually the models of cable tray are divided into: trough type, tray type, ladder type.

The different materials of the cable tray are divided into: galvanized silver xun tray, stainless steel 304 tray, aluminum alloy 1060 tray.

The surface treatment process is divided into: fireproof baking paint, electrostatic spraying, hot-dip galvanizing (hot-dip galvanizing) Common specifications are: (width * height * thickness is: national standard Labozhou thickness) 300mm * 100mm*

400mm*100mm*

500mm*100mm*

600mm*200mm*

800mm*200mm*

1000mm*150mm*

1200mm*200mm*, etc. Wheel shielding.

Spraying cable tray is to spray "plastic powder on galvanized tray", Chun Naikong is a kind of surface treatment square blind method.

Strengthen the corrosion resistance, water resistance, anti-static performance of the bridge itself, improve the aesthetics of the bridge, and match the design sense of the oak eye of the construction project, and the color can be selected.

Sprayed cable trays are: sprayed trough tray, sprayed ladder tray, sprayed tray tray and so on.

First of all, it depends on which models and thicknesses you need.

The following is a **reference for some commonly used sprayed cable trays with different thicknesses:

80*60 sprayed cable tray; Thickness; Yuan meters.

100*50 sprayed cable tray; Thickness; Yuan meters.

150*100 sprayed cable tray; Thickness; Yuan meters.

300*100 sprayed cable tray; Thickness; Yuan meters.

Wholesale price reference of spray cable tray:

80*60 sprayed cable tray; Thickness; Yuan meters.

100*50 sprayed cable tray; Thickness; Yuan meters.

150*100 sprayed cable tray; Thickness; Yuan meters.

300*100 sprayed cable tray; Thickness; Yuan meters.

Spray trough tray by galvanized trough tray after processing a layer of electrostatic powder spraying, trough tray shape like a box, sealed environment to protect the cable (line), shielding performance is very good, with electrostatic powder spraying effect, anti-static, rust, increase load capacity, waterproof, etc., after electrostatic spraying processing, the appearance of the tray itself will be relatively smooth, with the color matching, the installation of the completion of the appearance of the aesthetic greatly improved.

80*60 spray trough bridge; wall thickness; Yuan meters.

150*100 spray trough bridge; wall thickness; Yuan meters.

150*100 spray trough bridge; wall thickness; Yuan meters.

300*100 spray trough bridge; wall thickness; Yuan meters.