How long should I take care of my Mido watch?

Mido Watch Service Center: 400-659-0877

Mido Watches is one of the most famous Swiss watches in the world. Since its inception in 1918, Mido Watches has become an iconic brand in Swiss watchmaking by drawing inspiration from famous architecture, combining exquisite watchmaking technology, excellent fully automatic mechanical movements and high-quality materials.

The movements used by Mido are Swiss ETA movements that have been re-polished. However, because the balance wheel rubs against each other more than 10,000 times per minute, the movement is susceptible to wear and tear. This is where the lubrication of the oil is crucial, as it can greatly reduce the wear caused by friction, thereby protecting the movement and extending the life of the watch.

Over time, however, the oil will dry up and the wear will gradually increase. For this reason, regular maintenance and surface oil are very necessary.

Most watch lovers would normally advocate that their watch be returned to the service center for service every three years. But it depends on the situation, in addition to waterproof, it is also necessary to prevent collisions.

On a scale that can only be afforded, it is not harmful to have two or three watches swapped in daily life: wearing a mechanical watch during dynamic movement, such as improvising over time, can help extend the service life of the watch.

1. The watch that is worn every day, it can also be said that the watch does not leave the hand for 365 days, if you find that the error of the watch is very large, or the watch is water, it is best to send it for repair and maintenance; If everything is fine with your watch, it's best to have it serviced every three to five years; Some people's watches do not leave their hands, a wear is more than 10 years, this is not the way to wait for the watch, because of long-term use, the lubricating oil of the watch will still be lost or dried up, in the case of oil loss, it will accelerate the wear of the shaft; There are quartz particles in the air that we can't see with the naked eye, which will adhere to the oil, and if you don't maintain it for a long time, and let the watch keep going, it will only accelerate the wear and tear of the shaft; Some people wear it for 10 or 20 years, and the watch will go when they never want to maintain it, and when it fails, many parts have been seriously worn, and after maintenance, its accuracy will be greatly reduced, which is not as good as a new watch.

Summary. Hello, I will answer the maintenance fee of Mido five or six thousand watches:

The cost of a Mido watch maintenance ranges from 100-200 yuan.

Partial maintenance services for your timing products include the following:

1.The function of the movement is checked according to the Mido quality standard.

2.Clean the case and metal band.

3.Replace the crown, pushers, calibrators, crystals (except for specially shaped mineral and sapphire crystals), gaskets and, in the case of quartz watches, batteries.

4.Inspect and repair the waterproof performance of the above parts and test them according to the specifications of the MIDO product.

5.Final technical and visual inspections are carried out in accordance with the Mido quality standards.

A comprehensive maintenance service for your timing product includes the following operations:

1.Open the case; Remove the crown and winding shaft to allow access to the movement, as well as the dial and hands.

2.Divide the movement into individual components, inspect the movement and replace worn components, clean, oil, assemble, adjust for accuracy, verify movement function according to MIDO quality standards or change the movement to clean the case and metal strap.

3.Replace the crown, pushers, calibrators, crystals (except for specially shaped mineral and sapphire crystals), gaskets and, in the case of quartz watches, batteries.

4.Inspect and repair the waterproof performance of the above parts and test them according to the specifications of the MIDO product.

5.Final technical and visual inspections are carried out in accordance with the Mido quality standards.

Mido five or six thousand watch maintenance fee.

Hello, I have seen your question and am sorting out the answer, please wait a while

Hello, for you to answer the Mido five or six thousand watch maintenance fee: the cost of Mido watch maintenance is 100-200 yuan, and the local maintenance services for your timing products include the following:1

The function of the movement is checked according to the Mido quality standard. 2.Clean the case and metal band.

3.Replace the crown, pushers, calibrators, crystals (except for specially shaped mineral and sapphire crystals), gaskets and, in the case of quartz watches, batteries. 4.

Inspect and repair the waterproof performance of the above parts and test them according to the specifications of the MIDO product. 5.Final technical and visual inspections are carried out in accordance with the Mido quality standards.

A comprehensive maintenance service for your timing product includes the following operations:1Open the case; Remove the crown and winding shaft to allow access to the movement, as well as the dial and hands.

2.Divide the movement into individual components, inspect the movement and replace worn components, clean, oil, assemble, adjust for accuracy, verify movement function according to MIDO quality standards or change the movement to clean the case and metal strap. 3.

Replace the crown, pushers, calibrators, crystals (except for specially shaped mineral and sapphire crystals), gaskets and, in the case of quartz watches, batteries. 4.Inspect and repair the waterproof performance of the above parts and test them according to the specifications of the MIDO product.

5.Final technical and visual inspections are carried out in accordance with the Mido quality standards.

[Room 2513, 25th Floor, Diwang Building (Shun Hing Plaza), No. 5002 Shennan East Road, Luohu District, Shenzhen, Guangdong Province] will answer for you.

1. If the watch is used frequently, it is inevitable that there will be scratches on the watch glass. If there are slight scratches on the watch, you can put a few drops of water on the scratches first. Then apply a small amount of toothpaste to a soft-bristled toothbrush and gently wipe the scratches to remove the scratches.

2. Please try to keep the watch away from sharp objects to avoid violent impact. Long-term use of the watch will cause the waterproof seal to deteriorate, so it is recommended to have a waterproof inspection every year. It is also necessary to stay away from solvents, perfumes, cosmetics, etc., which contain chemicals.

3. If there are deep scratches on the watch, it needs to be polished. I suggest you go to the regular name watch after-sales service center, you are fooled during maintenance, or the watch can't **.

Answer: If the Mido watch is flooded or the battery is replaced, it may cost about 100-400 yuan. If the leather strap is replaced or the watch is broken, it may be more expensive, requiring thousands of yuan. The maintenance of high-end watches is also about 1,000 yuan, and the comprehensive maintenance is more expensive.

In order to avoid being deceived during maintenance or causing irretrievable damage to the watch, if you need repair service, please look for a regular after-sales center.

Depending on the specific model, such as quartz watch or mechanical watch, classic big three hands, complication model, etc., the cost of maintenance of different watches is different, ranging from about 600-1300 yuan. It is recommended to go to a professional watch shop for maintenance.

The complete warranty service for your watch offered by a professional watch dealer includes:

a) Basic movement maintenance services, which are limited to the defects in the manufacture of the watch movement itself or the dysfunction of the watch movement itself;

Checking the function of the movement and disassembling the movement as necessary;

Replace the weathered waterproof ring, depending on the condition of the movement, replace the necessary worn and aged movement components;

b) Appearance maintenance service:

cleaning of the case, strap and buckle;

Conduct waterproof testing;

The watch is tested to ensure that it meets the reliability and functionality standards set by the brand.

Daily maintenance of the watch:

1. Do not put the watch on the stereo or TV to prevent magnetization.

2. Do not put the watch in the wardrobe with mothballs to prevent the watch oil from deteriorating.

3. Do not touch the watch with corrosive substances, especially acidic substances, which will corrode the case.

It is not difficult to take care of your watch on a daily basis, as long as you can do these things on a regular basis, you can trust that your watch can always be kept in the best working condition.

If you want to do maintenance, you can go to 2606, Block B, China Resources Building, Qianjiang Road, Jianggan District, which is reasonable, professional technology in place, and the service and environment are very comfortable.

The cost of watch maintenance: the dismantling and cleaning fee for ordinary watches is 770 yuan, and if it is a gold watch, the dismantling and cleaning fee is more than 800 yuan. According to the regulations of the watch industry association, tens of thousands of yuan of watches, in addition to the dismantling and cleaning fees, should also be charged according to the watch introduction grade** and other inspection fees of one thousandth.

For mechanical watches that are not worn for a long time, they should also be wound regularly to allow the mechanism to rotate. As for quartz watches, their battery life is generally 1 to 2 years, and the battery should be replaced regularly, and the sealing ring should also be replaced when the battery is replaced.

The warranty interval for Mido watches is about 3-4 years. Mido watches need to be maintained for about 3-4 years, and everything in the movement needs to be maintained, washed and so on. Generally speaking, if the watch is used frequently, the maintenance interval should be advanced.

If it is idle and has not been used, the liquid should be maintained regularly to extend the service life. In addition to professional comprehensive maintenance, daily maintenance should also be noted.

Mido watch daily maintenance:

1. The watch should be kept clean, and occasionally wiped with a clean cloth, so that the dust of the watch will be reduced a lot, and the appearance of daily wear is relatively bright.

2. The watch should be kept dry, not often let the watch touch the water, wash your hands and so on are generally fine, take a bath and swim and do not wear the watch, unless it is a watch for diving.

3. The watch should avoid collision, which will directly affect our movement, and the serious watch will be hung up directly.

The purpose of caring for the watch is to prevent the internal parts of the movement from being worn out for a long time or not being suitable for use, so that it can be used for a longer period of time. If you don't take care of it for a long time, the internal movement parts will wear out even deeper, and even if you try to save it, it will be in vain.

Mido mechanical watches are suitable for biennial maintenance.

Maintenance methods and precautions for mechanical watches:

1. Non-professionals should not open the back cover to prevent dust from running into the movement and causing damage to the movement.

2. It is forbidden to adjust the time between 10 p.m. and 2 a.m.

3. Adjustment of strap length: Slightly adjust the position of the movable buckle pin, and greatly adjust the strap to disassemble and assemble the strap grain.

4. After the watch is scratched out of a lot of lines, you can drop one or two drops of water on the watch, and then squeeze a little toothpaste to wipe it, remove the scratches and make the watch as new.

5. Medium and high-end watches should be maintained accordingly every two years or so, replacing waterproof components, testing the timekeeping performance and power consumption of the movement, cleaning and maintaining the movement, and cleaning the appearance.

6. It is best to place desiccant in the place where the watch is placed, but avoid using mothballs, insect repellents and other chemicals.

7. The watch should not be used in an environment with a strong magnetic field, nor should it be subjected to strong impact or **.

8. Any watch should not be worn when swimming or in a humid environment, and the handle should not be pulled out in a humid environment.

The maintenance fee for Mido 56000 watches needs to be determined on a case-by-case basis. The cost of maintenance depends mainly on the make, model and type of service required for the watch. Mido 56 Potato Fighter Thousand Watches are usually mid-to-high-end watches, and their maintenance costs are relatively high, but the specific cost needs to refer to the actual situation and needs.

Watch care is an important maintenance job that allows the watch to extend its lifespan, improve precision and accuracy, and maintain its appearance and value. Maintenance services typically include internal movement cleaning, lubrication and calibration, replacement of parts, case and strap cleaning and polishing, etc. The content and cost of watch maintenance services will be slightly different for different brands and models.

By extension, the warranty time of the watch is usually 2-5 years, depending on the frequency of use, the environment, and the maintenance history. When using the watch, you should also pay attention to details, such as: prevent collisions, falls and other external factors, avoid water vapor and magnetic fields, etc.; It should be worn regularly at ordinary times, and avoid not wearing it for a long time or changing it frequently in a short period of time; Prolonged exposure to sunlight or high temperatures should also be avoided.

In short, the maintenance fee of Mido five or six thousand watches needs to consider the brand, model and needs, and the specific ** may be slightly different. The regular maintenance of Shushu watch is also a necessary measure to prolong the life of the watch, so that the silver digging needs to pay attention to the details and environment to maintain the accuracy and value of the watch. <>