The correct way to use the rice cooker, how to use the rice cooker and the steps

How to use Joyoung rice cooker.

Rice cookers are a good helper that every family can't live without. Today, let's talk about how to use it correctly. Hope it helps.

Method steps.

1 6 Step by Step Reading.

Take out the inner liner of the rice cooker and pour in an appropriate amount of rice.

Then pick up the water and wash the rice.

2 6 Pick up the water and wipe the bottom of the pot clean.

Once the rice is cleaned, take in a small amount of water and start cooking.

Before cooking, wipe all the moisture around the inner tank clean, so that it will not affect the use of the rice cooker.

See 1 image remaining.

3 6 Put the inner tank in the pot.

After wiping the liner dry, you can put the liner into the shell of the rice cooker.

Turn the inner pot around to see if it is stable, and put the bottom of the pot in the center steadily.

4 6 Connect to the power supply.

Once it is stable, you can close the lid.

I connect it to the power supply and turn the place with the indicator light to the button to cook the rice.

Generally, a gentle downward pressure is sufficient.

5 6 rice cooker tripped.

Rice cooker tips: After the meal is ready, don't be in a hurry to unplug the power.

In the equal division in the unplugged power, stuffy meal.

When boiling the pot, you should stay away from the mouth, because the water vapor in the pot is very hot.

6 6 common sense of the use of rice cookers.

When the rice cooker is cooking, the small eyes above it will constantly steam out.

Don't touch this bubbling place, it will be very hot.

Rise around, don't have anything. So as not to affect the exhaust, affect the use, and it will be very unsafe.

Let's ask a question. I'm done.

Just heat it up.

Is that the key pressed too?

Question: Are you sure?

The normal way to eat a rice cooker is to soak the freshly bought rice cooker in salt water and sterilize it, then put it in for a period of time before conducting a tentative trial, and then start using it normally.

2. Put the rice into the pot and wash it well, and put the appropriate water.

3. Then wipe the water outside the pot bladder dry.

4. After the pot is dry, put it back into the electric pot and cover the lid, press the incense bomb to cook.

7. Wait for the time to be zero, the heat preservation button can be lit, and the rice will be cooked.

How to use the voltage cooker is:

1. Before use, first check whether the exhaust pipe hole is unblocked, and then put the food into the pot, but the food should not exceed four-fifths of the pot's capacity. Then close the lid and turn the lid in the direction of "off" indicated by the arrow on the lid until the two handles coincide completely;

2. Put the inner pot into the outer pot, wipe the inner pot and the heating plate clean before putting it in, and no sundries should be placed in the outer pot and the surface of the heating plate; After inserting, gently rotate the inner pot left and right to ensure that the inner pot is in good contact with the heating plate;

3. When closing the lid, check whether the sealing ring has been put into the inner steel ring of the lid, rotate the sealing ring left and right by hand to make it freely and evenly placed on the steel ring, cover the lid, and then rotate the lid counterclockwise to the buckle position, and hear the "click" clasping sound, and when you see that there is vapor stably discharged from the exhaust pipe, then buckle the pressure limiting valve on the exhaust pipe. On the pressure limiting valve, no other weight should be added, let alone replaced by something else. The time for steaming all kinds of food is specified in the instructions, which should be strictly controlled and cannot be arbitrarily extended to avoid accidents;

4. Turn on the power supply, the boost light is on, and set the pressure holding time according to the food.

Ask the rice cooker to appear E four, what is the situation.

Cooking is broken.

Hello answer, glad to answer for you. When the E4 appears on the display screen of the rice cooker, the reason is usually that the pressure switch is damaged, and the way to deal with it at this time is to first cut off the power of the rice cooker and open the lid along the edge of the rice cooker lid with a sharp object. During the opening process, you must be very careful not to injure some of the temperature control lines.

Immediately after that, all you need to do is find the burned temperature control wire, reconnect it with insulating tape, and finally close the lid and reconnect the power supply, and the rice cooker can start working again.

If the solder joints of the power strip are broken, or the solder joints in the control set are broken, related errors may also be reported. In this case, you need to contact the maintenance personnel of the relevant brand for repair.

Question: I bought it in August, I should change it.

Just look for him for a change.

The use of the rice cooker is very simple, you can put water or rice into the rice cooker, and then turn on the start button at this time, it will automatically cook rice is more convenient.

How to use a rice cooker? The method used in the rice cooker is to put rice in the pot, then put it in the pot, plug the rice cooker into the power and press start, and you can do it.

The use of the rice cooker is very convenient, you can read the instruction manual in detail, there are detailed instructions for use in the manual.

The rice cooker only needs to turn on the power and put the food you want to make into it and add a small amount of water, if not, you can take a detailed look at the operating instructions.

Rice cookers have refrigeration buttons, you want to cook rice or porridge, just look at the corresponding buttons.

2. The surface of the inner tank and the electric heating plate should be kept clean to avoid poor contact.

3. It will automatically trip only when cooking rice, and if it stews other food, it will automatically cut off when the water is dry. Therefore, you should master the heat and unplug the power plug in time.

How to use a rice cooker? This is very simple, if you don't understand, you can find someone to teach you, or read the manual to use it.