Ask the majority of table tennis enthusiasts to recommend a group of table tennis positive and negat

The front and back are long, and the bias control should be a defensive style of play, and there is no need to use such an expensive bottom board, just use a galaxy MC-2 for dozens of dollars is enough meat.

You can choose the butterfly's Li Ju bottom plate, Korbel bottom plate, and butterfly king bottom plate. Nitaku's bird's baseplate, acoustic guitar baseplate, violin baseplate. Ai Fukuhara uses an acoustic guitar baseplate, which is very easy to control.

I'm also playing the right glue, I use Haifu Li Jiawei's dolphin I think it's very good The bottom plate you can use STIGA's cl-cr-wrb I tried it very good If you use the long glue, it is recommended that you use Ai Fukuhara's butterfly earth, I heard that there is a feeling of reverse glue, and the long glue is strange It should not be 1000 pieces here, about 600 700 pieces.

The long backhand requires a certain hardness of the baseboard, and it also needs to ensure the quality of the forehand curling ball, and I recommend the Nitaku birdie for you. The price is also appropriate, and it feels good. You'll know it when you use it, and it's definitely suitable for your playing style. Hope it helps.

Stika, forehand madness 3, backhand butterfly!

1.The bottom plate of table tennis is roughly divided into pure wood and fiber. The pure wood board feels delicate and has enough strength; The fiberboard has a clear feel, a large sweet area, and a high fault tolerance. Therefore, amateur golfers prefer fiberboard, while most professional teams are pure wood.

2.The pure wood board is divided into five layers and seven layers, the five layers are thinner and softer, which is suitable for arc circle play; The seven layers are stiffer and suitable for fast-break arcs.

4.Fiberboard: The most classic fiberboard is the butterfly king. Aryl carbon mixing, paulownia wood large core, is almost the standard configuration of fiberboard now.

5.In fact, each of so many classic rackets is very good, and you don't feel good about using it, mainly because you don't have a good rubber. We all know that "soft paddle with hard rubber, hard paddle with soft rubber", in fact, it is not so simple to match at all.

You need to consider the weight, the overall deformation, the hardness of the surface material, and the ball speed.

The forehand is also a coat, these inside, the violin is an arc ring plate, nano is a carbon plate, the gap is very large, you see that since you have a two-year coat, then the bottom plate does not need to be very hard, you can try the violin, the feel of the jacket is not as good as the national set, so it is recommended to buy a pure wooden board, then you can look at the three pieces of Nitaku, your pull down spin is exactly the kind of pull a board plus turn, and then play with the opponent after the attack or to the pull, or like to punch a downspin and then force the play, straight or horizontal.

According to your own situation, you can choose the rubber as the configuration.

1.Among the three sets of rubber in the Dornick S series, the S1 set of rubber is on the hard side as a whole, and the control will be weaker if it is configured on a hard board.

2.S3 is softer and has strong rotation, which is a classic arc trap rubber.

3.The sponge hardness of the S2 set of rubber is exactly between S1 and S3, which can not only arc quickly, but also not bounce randomly. In addition to being used for forehand setups, more and more players who are looking for a steady style of play are also using the S2 set of rubber for backhand setups.

1. From the point of view, 54 yuan is very low, and the general online shopping is about 60, and our physical store here is 65.

2. The red mad three is a little faded, which is normal. In terms of weight, I can only say that the third is the heavier of the rubber, and the landlord can fill the rubber to make it expand before pasting the rubber, and then cut off more points to reduce the weight. The non-stick rubber surface is already a major "feature" of the current crazy three, the landlord should not be entangled in this, the quality of the crazy three is not good now.

3. I don't know if this "oil" is the performance after wiping the water, if so, it is the coating on the surface of the rubber, which is normal.

4. There should be no "chirping" sound when the new rubber rubs the ball, and this sound will only have when the rubber has been oxidized for a long time. 729-2,33 yuan is about the same.

I judge, it should be true. In fact, it's only 87 yuan, don't worry about it, let's concentrate on practicing your skills!

1. All ordinary people will not buy very expensive rackets when they play, but if you want to get started, the rackets you buy will still be within 200 yuan. Here is an introduction to a configuration of less than 200 for you.

Base plate: Jinji 3

Forehand: Neo Soars 3 39 degrees.

Backhand: Shoot Leo CJ8000 two-sided arc type.

I think this configuration is a very cost-effective one within two hundred, the production and quality of the base plate are good, and ** is also very cheap, less than a hundred, the attack and defense are very balanced.

Forehand Neo soared 3 39 degrees, the arc ball is very easy to pull, the attack is very good, and it is a very famous rubber.

Finally, considering that most people use less backhand, here is a more basic rubber, CJ8000, which is enough to deal with general backhand attacks and the like, and the elasticity and friction are also good. ~~

Happy exercise

It depends on what you have and what you need, and there is no best base plate for playing the game. Their own rubber, base plate, and glue are all configured according to their own technical characteristics.

For DIY, you need to choose the base plate and rubber according to your playing style. For beginners, it is recommended to use 729 sets of glue, which is not high, very affordable, and cost-effective. At the same time, it is recommended to use the Galaxy series baseplate, which is of high quality and low price, has a clear feel and a powerful shot, which is very suitable for cultivating the feel and is conducive to mastering new technologies.

After the level is raised, choose a higher level of base plate and rubber.

The following configurations are recommended:

1.Entry-level configuration, you can learn, master, and consolidate your table tennis skills. Its configuration is as follows: Galaxy N10 baseplate +729 universal two-sided. Although it is cheap, it is cost-effective and suitable for novices.

2.Kuaihu configuration. Galaxy N4 baseplate +729-2+729 popularization.

3.Higher-level configurations. The configuration is, Galaxy T10+ 729-802, suitable for amateur players with a certain foundation.

FYI.

Hello landlord;

Motherboard; Galaxy M5 baseplate, similar to the design of STIGA CL, but ** is much lower, is a recognized cost-effective racket, fast.

A weapon of attack. This Galaxy M5 is really good to use, the feel is very clear, and the push is very powerful. So you can use the Galaxy M5.

Rubber; Forehand; Your style of play should be 729 802, which is transparent and stable, especially suitable for forehand fast attack play (no arc circle).

Backhand; Anyway, you don't have to stick a long rubber sponge to occasionally use him to catch unfamiliar or special turns of the serve (inverted board).

I think this configuration is quite satisfactory. And good value for money!!

Well, if you don't understand anything about this question, you can ask it, if you are satisfied, remember to adopt If you have other questions, please adopt this question and click to ask me for help, it is not easy to answer the question, please understand, thank you! (Bye!)

It is recommended to use a Milky Way, with a thickness of 7mm or more, such as N4. If the level is not high enough, it is recommended that the rubber be controlled with a low degree; The level is high, the degree is higher, the speed is fast, and the attack power is strong.

The single cypress racket is indeed the most straight shot and single-sided fast attack, but I estimate that you should not use 9mm, so I still recommend 7mm. As for the rubber,Although the crazy three is indeed the favorite of the public now,But it's still too arcing.,So it's recommended to use the Tianji.,On the other hand, I don't know if you use it frequently.,So I can't explain.,F1It's not very recommended.,On the one hand, it's expensive.,On the other hand, F1 is too brittle.,Almost a bump on the edge.。 Having said that, the most important thing is to suit yourself, so if you have a ball shop nearby, you should try it yourself.

At present, there are fewer rackets used for single-sided play, it is recommended that you use a single cypress racket with a thickness of more than 9mm, there are some skilled craftsmen on the Internet who make their own, the quality is OK, and the cost performance between 100 and 300 is better. Rubber is recommended for Hurricane 3.

The single cypress racket is definitely a weapon for direct shooting and single-sided fast attack

Stika CL pure wood classic, Liu Guoliang's previous baseplate, suitable for direct shooting fast attack type play, cost-effective, enduring. The rubber is DORNICK F1, which is fast and flexible, which will be of great help to your technical application. If the hard F series also has F2 and F3 to choose from, the hardness decreases in turn, it is recommended to try the golfer's racket before buying, you often play around must have people who have studied this aspect, try more and ask more is a shortcut to buy a suitable racket for yourself!

What are the characteristics of the front and back glue of table tennis rackets?

Recommended content. What are the characteristics of the front and back glue of table tennis rackets?

What are the characteristics of the front and back glue of table tennis rackets? Such as rotation, speed, control.

Positive rubber is also called short particle rubber, characterized by good elasticity, fast speed, stable hitting, no turning, suitable for near the fast attack, especially the left push and right attack type of play, is one of the most commonly used types of rubber for straight board fast attack players, in the past Zhuang Zedong, Li Furong, Jiang Jialiang, Xie Saike and a large number of world champions have used positive rubber sponge direct shooting. Today's world champion Liu Guoliang also uses this type of rubber.

If you feel that your wrists are flexible, but your arms and waist are not strong enough, it is best to choose a positive rubber racket with speed to win.

At present, there is a kind of medium particle rubber between short particles and long particles in the international market, which has the peculiar effect of non-spin attack, and the opponent attacks the strong volley or downspin ball, this kind of rubber is not afraid at all, and it is not spinning the ball in the past, and it is erratic, so that the opponent can not make it hard. It's known as the "magic rubber".

Anti-glue is characterized by strong spin force, stable hitting and easy control, and is suitable for arc circle or arc circle combined with fast attack type play. It is also the preferred type for beginners due to its stable hitting and good ball control. For professional players, there are a variety of anti-rubber sponge rackets with different properties to choose from, such as strong adhesive rubber and soft and thick supporting sponges, so they have good "biting" and "wrapping" characteristics.

The reverse sponge rubber is the most commonly used rubber for straight and horizontal players, almost 100% of European players use this kind of rubber, and nearly 80% of Asian players also use this kind of rubber. Because this kind of rubber is a good balance between speed and rotation requirements.